When I turn left on my 300, ABS, ESP and power steering lights shows, and sometimes when driving in a straight line or parked some times this happens, if I turn off the car it won't start until I swap the fuel pump relay with any one from the fuse box at the front.
@@DallasAutoDiag I fixed it, it was just the bolt next to the front fuse box, I tightened it and the car worked just fine, and all the fault codes in the computer disappeared
Doing this also fixed the headlights issue I used to have, I installed the 450W LED, it used to turn off, then I removed them and put back the halogen bulbs which requires less power. Now I reinstalled the LEDs and they work fine.
I think I was off one revolution as well, I got the backup lines to now show it's straight when I put it in reverse. But my "Service Electronic Stability Control" light is still on. I don't show any codes with my cheap bluetooth code reader. How can I clear the message. I don't think my cruise control works until this gets cleared. Thanks. I have a 2015 Dodge Charger.
My Ford collision warning light is on my stability control light is on and my ABS light is on. My car can't go into cruise control because all of this stuff isn't working. What should I do, and can I fix it myself?
Hi,i have a 2023 dodge charger 8000 miles,today i got the servive electronic throttle control also service electronic stability control also acc/fcw service required the car start however it wont go foward nor reverse. Can you plz help
and mine turns on while im driveing no turning it to right or left will activate esc service indicator and when i turn off vehicle it goes away and turns back when i drive the vehicle
Hi man.. I have the same problem with my RAM 1500 .. does it fix using this procedure? (my tech did not fix this bug after 3 visit to technician center)
Useful information, I’m getting code c005122 on my 2020 charger. I purchased a theft vehicle and the shop started installing parts on it. I had it aligned and it seems to track straight but I had that msg and light on the dash. My lines when I revers are total opposite of my steering wheel. How can read the angle numbers without a computer like yours? I have a similar scanner but mine says I need some type of cable for 2018 and up
Received my cable and tried with mt xpax100 stool scanner but I don’t see an option to read the steering. I seen steering but all it does is clear codes and reset with no other options. I might need a different scanner
You are the master,excelent job,thanks for sharing it.
Thanks for the comment mago
Much needed info. I changed the multifunction switch on my challenger and was having the exact same problem thanks man!!
Glad that it helped
Are you talking about the wipers switch? Cuz i just replaced mines n it’s doing the same thing?
When I turn left on my 300, ABS, ESP and power steering lights shows, and sometimes when driving in a straight line or parked some times this happens, if I turn off the car it won't start until I swap the fuel pump relay with any one from the fuse box at the front.
This is weird. Take it to someone that knows whatthey are doing
@@DallasAutoDiag I fixed it, it was just the bolt next to the front fuse box, I tightened it and the car worked just fine, and all the fault codes in the computer disappeared
@MOHA that's a ground, I believe. Now, it makes sense what you were saying. Good job 👏
Doing this also fixed the headlights issue I used to have, I installed the 450W LED, it used to turn off, then I removed them and put back the halogen bulbs which requires less power. Now I reinstalled the LEDs and they work fine.
Hi, i purchased same scanner but not giving me not supposed. Do i need to get acces thru dealer?
Call autel support
I think I was off one revolution as well, I got the backup lines to now show it's straight when I put it in reverse. But my "Service Electronic Stability Control" light is still on. I don't show any codes with my cheap bluetooth code reader. How can I clear the message. I don't think my cruise control works until this gets cleared. Thanks. I have a 2015 Dodge Charger.
I think you need more advanced scanner
My Ford collision warning light is on my stability control light is on and my ABS light is on. My car can't go into cruise control because all of this stuff isn't working. What should I do, and can I fix it myself?
Did you ever find problem?
How do you get that screen? Mine is a metra screen
It wasn't me
Hi,i have a 2023 dodge charger 8000 miles,today i got the servive electronic throttle control also service electronic stability control also acc/fcw service required the car start however it wont go foward nor reverse. Can you plz help
Are you in Dallas TX?
Where are u located in Dallas I need this issue fixed in my 2015 challenger
My shop is in Kennedale
How much cost it?
@@Edgarzurdo10 call 2144903440
Were u located in dallas I need similar work done
Put the battery sensor comes on and still staying low something in the corner
I don't understand sorry
i had mine just turn on today in 18 durango sxt kinda freaked out so dont know what to do hope u can give me some pointers how to go bout this
and mine turns on while im driveing no turning it to right or left will activate esc service indicator and when i turn off vehicle it goes away and turns back when i drive the vehicle
Sounds like you have a different issue.
Sounds like a different issue than the one in the video
My lines are opposite of the steering wheel in either way. Any idea on which way to turn the clockspring
You can slowly move one direction and see if it's the correct one. If not, just turn it into the other direction.
Did it fix?
Repaced multifunction switch and it is doing same thing. But you still need computer to do this
Contact us on facebook
The rack and pinion steering rod shaft stick is Upside down
are you from iraq? can u do the same video with Arabic language please thank you
ناوي ان شاء الله اترجم كل الفديوات
How much would this kinda service cost?
What codes do you have?
Hi man.. I have the same problem with my RAM 1500 .. does it fix using this procedure? (my tech did not fix this bug after 3 visit to technician center)
Yes it fix as you see in the video
Good job
Thanks
We’re are u located brother I’m having same problem mines came on driving in highway cold weather. 2018 Chrysler 300
My does it in colder weather too! 32⬇️
Im in Dallas TX
Wow the Chrysler dealership tried to tell me I need a transmission
What was the issue with your car?
Mines on right now those always goes out on the 300 why is that ?
Useful information, I’m getting code c005122 on my 2020 charger. I purchased a theft vehicle and the shop started installing parts on it. I had it aligned and it seems to track straight but I had that msg and light on the dash. My lines when I revers are total opposite of my steering wheel. How can read the angle numbers without a computer like yours? I have a similar scanner but mine says I need some type of cable for 2018 and up
You need this
a.co/d/0ivQC7r
Ordered it, will be here Friday ..
I’ll let you know how it goes
Received my cable and tried with mt xpax100 stool scanner but I don’t see an option to read the steering. I seen steering but all it does is clear codes and reset with no other options. I might need a different scanner
@@angmunozable since you were able to access the steering module, now I think its a scanner limitations as you said.
The Same Shit happened to my 2015!
Hopefully the same shit in the video is gonna fix it.
😫 I just couldn't stand it no more, he won't get to the point