Truck Engine Rebuild | Truck Engine Assembly Complete Video

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 มี.ค. 2022
  • #Engine #Rebuild

ความคิดเห็น • 174

  • @user-tg2pg9tr3z
    @user-tg2pg9tr3z ปีที่แล้ว +3

    ماشاء الله تبارك الرحمن تسلم ايديكم عمل فني جميل تحياتي لكم جميعا من فلسطين غزه

  • @buzza2077
    @buzza2077 2 ปีที่แล้ว +17

    I have built a few race motors and this is beyond me. Not a torque wrench in sight, no torque sequencing, bouncing the cam all over the block, and my butt puckered the whole time just waiting for a gust of wind to come through and coat everything in sandy dust 😆. Granted tolerances are much higher for race engines but still. Gotta give it to them tho. I've seen them fix shit in a few hours that would take me a week lol 😆

    • @hfraat25
      @hfraat25 ปีที่แล้ว +2

      What's a torque wrench lol. He has an air gun. 😆

    • @jeffpaggett7274
      @jeffpaggett7274 ปีที่แล้ว +2

      Totally - has to be just a risk acceptance. Done on a gravel road for 80% cheaper than net new and 4 months wait.....I would change that oil every 2,000KMS for the first few months! :)

    • @user-mx8yk8yh3f
      @user-mx8yk8yh3f ปีที่แล้ว

      이나라사정에 맞게 정비하는거니 방법이 없다

    • @hoost3056
      @hoost3056 ปีที่แล้ว +1

      My brain. My brain. I'm screaming through the phone! WHERE IS THE TORQUE WRENCH!

    • @user-xv6gy1xp6w
      @user-xv6gy1xp6w ปีที่แล้ว

      ​​@@user-mx8yk8yh3f 이나라 다른 정비소는 토크렌치 사용함
      나라얘기는 핑계일뿐😊

  • @SobolevAlexx
    @SobolevAlexx 2 ปีที่แล้ว +5

    Когда все знают что надо делать! Молодцы!

  • @UmerAbbas8
    @UmerAbbas8 2 ปีที่แล้ว +10

    Highly skilled mechanics for their level of education and learning opportunities.
    Always appreciate their hard work. 💓

  • @germanboss6794
    @germanboss6794 2 ปีที่แล้ว +2

    Ребята Вы супер! Вся работа выполнена чисто. Настоящие профессионалы своего дела.

  • @admirpinto2009
    @admirpinto2009 5 หลายเดือนก่อน +1

    Botei fé, acho bonito quando o motor pega de primeira !!

  • @k1ckyscotland988
    @k1ckyscotland988 2 ปีที่แล้ว +13

    Another great video.
    Takes my mind off all the bad things going on in the world.
    Thanks.

  • @user-ov5dz7oe9e
    @user-ov5dz7oe9e 2 ปีที่แล้ว +8

    Не, ну у них хотя бы стол имеется! Динамометрических ключей не завезли, но за стол - лайк не глядя!

    • @sergkoval2853
      @sergkoval2853 2 ปีที่แล้ว +1

      поворотный стенд- поддон бля 🤣

  • @kovacevd
    @kovacevd ปีที่แล้ว +1

    I got full recon isuzu 6hh1 exchange motor, includes rebuilt pump,new sensors etc. here in Australia, only 1 year warranty. Cost $24000 aud. Had to put my accessories on it.

  • @user-je6qk8vu1z
    @user-je6qk8vu1z ปีที่แล้ว +2

    Это один из вариантов передачи опыта от мастера ученикам, у нас это делает ПТУ

  • @edchayphone7545
    @edchayphone7545 2 ปีที่แล้ว +4

    It's a great invention, you do it best, it's great for letting you know ❤️❤️❤️💪💪💪

  • @hassanheydari3075
    @hassanheydari3075 2 ปีที่แล้ว +3

    خیلی عالی .حسن از ایران

  • @33zakb
    @33zakb 2 ปีที่แล้ว +6

    More excellent work! Always nice to see a group of people who know what they're doing at work!

  • @antonioaraujoribeironetone1064
    @antonioaraujoribeironetone1064 2 ปีที่แล้ว +3

    sou escrito em seu canal moro no brazil e gosto muito dos seus videos muito bom

  • @NhatCoKim
    @NhatCoKim 2 ปีที่แล้ว +1

    Có cái bộ vô cecmeng quá oke đó bạn

  • @timgruver5932
    @timgruver5932 ปีที่แล้ว

    The most well done assembling I’ve ever watched of these shops there. Nice clean shop and mechanics look like they are proud of their work. Clean clothing versus some of the other shops. Although I don’t think I ever saw them using a torque wrench? Most every bolt on this engine has torque specs. It was designed that way.

    • @PakistaniTrucker
      @PakistaniTrucker  ปีที่แล้ว

      Right 👍
      Thanks for watching and comments ❤️❤️❤️

    • @greenbudkelly2820
      @greenbudkelly2820 ปีที่แล้ว

      Are we watching the same video? They are working outside in the dirt.

    • @bagpuss121
      @bagpuss121 ปีที่แล้ว

      They Used One Of Those Special Air Powered Torque Wrenches .

  • @josebermudezleon9642
    @josebermudezleon9642 2 ปีที่แล้ว +5

    La persona que dirige el montaje de ese motor se le ve muy seguro y muy profesional. Felicidades.

  • @otaviosilva3883
    @otaviosilva3883 2 ปีที่แล้ว +1

    😍daora mano👍🏻👍🏻👍🏻

  • @observador124
    @observador124 ปีที่แล้ว

    Deixa o motor mais tempo ligado até regulagem final. É um remédio pra quem gosta.

  • @tienbuivan7343
    @tienbuivan7343 ปีที่แล้ว

    Các ban làm việc rất khoa học và kĩ thuật cao

  • @lesforets
    @lesforets ปีที่แล้ว

    Very good job ❤👏👏👏👏MashaAllah

  • @elmerganzan9131
    @elmerganzan9131 ปีที่แล้ว

    Its amazing talent of doing like this, thanks boss

  • @fletchb2937
    @fletchb2937 ปีที่แล้ว

    You want a torque wrench for those rod bolts and head bolts?
    Naw, just give em a few extra ugga duggas with the impact gun.
    Hey, where's the injectors?
    They're bangin around in that bucket with my box end wrenches.

  • @sonhuynhbac6936
    @sonhuynhbac6936 10 หลายเดือนก่อน

    Tôi cũng đã lắp rất nhiều các loại động cơ như vậy.

  • @miguelamaya6246
    @miguelamaya6246 ปีที่แล้ว

    AWESOME WORK...

  • @illreportbackinabit.8514
    @illreportbackinabit.8514 2 ปีที่แล้ว +5

    Does that come with an unlimited mileage, one day warranty?

  • @xshowda
    @xshowda 2 ปีที่แล้ว +11

    European mechanics be like: best we can do is a brand new engine, 20.000 dollar please

  • @johncollier7744
    @johncollier7744 ปีที่แล้ว +1

    Great video, but at the end was it misfiring?. Could be the speed of the audio, unless one of the injectors needed bleeding, but to me it wasn’t firing on all 6 cylinders

  • @clemirsouza3774
    @clemirsouza3774 ปีที่แล้ว

    Não se pode usar chave de impacto pra aperta mancais e bielas.
    Esses apertos tem q ser manual, e com uso de uma ferramenta específica.

  • @raymondjr.1080
    @raymondjr.1080 2 ปีที่แล้ว +2

    This is real mechanics at work! Pakistan and Mexico are the best mechanics in the world

  • @alessandrositon7616
    @alessandrositon7616 2 ปีที่แล้ว +4

    São todos muito inteligentes sem sombra de dúvidas serviço garantido

  • @sidds2004
    @sidds2004 ปีที่แล้ว +1

    Atleast the Con rod bolts and main bearing bolts should have been torque tightened including the cylinder head and camshaft bolts.Nice overhauling though

  • @emmottataolcom
    @emmottataolcom ปีที่แล้ว

    Fantastic skills. So impressive.

  • @akbarsyed0
    @akbarsyed0 2 ปีที่แล้ว +2

    Good mechanic and his team 👏

  • @SunaryoAzka
    @SunaryoAzka ปีที่แล้ว

    greate video for chilling

  • @hectorcardenas6616
    @hectorcardenas6616 ปีที่แล้ว

    like new from manufacture at the first try didn't fail.

  • @musayau3318
    @musayau3318 ปีที่แล้ว

    Good work

  • @coolhand66
    @coolhand66 ปีที่แล้ว

    I love your videos guys you know what I like about it especially because he you're doing it in a place that that people think you guys don't have much intelligence and we know that you're more intelligent than they think you are it's wonderful to see people doing a wonderful work it's really really cool

    • @PakistaniTrucker
      @PakistaniTrucker  ปีที่แล้ว

      Thank you so much my friend ❤️❤️❤️❤️

  • @khaliqkhan911
    @khaliqkhan911 ปีที่แล้ว

    Very good teacher that man

  • @drewmurray2583
    @drewmurray2583 2 ปีที่แล้ว +1

    curious what this costs over there?

  • @user-vp3bz2vj6e
    @user-vp3bz2vj6e 2 ปีที่แล้ว +5

    момент затяжки??? не, не слышал)))

  • @pender57
    @pender57 2 ปีที่แล้ว +3

    I’m impressed, outdoors, no lifting equipment, and no measurements. Just obvious experience. I would like to own the small rag -reused 1 liter soft drink container market tho. That guy is making out in this part of the world. Thanks for the video.

  • @robertmacdonald8447
    @robertmacdonald8447 2 ปีที่แล้ว +1

    Lets torque this up, this bolt one ugga dugga, this bolt two ugga duggas.

  • @WBT714
    @WBT714 2 ปีที่แล้ว +3

    Great job as usual. Thanks for the video

  • @theman9732
    @theman9732 2 ปีที่แล้ว +1

    ።።።why you don't tight the bolt with torque wrench?

  • @johnwelch461
    @johnwelch461 ปีที่แล้ว

    they have a outside work bench, OMG.

  • @hanneshey2318
    @hanneshey2318 ปีที่แล้ว

    von euch würde ich mir jederzeit den motor reparieren lassen top arbeit

  • @joehomes813
    @joehomes813 ปีที่แล้ว

    good job. ..

  • @MiskineGoogle
    @MiskineGoogle 2 ปีที่แล้ว +1

    Sehr gut und weiter so danke.

  • @P.thao_mon
    @P.thao_mon ปีที่แล้ว +1

    may FAW 8 tan. 6 may 1 thuong hieu rat noi tieng cua trung quoc

  • @SweetBabyRey
    @SweetBabyRey ปีที่แล้ว

    I feel like you could drop these guys and an engine on a deserted island, with no tools, and they’d still make it work

  • @isaiasbalbuena6356
    @isaiasbalbuena6356 ปีที่แล้ว

    Good job you guys 👍👍👍you’re incredibly !!!!!!!!!

  • @MohdArif-lz9bn
    @MohdArif-lz9bn 2 ปีที่แล้ว +3

    I'm from india your team and work very clean and very good 👍 but no use torruc wrench way

  • @domingocoldero4503
    @domingocoldero4503 ปีที่แล้ว

    Excelente trabajo yo no conozco ese motor pero tiene tres semejantes en uno Cummins cat y Mitsubishi canter

    • @PakistaniTrucker
      @PakistaniTrucker  ปีที่แล้ว

      gracias por ver y comentar. Su motor de camión chino FAW

  • @nrhasan7962
    @nrhasan7962 ปีที่แล้ว

    Nice

  • @user-rm3bj4tv5w
    @user-rm3bj4tv5w ปีที่แล้ว

    اعطيه نسبه نجاح 30٪100

  • @mdshahenshah7869
    @mdshahenshah7869 2 ปีที่แล้ว

    Masha Allah

  • @joelsosa4392
    @joelsosa4392 2 ปีที่แล้ว +1

    Porque no calibran los tornillos

  • @isaiasbalbuena6356
    @isaiasbalbuena6356 2 ปีที่แล้ว

    Great job you guys !!!!! Awesome 😎

  • @MuhammadAmir-dg2qx
    @MuhammadAmir-dg2qx ปีที่แล้ว

    Niceee

  • @sevensihombingchannel6031
    @sevensihombingchannel6031 ปีที่แล้ว

    Kerja yg bagus x

  • @carlosdinizdiniz3680
    @carlosdinizdiniz3680 ปีที่แล้ว

    acho os caras muito bons e sei também que eles não meio ninjas nesses trabalhos, mas não vi eles em momento algum usar um torquimetro pra dar os devidos apertos certos nesse motor, será que montaram assim ou foi cortado isso do video., mas de qualquer forma meus parabéns

  • @j.r.c.rajnandgava7686
    @j.r.c.rajnandgava7686 2 ปีที่แล้ว

    Good bhut kam is tip to iadia me nahi hota

  • @techmeister8355
    @techmeister8355 2 ปีที่แล้ว +1

    more & more power tools… could workbenches be next??👀

  • @severinodesouzalima8638
    @severinodesouzalima8638 ปีที่แล้ว

    SHOW 👏👏👏👏👏

  • @djalmavenancio4070
    @djalmavenancio4070 2 ปีที่แล้ว

    Parabéns

  • @disilberg9896
    @disilberg9896 ปีที่แล้ว

    🚩👍👍👍Молодцы класс👍

  • @lesforets
    @lesforets ปีที่แล้ว

    Do you know how to convert a scania DS9 engine from an electric pump to a mechanical pump and what are the necessary spare parts?🤔😳please

  • @walidmohamed9570
    @walidmohamed9570 ปีที่แล้ว

    ماشاء الله

  • @faisalhameed2568
    @faisalhameed2568 2 ปีที่แล้ว +1

    Very good 👍

  • @09FLTRMM77
    @09FLTRMM77 2 ปีที่แล้ว +1

    MM77 Approved 👍🏼👍🏼

  • @arfinulislam9328
    @arfinulislam9328 2 ปีที่แล้ว

    Bearing Kaisa lagaya

  • @akashmondal626
    @akashmondal626 ปีที่แล้ว

    They didn't do the spill cut off🙃

  • @jakesmith6337
    @jakesmith6337 ปีที่แล้ว

    I guess there using an air torque wrench 🤔

  • @eduardosantos-cq7qo
    @eduardosantos-cq7qo 2 ปีที่แล้ว +1

    Oie, gostei do seu canal ja me inscrevi!

  • @KTO-TO_C_TON_CTOPOHbI_3KPAHA
    @KTO-TO_C_TON_CTOPOHbI_3KPAHA 2 ปีที่แล้ว +2

    Ладно хоть клапаны отрегулировали и поставили новые прокладки. Про динамометрический ключ уже все сказали, не буду повторять

  • @0088511
    @0088511 2 ปีที่แล้ว +1

    Динамометрический ключ, что это? Самый умный дед на видео, он же самый главный почитатель пневмопистолета)))

  • @subkhanfatimah9306
    @subkhanfatimah9306 ปีที่แล้ว +1

    Kang banyk tmenya

  • @sharileeslater2791
    @sharileeslater2791 2 ปีที่แล้ว +1

    How come when rebuilding things you never see them use a Torque \\\\\\\wrench

    • @susansullivan9255
      @susansullivan9255 2 ปีที่แล้ว

      Have often wondered that myself..

    • @armedfarm3429
      @armedfarm3429 2 ปีที่แล้ว +2

      They do so many engines they do it by feel, don't like that big ass air wrench for tightening though!

  • @user-cu9zj6eu2x
    @user-cu9zj6eu2x ปีที่แล้ว +1

    ใช้ปืนลมยิงน็อตข้อเหวี่ยงไม่ได้ มันวัดค่าแรงบิดไม่ได้ บักปึก

  • @hendrypardede8134
    @hendrypardede8134 2 ปีที่แล้ว +1

    This is how to make machine repair time short, and also short in durability 😁😁😁

  • @Kosach72
    @Kosach72 2 ปีที่แล้ว +3

    Это будущие наши партнёры с Россией.

    • @amirhoseynkhanbabaei1367
      @amirhoseynkhanbabaei1367 ปีที่แล้ว

      نخیر. پاکستان همین الان دارد به اکرایین مهمات صادر میکند و حجم صادراتشان هم سنگین هست و انگستان پول تمامشان را نقد به پاکستان میدهد . بهتر است اخبار دنیا را بیشتر پیگیری کنید. سلامت باشید از ایران

  • @arischannel9232
    @arischannel9232 2 ปีที่แล้ว

    Good job 🙏👍

  • @luizabatista1860
    @luizabatista1860 ปีที่แล้ว

    Oi Boa noite costei

  • @lesforets
    @lesforets ปีที่แล้ว

    What is this engine 🤔😳

  • @isyankar4721
    @isyankar4721 2 ปีที่แล้ว

    السلام عليكم ما إسم المحرك و يستعمل لأس شاحنة ؟

  • @MrThekingofrock97
    @MrThekingofrock97 2 ปีที่แล้ว +2

    Very good but they need torque wrench.

    • @markbooe205
      @markbooe205 2 ปีที่แล้ว

      Yeah, this torquing by hand don't always work. Great job but All the dust blowing around outside while putting in the interior components, yikes. We always did that inside a garage.

    • @tonylaw196
      @tonylaw196 2 ปีที่แล้ว

      They should be scrap the chinese junk truck and buy a new one with Japanese made.

    • @browningtang5621
      @browningtang5621 2 ปีที่แล้ว

      @@tonylaw196 All Japanese junk trucks disappeared in china mainland twenty years agao and those rubbish are only for your lose country

  • @mechanicalenginezone36
    @mechanicalenginezone36 2 ปีที่แล้ว

    Bhai

  • @davidbradbury557
    @davidbradbury557 2 ปีที่แล้ว +3

    very good ,but no torque wrench in sight

  • @mdshahenshah7869
    @mdshahenshah7869 2 ปีที่แล้ว

    Wow beautiful works

  • @vishalsircnc
    @vishalsircnc ปีที่แล้ว

    मैं भी इंजन का काम सीखता हूं चाचा जी

  • @rahimshaikh7370
    @rahimshaikh7370 2 ปีที่แล้ว

    Bhai apki pas mujhi lagnatha kampar

  • @omcbob37
    @omcbob37 2 ปีที่แล้ว +6

    The way these guys started off with air impact wrenches instead of the usual L-handle socket wrench, I thought they were pretty uptown and we would finally get to see a torque wrench in use. But not to be.

  • @oberstleutnant787
    @oberstleutnant787 ปีที่แล้ว

    FAW + First Auto Works of China. So an assembly of Chinese made engine.

  • @stuartarestad7768
    @stuartarestad7768 3 หลายเดือนก่อน

    Buy the mechanic 50 steak kebobs and you will get a rebuilt motor in Afghanistan.

  • @aivartromp1194
    @aivartromp1194 2 ปีที่แล้ว +1

    6-7 man around the engine like bees

  • @Diesel.engine.outlet
    @Diesel.engine.outlet 3 หลายเดือนก่อน

    Xichai 6df2

  • @antonioaraujoribeironetone1064
    @antonioaraujoribeironetone1064 2 ปีที่แล้ว

    liguage portuquese

  • @wt2179
    @wt2179 2 ปีที่แล้ว

    トルクレンチ無い世界か。
    耐久性低いだろうな。でまた適当な修理で治すと。

  • @moslemuddin9329
    @moslemuddin9329 ปีที่แล้ว

    Mitsubishi 6 D 15