I had opportunity today to address one of our hire paslodes today, only because ive watched so many of your paslode service videos. Thanks for that, was a simple fix (one bolt to hold head unit on gun had loosened up enough to where it wouldnt shoot correctly, easy fixed).
Hey mate, love the tool vids. I have an 'im350' just with the different gas nozzle. Live down under. Had it sent in for full service but still taking forever to fire once the framer is engaged. We've named it I think I can. Any ideas on what might cause the delay between pulling the trigger and actually firing?
Thanks for the video. I have a really old Rockwell drill that my Dad used since the 60's do you know if you have parts old stock going back that long. The drill works just need the plastic back cap. Could send you pictures if you need. Going to also replace the chuck, that I should be able to do on my own.
No it dosent mater. Gas is gas. At worse it might cause the odd misfire. But that's it. But that is caused by the head of the gas not the gas itself. As long as it's in date it's good. If it dose misfire, you can always pop of the heads and swop the around with the genuine padlode one.
Do you still stand with your opinion that dewalt nailers are the best bang for buck for low/medium usage and paslode or hikoki for daily/intensive usage?
Yea they are one of the lowest prices options if you have dewalt batteries. But it will still cost just as much in the long run as they need parts replaced regularly as they wear out.
hi man I have a akita HR4013C and it had the fault when you plugged it in it would not start and would hit the fuse on it what is wrong with the machine and also how du you clean you're parts so that you don't ruin them
Hey, you treat people better and I know you give them Break and you do great work I don’t know how you can remember. We’re all in springs washers go what you do if I had anything broken and live close to you I would certainly carry my stuff to you, Tallahassee Fred.
Liked, subscribed and couldn't praise the content enough.
Welcome aboard!
Complete service tutorial for this gun with pro tips. Great video. Ty Dean
I had opportunity today to address one of our hire paslodes today, only because ive watched so many of your paslode service videos. Thanks for that, was a simple fix (one bolt to hold head unit on gun had loosened up enough to where it wouldnt shoot correctly, easy fixed).
Anyone else get the idea Dean could strip down, service and reassemble a Passlode nail gun blindfolded ?
I enjoyed this video I try to guess which part comes next thank you
Thanks Dean !!!! Nice one!
Cheers mate thanks for the video I enjoyed it cheers 🍾
Hey mate, love the tool vids. I have an 'im350' just with the different gas nozzle. Live down under. Had it sent in for full service but still taking forever to fire once the framer is engaged. We've named it I think I can. Any ideas on what might cause the delay between pulling the trigger and actually firing?
more than likely a faulty spart unit
Morning Dean.
Morning to you to. well afternoon here
Thanks for the video.
I have a really old Rockwell drill that my Dad used since the 60's do you know if you have parts old stock going back that long. The drill works just need the plastic back cap. Could send you pictures if you need.
Going to also replace the chuck, that I should be able to do on my own.
Dea-jab Dean 🇨🇮👍
9:45 Holy cow! That's a looooot of nails!! I wonder how many nailguns have been tested there.
A lot - I say get a new board and sell the old one as a modern art installation
I thought he was just nailing into a pebble dash wall
Dean,do you get trained by Paslode or did you figure all this out by yourself? Thanks
Hey dean. Great video once again. What is your thoughts on the cheaper gases over the paslode own brand? Is there anything that should be avoided
No it dosent mater. Gas is gas. At worse it might cause the odd misfire. But that's it. But that is caused by the head of the gas not the gas itself. As long as it's in date it's good. If it dose misfire, you can always pop of the heads and swop the around with the genuine padlode one.
@@deandohertygreaser very interesting. Great bit of info, thank you
Do you still stand with your opinion that dewalt nailers are the best bang for buck for low/medium usage and paslode or hikoki for daily/intensive usage?
Yea they are one of the lowest prices options if you have dewalt batteries. But it will still cost just as much in the long run as they need parts replaced regularly as they wear out.
Where do you need to oil on a paslode gun. I've an older IM 350 and she's not firing/misfiring
Wow you found the knife 4 guns in 😂
This man makes break/fix look easy, almost robotic in how he carries out repairs 💚☘️🇮🇪✊💪
👍👍
Boss did you manage to find your Stanley knife
Eventually, I'm my coat pocket the whole time 😅
When you were testing that last gun I saw smoke coming out on the right if I'm correct is that where it exits the Chamber of the gas explodes ?
Hello my nail gun the Firing pin keeps coming slack do l just super glue it back in or do l need a new piston ??
Dean, how old is the oldest Paslode nail gun you regularly service, just curious.
hi man I have a akita HR4013C and it had the fault when you plugged it in it would not start and would hit the fuse on it what is wrong with the machine and also how du you clean you're parts so that you don't ruin them
Hey, you treat people better and I know you give them Break and you do great work I don’t know how you can remember. We’re all in springs washers go what you do if I had anything broken and live close to you I would certainly carry my stuff to you, Tallahassee Fred.
How often should they be serviced dean ?
what liquid did you used for cleaned paslode parts of gun?
kerosene
Conas atá tú mo chara Dean ?
I just have a question what is the worst nail guns that you worked on
Hilti
How much do you charge to diagnosis a problem have my son interested in working on tools and started a college course for electronics.
We only charge 5euro but some places can charge up to 20 depending how long they spend on it
@@deandohertygreaser 5 Quid sounds fair but would need to be a time limit i would say. Thank you we love the content.
You must be able to do paslodes in your sleep dean !