Finally a video that shows how to install a WOT box. After watching this, it seems pretty straight forward. I watched a few other guys try and make an install vid and it seemed like they overcomplicate the process. Thanks for this. How do you guys like it so far? Any major difference in feel of the car when shifting?
Thank you man. We will definitely have a lot more vids on the sn and termi in the near future. You can definitely feel the shifts are faster with the no lift. Launch control helps just need to have right tire set up to to bring down spinning even more
Stang Domination I appreciate the videos cool to see other Ford mustang guys doing good work. Can’t stand Chevy assholes. I don’t know what it is but I do not get along with Chevy dudes. Cocky jackasses.
The 3 splice Connectors we used work fine. They still had good connection on this car. Before you clamp the connector down just make sure the wires are sitting where they need to be so you get a good bite when you go to clamp it down
Do you have to plug it into the laptop to get the 2 step too work? I just installed this and everything works but the 2 step. Do you have to set up the two step in order for it to work? Also i re spliced the yellow wire like 3 times.
Finally a video that shows how to install a WOT box. After watching this, it seems pretty straight forward. I watched a few other guys try and make an install vid and it seemed like they overcomplicate the process. Thanks for this.
How do you guys like it so far? Any major difference in feel of the car when shifting?
Thank you man. We will definitely have a lot more vids on the sn and termi in the near future. You can definitely feel the shifts are faster with the no lift. Launch control helps just need to have right tire set up to to bring down spinning even more
Good video. I'll be installing this on my cobra soon
Rick Wilkinson appreciate it
I hate electrical and you guy made this look easy
Rick Wilkinson yea it can be a headache from time to time. glad it helped you out.
I wish I found this last night! Awesome vid very straight forward. Thanks guys.🤙🏼
OH/PENN Moto *OBP* always find what you need after the fact ha. Thank you too.
@@StangDomination
Q
We
I installed mine on a 2008 cobaltss turbo n it spits flames 🔥 lol 😆 an my launches are on point and my no lift shifts are like butter
That’s cool! I always
Wanted a 2 step in my car
Derpy Derp appreciate you taking the time to stop by our channel. Hope it helps out on trying to install one in your car in the future.
Stang Domination I appreciate the videos cool to see other Ford mustang guys doing good work.
Can’t stand Chevy assholes. I don’t know what it is but I do not get along with Chevy dudes. Cocky jackasses.
@@derpyy4577 ha its the ultimate car rivalry.
What does 2 step mean?
King Kev 2 step is launch control. You set a rpm you want the car to be at when you take off from a stop
Thanks bro doing mine tomorrow!!!
You’re welcome. Glad it helped you
Do you need a computer? Very very detailed video thank you!
Can you still install one of you have a cable trottle not wire
Any idea why it would cause fuel to end up in my intake ?
Just finished installing mine 🔥🤝 but my computer died before I could get er’ completely setup.
This thing is a lot of fun once you get to use it. It just died out of no where?
Yeahh the battery was low but now I gotta work out some kinks, may have wired TPS the wrong way.
@@bankbrot.e.0.n927 that sucks. you change out the alt on that thing?
Negative. I need to though fr lol. So you do any dig racing?
after having this in the car for a few years is this worth it?
You think I can put a wot box in my 3.9l mustang
Cool 👍🏽
How did the connection with the splice pieces inside the cabin hold up?
Michael Taylor they’re still good.
since you just used connectors did you still get good connection? or did you have to go back and fix it?
The 3 splice Connectors we used work fine. They still had good connection on this car. Before you clamp the connector down just make sure the wires are sitting where they need to be so you get a good bite when you go to clamp it down
What’s then little blue clips you put on the wire called ?
The Tap splice connectors
@@StangDomination oh I forgot but I got it installed on my stock gt 04 only got a performance intake does it mess up the engine or anything ?
Would this be the same for a 2003 gt?
^^?
Pretty sure it would be the same harness. I’d check the PIN number on all the harnesses and see if it’s the same color wire.
Do you have to plug it into the laptop to get the 2 step too work? I just installed this and everything works but the 2 step. Do you have to set up the two step in order for it to work? Also i re spliced the yellow wire like 3 times.
Yes, that’s where you make adjustments
Tune is not required is it ? Simple installation?
EAbraham.R no tune required. Just download their program to set the rpm limiter. This vid should make it a simple install
Hey man installed as the video and instructions on lmr and when I turn the box on it blinks instead of staying still
Haated 97 what year are you installing on? The sn95 have different colors for the PIN number than the new edge
Stang Domination do you have Instagram it will be easier
Haated 97 yes we do. It’s stang domination
Can u do this on v6
Haha Yea but check directions
is this the same for 96-04 gt?
Not to sure on that. Would have to check the pins but also the wotbox website might have a diagram or instructions on it
Is the install the same for a 97 Cobra?
Yes. The ecu PIN number is the same but the wire wil be a different color
@@StangDomination Thanks for the quick reply! Awesome video, straight forward no bs
Appreciate that thank you
Was it worth it ?
It takes some getting use to but I think it was definitely
@@StangDomination I think I will buy this next week for my vw
Just did this and the blue light didn't even turn on
It was on the right green?
@@StangDomination this also is happening to me it won't power on
Sucks thier is no how to videos for fox bodys
Most definitely in the future we’ll have one up. Got one waiting to be installed
@@StangDomination where are you located my brother has a 93 cobra and wants get on installed
04