Side by Side comparison between the Taran Tactical Innovations Benelli M2 shotgun and the Benelli M2 3 gun addition. Trigger test and comparison coming soon! THUMBS UP THE VIDEO and Subscribe Now ! www.youtube.com...
Well I really love your Shotgun, thanks for a fantastic job and a really fast turnaround time to boot ! Hope to find you all at a match one day to thank you in person !
When that second shotgun came into frame I was like "Whoa", that's a nice weapon. Benelli does a good job right out of the box but yeah, they did a nice job on the upgrades. I'm sure your a proud owner of both!
@@WTFSoCalJesus Christ you guys deserve tyranny if you actually follow the rules. When I've gone to USPSA competitions in California everyone has PCCs in illegal configuration. From young guys to old fudds. Literally zero reason to follow these unjust laws.
Goodness gracious, I didn't think a Benelli could be more awesome! I was wrong, both of those are works of art-I'm in love. Thanks for sharing, now I have to clean off my keyboard from all the drool.
Great video thanks for posting. Question: once you add the extended mag onto the M2 does the gun then need further changes to comply with 922R? Thank you
So here are a couple of questions. One. With either the +7 or +8 magazine tube, are there plugs to make them +2 hunting compliant? The reason that I ask is this I purchased one and wanted to only plug it in for a couple of times a year I get to go duck hunting. Two rreally excellent guns by the way.
the tubes unscrew from the main tube in about 12 seconds so if it were me, I would ditch the long boy and just put the OEM spring and cap back on and go that route... Less crap hanging off the front of the gun to get tangled in brush and what not as well... nice question! thanks man !
Not 30 years... Benelli custom shop does the bevel by hand, they use a jig so they are consistent. Benelli doesn't bend barrels after they are treated, it causes fractures. It is done before it becomes "custom."
@@WTFSoCal that i am aware of, they offer 21, 24 and 26. ive been trying to decide myself between them. 24 inch is flush with 9+1 total capacity, 26 inch is flush with 10+1 capacity 12+1 would extrude 7 inches past 24 inch and 5 inches past 26 inch. if running a briley 3 gun choke(extrudes 2 inches) that would further even things out between the barrel and the gun. Most 3 gun competitors run 24 inch because with an extended choak it sits flush with 10+1 but since 3 gun rules have changed and most places allow unlimited tube length with a start of 8+1 in the gun and the ability to load 4 after the start, 12+1 has become the go to....thus, many guys are moving to 26 inch barrels as it does not effect length of the gun(tube still sticks out past) and added weight is minimal at worst (couple ounces and actually helps with muzzle rise). As to how the 24 vs the 26 shoot for you....ymmv
That is some good motivation for 3 gun as you sir have a very nice pair of goodness there...Nice detailed info as appreciate you taking us thru those shotguns....Good stuff...
So is the TTI version worth the $500 premium over the 3-gun? Yes I just checked yesterday. $2999 for the TTI, $2499 for the 3-gun. I'm going to order the TTI.
WTF SoCal we really love your video, thank you!
Well I really love your Shotgun, thanks for a fantastic job and a really fast turnaround time to boot ! Hope to find you all at a match one day to thank you in person !
@@WTFSoCal I love your videos as well
When that second shotgun came into frame I was like "Whoa", that's a nice weapon. Benelli does a good job right out of the box but yeah, they did a nice job on the upgrades. I'm sure your a proud owner of both!
oh yea ! Im a happy camper :-)
Love the bespoke one. The stippling looks like it would work great
As far as I know, tube fed is not subject to the ten round limit, only removable magazine firearms are
only if its a pump or a lever action... I spent hours searching that....
Please prove me wrong - please please please - I want more :-)
I'm finding the same info you probably found in your search, only rimfire and lever action are exempt...sorry man, my bad =(
NOT AT ALL BROTHER, this is how we learn !!!
@@WTFSoCalJesus Christ you guys deserve tyranny if you actually follow the rules. When I've gone to USPSA competitions in California everyone has PCCs in illegal configuration. From young guys to old fudds. Literally zero reason to follow these unjust laws.
Goodness gracious, I didn't think a Benelli could be more awesome! I was wrong, both of those are works of art-I'm in love. Thanks for sharing, now I have to clean off my keyboard from all the drool.
hahahahaa Get a place matt next time LOL thanks man
I really like the looks of that TTI! Beautiful guns!
thanks dude !
Great side by side, I love what he did to the loading port! I think it's well worth the extra cabbage
Glad you think so!!! I think I would get a 26 inch if I had to do it again, i didnt want to wait though....
Some nice shotguns there. Thanks for the comparison.
Great side by side comparison. We need to see your quad loading skills now.
I looks like that one old movie, of the train, that plummets off that bridge that had failed... :-)
Thank you so much for the comparison
glad you liked it brother man
Great video thanks for posting. Question: once you add the extended mag onto the M2 does the gun then need further changes to comply with 922R? Thank you
So here are a couple of questions. One. With either the +7 or +8 magazine tube, are there plugs to make them +2 hunting compliant? The reason that I ask is this I purchased one and wanted to only plug it in for a couple of times a year I get to go duck hunting.
Two rreally excellent guns by the way.
the tubes unscrew from the main tube in about 12 seconds so if it were me, I would ditch the long boy and just put the OEM spring and cap back on and go that route... Less crap hanging off the front of the gun to get tangled in brush and what not as well... nice question! thanks man !
WTF SoCal thank you.
Both are very nice pieces of workmanship! Good luck on the 3 gun you mad scientist you!
crazy mad ! :-)
Not 30 years...
Benelli custom shop does the bevel by hand, they use a jig so they are consistent.
Benelli doesn't bend barrels after they are treated, it causes fractures. It is done before it becomes "custom."
what barrel length and tube length? i trying to decide which barrel length to get in order to get it flush with the tube after modification
the tti was a 28 barrel and the tube was a 9 round I believe. talk to the guys at TTI they will help you , they are great and will guide you .
@@WTFSoCal that i am aware of, they offer 21, 24 and 26. ive been trying to decide myself between them. 24 inch is flush with 9+1 total capacity, 26 inch is flush with 10+1 capacity 12+1 would extrude 7 inches past 24 inch and 5 inches past 26 inch. if running a briley 3 gun choke(extrudes 2 inches) that would further even things out between the barrel and the gun. Most 3 gun competitors run 24 inch because with an extended choak it sits flush with 10+1 but since 3 gun rules have changed and most places allow unlimited tube length with a start of 8+1 in the gun and the ability to load 4 after the start, 12+1 has become the go to....thus, many guys are moving to 26 inch barrels as it does not effect length of the gun(tube still sticks out past) and added weight is minimal at worst (couple ounces and actually helps with muzzle rise). As to how the 24 vs the 26 shoot for you....ymmv
John Hou I would be scared to hit the shell tube with some of the shot.
That is some good motivation for 3 gun as you sir have a very nice pair of goodness there...Nice detailed info as appreciate you taking us thru those shotguns....Good stuff...
thanks for watching Scotty!
Great info, This was exactly what I was looking for. Thank you!
cool
So is the TTI version worth the $500 premium over the 3-gun? Yes I just checked yesterday. $2999 for the TTI, $2499 for the 3-gun. I'm going to order the TTI.
i think that is a good call !
So the TTI Benelli is legal here in SoCal? Looking to order one soon. Great video!
Damn SoCal you got some nice ass kit brother
I dont have Kids :-) jhaahahahahahahaaa
WTF SoCal your the smart one!LOL
What would the comparison be between the Benelli 3 gun and the Breda 12i?
No idea I am not familiar with the Breda :-) . thanks for watching friend !
No, It was a great video!
Both awesome shotguns!
thanks brother man ! Cheers
What is the curled piece just ahead of the receiver, mounted on the forearm?
Match saver it holds an extra round in case it’s needed
That is some really nice shot guns!
Thanks Daniel , cheers !
This really makes me want to bust out some money and buy one
Hey SoCal are you still kicking?
Great video. Is it 2800 to buy the Taran Tactical shotgun or to have him do the work on the shotgun you send him?
roughly 2800 to buy from him, basically the same to send him the M2 (1200) and then 1400 in the work
@@WTFSoCal man I wish that was still the price.. can’t find an m2 for under 2 grand right now
Pretty spiffy there Puddin'.
thanks Sweets!
Great looking shoties
thanks Don!
Great comparison!
thanks JB, cheers buddy
Sweet TTI brother.
thanks brother man
soooooo.....the other benelli is for sale for how much ?
Not so much.... I buy the guns I do cuz i like em... thats reason enough to keep em ! :-P
You need to send one to me so I can compare it to my beretta 1301
Ill get right on that
Looks good bro keep practicing quad loads
fuck yea !
Yeah that is awesome
thanks Rick!
Both are gorgeous and way out of my price range
thanks man... lets get in touch this week to see if we can meet up at Angeles....
I'm PM'd my number last night
nice!
Damn awesome
yea... i agree :-)
45 second intro
Sweetens times 2! Lol
sweetens indeed