I have a few older airsoft guns that are not like good ones so I’m gonna do this to those, see how I like it and apply it my quality one, as well as give the older ones a nice fresh paint job
Anything different when painting a hi capa? should I use some kind of paint remover to remove the black paint before hand on my slide, slide catch etc then start this process?
If you want to go for that worn look, pay extra attention to which nail polish remover you use. Do some extra testing, to ensure the plastic is not affected!
So I'm getting a walther ppk spring pistol and i was wondering if I could spray-paint the barrel (which is orange) or the thing you pull back will be stuck. Thanks anyone who can solve this!
I have a broken BB Gun and instead of getting rid of it I'm just going to use it as a display piece. Do I still need to tape and wrap everything up or does it not matter as long as everything goes back in one piece?
Personally, I’m borderline OCD, and in order to protect every piece’s internals (handguard, stock, grip) I’d disassemble the handguard, pistol grip, receivers and remove the gear box and motor.
Can you please do a video on spray panting a clear airsoft m4 to black, like more specifically a clear body airsoft gun but the barrel and stock are aleardy black just the body is clear, thanks!
@@GhostWarriorsAirsoft bedankt voor je snelle reactie! Ik heb nog een vraag.. mag je op elke airsoft locatie in NL je eigen materialen mee nemen?zowel indoor als outdoor?
Good video, guys. We didn't even know you had a Channel. 😁 I've never done a paint job on my guns before but I've noticed that some tend to roughen the surface with some sandpaper first. And since you didn't mention that I question if that is really necessary. 🤔 | Viper out
Hey guys, thanks for the comment! I personally wouldn't come near my replicas with sandpaper. Though it does roughen up the surface, which makes the paint stick better, the whole point of this method is to make it look worn and used and remove some of the paint you've just added. If the paint starts wearing off, you'll start seeing the scratched surface of the original paint/coating of your replica. More wear = more awesome :D
@@elliotkingaby5312 I made mine to look like a plastic toy gun... But I messed up on certain parts of the gun.. it's a bit of an eye sore... How do I remove paint ( primer + paint + clear coat) off my gun? The grip is made of plastic so I can't use any Paint remover.
@@insfree It should be OK, I used to use that trick on old warhammer models I'd been asked to repaint so should work. But like I say try on a small part that won't be seen just incase.
Id just remove the gb and barrel assembly. Nothing can get inside if you do that. Also when painting there is no such thing as mistakes. Only happy accidents. That's the joy of painting. -print shoot ross
We used Fosco Coyote as the base layer (is actually looking more like FDE), and the for the darker color we have used Krylon Camouflage Brown. It is adviced to use Krylon or any other high-end spray, as they have a better nozzle. For larger surfaces it doesn’t matter if you have a crappy nozzle, but for decals or other details you want to be more precise.
Thinking about painting my modify PP-2000, it’s gbb so I would imagine the process is a little easier due to the realistic takedown. Let me know your thoughts!
I'm 2 years late to the party but I've seen people paint their real steal guns with less prep than this, just tape off anything you don't want paint on (open holes, important numbers, etc) and spray away :)
Hai Bos...😊, very nice and inspiring.. It’s really motivate me... one question please... do we need to spray with basic spray paint like epoxy or pp primer grey...? Thanks for your help..😊👍
if your are planning that paint would stick on the surface for a long time then yes you can apply primer but if your planning to have natural wear and tear on the surface no need for primer i paint my guns without surface primer but that just me
0:35 I really need to add a fleshlight on my m4 for those longer game's.
Im dead lmaoooo
Same bro
When your in a gillie suit especially I have one I would definentaly recomend
It's a fantastic idea if you get one of those Airsoft guns that simulate recoil
"Yeah bro just pick up my MILF40"
Fantastic results. Youve inspired me to try this on my airsoft rifle.
Great to hear we were able to inspire you!
You can also use a sponge and silver paint for a more metallic looking scratch pattern
elaborate :D
@@Skemr023 Put some silver paint on a sponge and just lightly stroke stroke it on parts where you want it to look used.
Better on the black stock m4
Mines naturally fucked up and used heavily. 300k.bb
I have a few older airsoft guns that are not like good ones so I’m gonna do this to those, see how I like it and apply it my quality one, as well as give the older ones a nice fresh paint job
How does it look I’m going to do this to mine when it comes from evike
Nice and clear instructions 👍🏻
Is anyone watching in 2020 and thinking to yourself: where tf do I get toilet paper
Haha, I see our video is not Corona era proof :')
Yea I got sum want sum?I actually have a lot
Yea lol
mah
No-..2021
Just spray a little area at a time, and dry off what you need while paint is still wet. Much easier and looks realistic too.
The best one I've seen so far. Not too complicated for someone trying it out for the first time. Good job!
Exactly the look I was looking for! Trying out airsofting in my 30s and I'm quite into it. Wish me luck!
Pretty simple and straight forward video. And supercool results!! Thanks. I'm gonna try with mine soon :)
Awesome! This is exactly what i was looking for. Good job
Thanks man! Glad you found it helpful!
You said fleshlight...😅
We just stick to the theory that it is due to the Dutch accent 🤣
@@GhostWarriorsAirsoft hehe ok 👌
Yeah, I know for sure that I didn’t add that
@@RetardedSealBro ?wdym are u his editor or something?
@@GhostWarriorsAirsoft so I bought one for nothing?
Thanks pal. I'm in the process of customising a Honeybager to look like a lynx cq300 from cod. Will give this a go.
Great video! I'll probably do this once my Specna Arms EDGE arrives
Love the vids, I am your 1,000th subscriber!!!
Awesome to see, thank you!
Im painting mine to fit with my ghillie, im gonna try cano wrap too, but im not sure it will work well.
Gun mounted fleshlight.... I like your style
What about things like Magazine release catches or other buttons clogging up with paint? Awesome job btw
If you spray lightly, that will not cause any issues. Any excessive paint will just break away easily, while using it.
@@UsEr242afjberguy .....cool...... i guess
@@St_Mindless masking tape should be quite obvious
What if i want to paint the ejection port i think red would look sick
Best to do it by brush and not spray to be safe
is that rifle still working? did not showed test shooting!!!
Surely is!
Anything different when painting a hi capa? should I use some kind of paint remover to remove the black paint before hand on my slide, slide catch etc then start this process?
So, why remove the inner barrel? I’m confused about its importance.
Hey, great video sound wise and visually but my question is, since mine is a cheap ABS AEG is there any precaution I should be aware of?
I would consider using primer on these and wiping the surface with alcohol first to remove any unwanted dirt
Thanks a lot!
If you want to go for that worn look, pay extra attention to which nail polish remover you use. Do some extra testing, to ensure the plastic is not affected!
if you wanted to you could take out the gear box and motor to make it alot easier
What kind of paint would I buy so I dont get that sticky spray paint feel
If you spray lightly it won’t be sticky
was this a metal gun or a plastic one? paintings method are different for each type
The rail, receivers and stock tube are metal. Stock and pistol grip are plastic. Most spray paint can be applied on both surfaces.
Anything I should cover while painting the stock? He didn’t mention anything
So I'm getting a walther ppk spring pistol and i was wondering if I could spray-paint the barrel (which is orange) or the thing you pull back will be stuck. Thanks anyone who can solve this!
What are the colours called
Krylon Camouflage brown, and Fosco Coyote have been used
I have a broken BB Gun and instead of getting rid of it I'm just going to use it as a display piece. Do I still need to tape and wrap everything up or does it not matter as long as everything goes back in one piece?
Looks awesome!
No need for scuffing or washing?
Personally, I’m borderline OCD, and in order to protect every piece’s internals (handguard, stock, grip) I’d disassemble the handguard, pistol grip, receivers and remove the gear box and motor.
Naar dit filmpje was ik al een tijd op zoek, blijkt hij gewoon op jullie kanaal te staan!
Thnx for the tips guys!!!
snowsnakeable no problem! Fijn dat we kunnen helpen!
@@GhostWarriorsAirsoft what the hell is this language
@@mh-60t We are from the Netherlands, the language you see above is Dutch!
will the paint layer be easy to scratch off?
Can you please do a video on spray panting a clear airsoft m4 to black, like more specifically a clear body airsoft gun but the barrel and stock are aleardy black just the body is clear, thanks!
Just do the same thing, but with black paint. You may need multiple layers of paint because it's clear
Cool paint job
I sprayed my airsoft m4 a matte black, but it ended up being really shiny, what did I do wrong?
Dont you need any kind of varnish?
Excellent video! I used this to paint my mk12 mod1.
whats the make of that gun?
It is a Specna Arms SA-A03
I live in the Netherlands which paint are u using ?
Apologies for the late reply:
Base layer: Fosco Coyote
Darker color: Krylon Camouflage Brown
Do you need to sand down the parts you want to paint or will it stick without doing so?
Did u use spray paint regular?
"Fleshlight"
But in all seriousness, great video!
Does the barrel really need removing?
No
Awesome video! What kind of paint do you recommend using?
Wich are the colors?
Great video it’s given me same good ideas thanks.
Thanks alot
Thanks for the very clear and helpful video
Moet in Nederland de flash hider oranje zijn?of mag je er gewoon overheen?
In Nederland is er geen verplichting om een oranje flash hider te hebben.
@@GhostWarriorsAirsoft bedankt voor je snelle reactie! Ik heb nog een vraag.. mag je op elke airsoft locatie in NL je eigen materialen mee nemen?zowel indoor als outdoor?
@@user-gu3ie Als NABV lid mag dat dat inderdaad. Er zal wel worden gemeten of je replica voldoet aan de regelementen.
What do u do if u want the Paint to stay???
Does this paint wear easily?
What rifle is this?
Good video, guys. We didn't even know you had a Channel. 😁 I've never done a paint job on my guns before but I've noticed that some tend to roughen the surface with some sandpaper first. And since you didn't mention that I question if that is really necessary. 🤔 | Viper out
Hey guys, thanks for the comment! I personally wouldn't come near my replicas with sandpaper. Though it does roughen up the surface, which makes the paint stick better, the whole point of this method is to make it look worn and used and remove some of the paint you've just added. If the paint starts wearing off, you'll start seeing the scratched surface of the original paint/coating of your replica.
More wear = more awesome :D
@@GhostWarriorsAirsoft Ok, I get it! Thanks for reply. 👍🏼 And yes, more wear is much cooler 😎🤘🏼
Very informative and clear video, thanks!
Excellent tutorial! Thank you!
why not just paint the gun and get the "many battles" effect by actually using it in many battles?
im doing this for milsim west on my krytac lvoa helped a lot thxs 😊
1000th subscriber!
Question. How come we don't need any undercoats, primers, top coat
Personally i would still use primer and top. But if u want a warn more natural ware pattern leaving them out will help.
@@elliotkingaby5312 I made mine to look like a plastic toy gun... But I messed up on certain parts of the gun.. it's a bit of an eye sore... How do I remove paint ( primer + paint + clear coat) off my gun? The grip is made of plastic so I can't use any Paint remover.
@@insfree try nail polish remover. Do it on a part thats not going to be seen incase it goes wrong
@@insfree It should be OK, I used to use that trick on old warhammer models I'd been asked to repaint so should work. But like I say try on a small part that won't be seen just incase.
@@elliotkingaby5312 thanks bruh. I was worried since I heard paint removers melt plastic...but I guess it should be fine if I'm quick to wash it off.
No sanding?
what type of paint you need to use
You can use any just no glossy paint
i wanna get these literal banana mags (yellow m4) and wanna make the gun match (maybe just a yellow splat on the mag well)
pretty awesome work. easy to redo. Thanks.
Id just remove the gb and barrel assembly. Nothing can get inside if you do that. Also when painting there is no such thing as mistakes. Only happy accidents. That's the joy of painting.
-print shoot ross
what color did you use?
We used Fosco Coyote as the base layer (is actually looking more like FDE), and the for the darker color we have used Krylon Camouflage Brown. It is adviced to use Krylon or any other high-end spray, as they have a better nozzle. For larger surfaces it doesn’t matter if you have a crappy nozzle, but for decals or other details you want to be more precise.
Thinking about painting my modify PP-2000, it’s gbb so I would imagine the process is a little easier due to the realistic takedown. Let me know your thoughts!
I'm 2 years late to the party but I've seen people paint their real steal guns with less prep than this, just tape off anything you don't want paint on (open holes, important numbers, etc) and spray away :)
What rifle was that
A HK-416
Nice job, looks great!
5:37 what did he say!!!!! 😂fleshhhh 🔦 5:37
Hai Bos...😊, very nice and inspiring.. It’s really motivate me... one question please... do we need to spray with basic spray paint like epoxy or pp primer grey...? Thanks for your help..😊👍
if your are planning that paint would stick on the surface for a long time then yes you can apply primer but if your planning to have natural wear and tear on the surface no need for primer i paint my guns without surface primer but that just me
what gun is that?
HK-416
5:31 a what now?💀
Do you need a licence to spray paint it since it looks real?
no
Ive had a huge problem with that exact gun
I bought 3 of them from 2 different retailers and all of them shot at least half a mag before it stopped shooting
I am here looking at an airsoft channel to get ideas for painting my real AR15, lol .
I dont have a gearbox in my airsoft gun
How do you do reverse shots then?
@@dabbindragon2716 It was a joke meaning I have GBBR :D
Haha, rephrasing: ensure no paint gets in to whatever mechanism that is inside the airsoft gun, that is responsible for fireing bb's :P
Nice helped a lot
Thanks, I’m gonna do this for my m16a1.
Does this method work on AK platforms?
Should do
I’m bout to do this
Tape it from the inside if your body is skeletonized
Very good
Very nice!
the gun said "you need freedom"
Nice job bro thanks for the video!💪💪💨💨🌑🌑🗣
Just like Airsoft, Spray and Pray... That you remembered too reload.
0:35 a WHAT??????
Good m16
Sounds like he said fleshlight lmaoooo🤣🤣🤣
Ok
Make sure no paint gets inside gun
Nice fleshlight
Im painting my AUG to look like a nerf gun🔥 its looking so good. Not spray painting tho!
Sounds ugly as hell.
Airsoft gun ❌ ass gun✅ flashlight❌ fleshlight✅
I’m getting my professional friend to paint mine and it’s going to be black ice from R6
Moist.
Covering up the EGA is a crime. Semper fi brothers