LIFT AND TYRES INSTALL
ฝัง
- เผยแพร่เมื่อ 7 ต.ค. 2021
- hey guys I made this video to hopefully help people out some day and just to let you all see how my progress is going with doing up my 2016 sr5 hilux.
hope you enjoy. Remember to subscribe 🤙🏻😉
instagram: / ozoffroad_ - ยานยนต์และพาหนะ
Your suspension will settle down into a 3inch lift, but would still recommend a diff drop. My dmax needed UCA’s after I lifted it, alignment was cooked and I had really bad tyre wear. Check to see if that could be an issue too
Yeah settled pretty good mate still need diff drop and uca wheel alignment wasn’t to bad. Cheer mate
Love those rim’s mate..
Thanks mate 🤙🏻
Thanks for sharing
Thanks for you comment 😁
Any issues with balancing with the steelies? And do you notice the heavier rim with power loss or braking? being a steel rim over alloy
Yeah with the bigger wheels I would say it’s a bit slower to stop but it’s not bad and I guess it is a bit heavier cause it’s a 33 inch now with steel rims. It would be easier to tell if I just swapped from alloy to steel rims. Over all it’s not to bad tho mate nothing I would upgrade breaks and stuff for 🤙🏻
Hows it go with scrubbing mate ?
Is it bad?
And did you end up needing upper control arms
Hey man not to bad I haven’t taken out 4 weelin yet but scrubs when locked going up driveways and stuff but other than that man it’s pretty good 👍🏻 no uppers yet been doing house Reno’s before our first born come along so that’s sent me broke haha
Why didn’t you change the springs in the back
Just quick question, I’m going to get 33 inch too with 3 inch lift do I need to do body chop? To fit the wheels?
Depending on what offset your rims are mate. I have 0 offset and yes they rub but only on full lock and it’s not much.
@@Ozoffroad_ same I’m getting 33 75 16 0 offset
@@Ozoffroad_ sound good to go , appreciate :)
@@carinaliu8500 all good mate 🤙🏻
Mate, 3” inch lift
what tires size?
Is there any cut to put 35” tires or 34.4 tires
285/75/16 I don’t know about 35s mate there would be a lot of cutting involved and re gearing if you want 35s to not break stuff and feel good to drive on 🤙🏻
@@Ozoffroad_ and how about the rims spec?
16” fit to the caliper?
In these rims yes they fit but a lot of other 16 inch rims don’t fit. Dynamic 0 offset fit that’s what I have
@@Ozoffroad_ your rims
16x8 offset 0 ?
@@willyahmad1699 yeah mate
Time to swap my 2 inch for a 3 I think. Been wanting 33's for a while now.
Yeah man it’s pretty sick I’ll hopefully be getting ucas soon cause you deffs need it it you wanna do anything that’s off the road. I love the look of the muddies in 33s
OK, I was wondering what else I might need. Like if I needed extended brake lines as well and/or the diff drop kit. I did ok up the cape with the 2 inch and 32's but my bash plate copped a flogging.
Well if you have the money man I’d go ucas diff drop and break lines. And get adjustable front.
So that if you ever get pulled up by police you can drop it down back to 2 inch to clear a defect unless your allowed 3 inch where you live
Mate, I seen you at the Caboolture dump today!!
Hahah yeah that’s was me. Should of come said hi haha what car were you in.
@@Ozoffroad_ the blacked out graphite 21 hilux, with the superior set up. I knew it was you from the dented rear panel, we were behind ya at the top of the drop off spot, you went left, I would have definitely said hello.
Aww yeah nice man I can’t remember seeing that car haha aww well mate I’m always there dumping stuff. I’ll have my new tray on soon so no more dints 😂
@@Ozoffroad_ yeah, unless you had eyes in the back of your head you prolly wouldn’t have noticed, ha ha. We’ll stay tuned for the rest of the tray build uploads my man, did you level the front of that hilux of yours?
@@hamiorakaiwai not yet man I’m waiting for the new tray to go on to see what the weight is and I dunno weather to go bags or just upgraded springs. Cause I want to get a canopy as well and I tow stuff all the time the I was thinking about the air bags
Hi mate what offset are them rims ? I’m thinking of getting same rims +15 would that poke out ? I’m going to run 285x70 17r with 2 inch lift
Hey mate mine are 0 offset so if you get +15 they shouldn’t poke out at all, mine only just poke out 🤙🏻
@@Ozoffroad_ oh thanks mate that’s good to hear I’m just wanting them to line up with the flares but don’t mind a lil cheeky poke. I’ve got a 218 sr5 and the guy at the tyre shop has recommended +15 but you have 0 offset with 305’s and I’m running 285’s so I’m thinking 0 would be the go for me also trying to avoid minimal scrubbing
@@e8tmidk mine are 285 75 16 so they are still 33inch and mine stick out a little bit. positive offset will give you less poke and negative gives you more 🤙🏻 if you have flares you should be able to run more negative or run what I have and it will be legal and look good.
@@Ozoffroad_ thanks mate I appreciate the advice, just trying to have minimal rub I know the more - offset creates it.
@@e8tmidk yeah scrub sucks aye hahah mines now bad now the tyres have worn down haha
I have 2.5 inch
285/70/17 0 offset all/train
It look too small. You reckon I can go
Bigger
Anything is possible with a grinder man 😂 you probably could with a body mount shop mine still rubs on full lock going up stuff cause I don’t have a bmc yet.
Hahhaha true 😂
Thank anyway
Did you notice the fuel go down faster with this setup
Naar not really man
Are they 285/75/16?
Yeah mate
What bar is that mate?
Afn mate
Hey mate are the rims 16x8 or 16x7? Thanks
16x8 man 🤙🏻
Does it rub a lot or did you have the cut a lot out ??
Just took off the mud flaps at the front it does rub on full lock but not bad
are these KL71 ? Can you put the tire size up here please?
285/75/16 they are the mt71 mate