The profiles of the extraction groove and the bullet make it look more like 45ACP than 9x19mm. (It also looks a tad large for 9x19mm, but that could just be perspective issues.) Also, rimless straight-walled (that is, as opposed to bottle-necked) cartridges like 9x19mm and 45ACP headspace on the case mouth...which is to say that the brass case must stand proud of the bullet so that it can catch on the edge of the chamber and stop the cartridge's forward travel when it's loaded. Otherwise, the cartridge would either not fit into the chamber at all (if the bullet was flush with the case because it was too big) or it would slide too far into the chamber so that the firing pin couldn't reach it (if the case was flush with the bullet because it was too small). Find a picture of a 9x19mm (also called 9mm Luger or 9mm Parabellum) cartridge and you'll see what I mean. But thanks for the video: it was excellent.
NO GLOVES TO RUN A LATHE. SMALL ONES WON'T KILL YOU, BUT THEY CAN TAKE A FINGER OR A HAND.!!!! PLEASE TAKE OFF YOUR GLOVES AND WEAR SAFETY GLASSES. I am a retired machinist and I see lots of amateur home lathe operators wear gloves. You won't do it more than once when you lose a finger.
The profiles of the extraction groove and the bullet make it look more like 45ACP than 9x19mm. (It also looks a tad large for 9x19mm, but that could just be perspective issues.)
Also, rimless straight-walled (that is, as opposed to bottle-necked) cartridges like 9x19mm and 45ACP headspace on the case mouth...which is to say that the brass case must stand proud of the bullet so that it can catch on the edge of the chamber and stop the cartridge's forward travel when it's loaded. Otherwise, the cartridge would either not fit into the chamber at all (if the bullet was flush with the case because it was too big) or it would slide too far into the chamber so that the firing pin couldn't reach it (if the case was flush with the bullet because it was too small).
Find a picture of a 9x19mm (also called 9mm Luger or 9mm Parabellum) cartridge and you'll see what I mean.
But thanks for the video: it was excellent.
That was really well done, Cheers
В перчатках на станке, наждачкой над станиной, и внаклонку над патроном... без защитного кожуха.
Я считаю - это токарный "royal flush " 😂😂😂
Best looking dummy rounds, ever!
I think people are expecting a real 9mm bullet, not a keyring
NO GLOVES TO RUN A LATHE. SMALL ONES WON'T KILL YOU, BUT THEY CAN TAKE A FINGER OR A HAND.!!!! PLEASE TAKE OFF YOUR GLOVES AND WEAR SAFETY GLASSES. I am a retired machinist and I see lots of amateur home lathe operators wear gloves. You won't do it more than once when you lose a finger.
Рубщик знает правила техники безопасности, как свои пять пальцев..
Help bullet key chain mr.
This is not a real bullet because no where to put propellant, gunpowder.
Gloves! Its a question of time until you get seriously injured. Dont wear gloves on a lathe. I cant believe it.
never ever use "sand"paper ( emery) paper on a lathe
Keychain 😂
idk why everyone uses that same stupid sound for the subscription popup, but you get one. I stop watching at two.
Aaahaa you have got proper machine so, why don't you make real Gun? Why this Play toy?
useless
What for shit is that here?
Promo-SM