Great, I did a very similar setup to my D5. Only i didn't find the sprocket, had to model my own.. Will do new drive wheels for my make over later this winter. With a new approach.. Thanks for a great video👍👍👍😉
Thanks Ernste, I love doing these small bruders even though space can be challenging they are always a very rewarding build, as ever thank you for viewing and supporting my channel with your great comments and feedback it’s much appreciated
@@116scalercconstructiontruc9 Well thanks, I do try to give constructive criticism 😉. I was thinking to print a hub to fit inside the original drive next time. And fit a few small screws maybe 5 around to help with slipping.. I like the blade lift, with the hidden mechanism. Great videos👍👍👍
Looking good bud, you’ll be pushing in no time. These are fun rigs. I enjoy seeing how everyone has there own vision on the build. Looks to be a quick dozer. On mine for the main blade arm I run a 645mg standard servo no linkage etc and on the blade I think I’m running 85mg and the two drive wheels tucked in box it’s running 625mg all servos metal gears. The hubs I slipped a inner drum inside the stock drive gear.
Hey Ron good to hear from you, i think the drive cogs need a bit of fettling or possibly replacing maybe back to the stock ones with some pins or bolts added, probably the only thing that bugs me with it is the little rocking motion when its tracking but i can live with it for now
Great, I did a very similar setup to my D5. Only i didn't find the sprocket, had to model my own.. Will do new drive wheels for my make over later this winter. With a new approach..
Thanks for a great video👍👍👍😉
Thanks Ernste, I love doing these small bruders even though space can be challenging they are always a very rewarding build, as ever thank you for viewing and supporting my channel with your great comments and feedback it’s much appreciated
@@116scalercconstructiontruc9
Well thanks, I do try to give constructive criticism 😉. I was thinking to print a hub to fit inside the original drive next time. And fit a few small screws maybe 5 around to help with slipping..
I like the blade lift, with the hidden mechanism.
Great videos👍👍👍
I have seen that drive method used on other builds looks quite a successful way of doing it let me know how it works out for you when you do it 👍
Looking good bud, you’ll be pushing in no time. These are fun rigs. I enjoy seeing how everyone has there own vision on the build. Looks to be a quick dozer. On mine for the main blade arm I run a 645mg standard servo no linkage etc and on the blade I think I’m running 85mg and the two drive wheels tucked in box it’s running 625mg all servos metal gears. The hubs I slipped a inner drum inside the stock drive gear.
Hey Ron good to hear from you, i think the drive cogs need a bit of fettling or possibly replacing maybe back to the stock ones with some pins or bolts added, probably the only thing that bugs me with it is the little rocking motion when its tracking but i can live with it for now
Good
servo name?
Hi i am away from home at the moment when i get back i will check them for you