Creality Ender 3 broken microSD slot replacement
ฝัง
- เผยแพร่เมื่อ 20 เม.ย. 2020
- DISCLAIMER:
Due to factors beyond the control of The Author , I cannot guarantee against improper use or unauthorized modifications of this information. The Author assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The Author recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of The Author , no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Author . - แนวปฏิบัติและการใช้ชีวิต
this is amazing news to see I have shaky hands and am not the best at soldering but this looks like an easy fix to a broken slot thank you so much for this video I am definitely subscribing
Just unboxed a brand new Creality Ender 3 v2 and right at the end I discover the SD card slot is broken .... great guide
Hay contact the seller u will get a new one for free if still warenty
Same issue, haven't even printed a single thing yet
Great video! Just did this Operation on my CR-10 Max and it worked perfectly with a 0.6 mm tip at 300 °C. Thanks, I never would have tried it without your help!
Thank you! My slot just went out on an SKR 3.0 two days after the warranty expired.
Wow! You made that look easy. Nice vid. It was really educational for me.👍😄
Great video this will help a lot of people. If your micro SD (TF) card reader is still working you might want to consider using a micro SD (TF) card to regular SD card adapter. This puts all the wear and tear of inserting and removing the card on an easily replaced adapter. Some people have reported having trouble with their printers reading the card if it is swapped while the machine is powered on, but a firmware update solves this for most people anyways. Once you're sure everything is working there are printable enclosures you can install everything in and mount it to your printer. I've had a few videos pop up on my feed for the adapter mod, was thinking about doing it, but this video convinced me. Nothing good can come from me poking around on circuit board with a hot soldering iron, lol. An ounce of prevention is worth a pound of cure.
i'm impressed! Music is on point. Thanks for sharing.
Well done. Much better than I can do. Came across this because I need to resolder the USB port on mine after it just came loose. Never been very good with soldering.
Thanks. For soldering I recommend a very pointed tip especially if you have to work on smd components like usb connector.
hey mine spits the sd card out exactly like that! thanks for showing exactly how you de- and re-soldered the slot, probably won’t fix mine for a bit cause I can run off usb but I’ll post a link to a slot that fits when I do. the music is a vibe too lol
Hi, thanks for the video, where did you buy the replacement parts please?
just broke mine good guide, SMD Micro SD Socket 9 for ebay search
Clean your tip and use solder wick. No need to add more solder to it.
I had gotten a longer lk5 pro and this happened. They sent me another one that has a properly working tf card reader but it unlevels immediately after I finish leveling it.
Nice work. Could you upgrade to USBC?
How many pins is the part? I see 11 pin and 10 pin card sockets
Just built my Ender 3 Pro. Ready to print and the printer will not read the card unless I hold it in the slot. I’m beyond angry and frustrated. Poor customer service. Any ideas? Is there another way of getting files to the printer. What about the USB mini port next to the SD card slot? Ugh!!!
How to replace motor board voltage regulator?
Good video. Poor board.
I mean it’s a sub-$200 3D printer you’re not gonna get Apple or Asus levels of quality, better than a gigabyte psu tho ;)
@@stephenmusic69420 rofl as if apple is quality 😂😂.
are they 9 or 10 pin
what do i do if my sd card wont even fit into the original slot?
You must replace SD card slot with a new one
Where can i find the replacement?
On eBay
Where did you get the replacement slot?
On ebay
@@DonatoNegroDiy whats the part called pls
Where did you get the replacement micro SD from?
On ebay
@@DonatoNegroDiy would you have a link for that? I'm not having much luck sourcing them.
@@dwayneschwede3877 these might work www.amazon.com/gp/product/B00E6QKT5U/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
My sd card is readable but it still shows no tf card? I tried a new card and it does the same do you recommend swaping?
If you don't want change entire board immediately, you can try to change the microsd slot.
@@DonatoNegroDiy thank you! Will try that out.
@@DonatoNegroDiy thank you! Will try that out.
Format ad card as FAT32
@@DonatoNegroDiy whats the name of the entire board
My micro sd socket doesn't work just like yours.
Oh no it was upside down
Plan B - just remove the spring.
Where is the spring?
@@hratchk3375 Inside the slot.
2:58 finger too close for comfort
I think this broke my printer because now all I get is a blue screen.
hey ik its been months but how did you fix it ?
@@CrescentCanine I didn't fix it. I had to buy a new replacement mother board from amazon for about 40 bucks
Thank you! My slot just went out on an SKR 3.0 two days after the warranty expired.