Hello thank you for your Video, very useful, I have a question, I am trying to use the kit on my 2018 Raptor, the instructions are not clear,, can you please explain the wires color codes? Blue, Red, White, Black Thank you
For 2018 the wiring codes per Aux Switch are as follows: 2018 Wire Colors Aux 1 - Green/White - 15A Aux 2 - Brown/Blue - 15A Aux 3 - Gray/Yellow - 10A Aux 4 - Green/Yellow - 10A Aux 5 - Brown/White - 5A Aux 6 - Green/Orange - 5A So for each light that you want on AUX1 for example, connect the red wires from each light to that wire above. Black is ground. Hope that helps.
Yes you can wire them all to one switch I wired them separately so I could control each light. For one switch you just connect all the wires of one side to the one switch.
@@yoshitheraptor6834 i know switch 1 and 2 have the most amp-age. And 6 the lowest. Currently 3,4,5 is being used. I am planning to run all 6 lights on switch 1 or 2 and run a light bar on separate switch as well. Do you think this will be ok with all the power drawn?
I think you should be ok as long as your are within the max amperage rating. AUX1 - Green(solid)/Blue(stripe) - 15A AUX2 - Gray/Yellow - 15A AUX3 - Violet/Orange - 10A AUX4 - Brown/Blue - 10A AUX5 - Gray/Orange - 5A AUX6 - Yellow/Violet - 5A 2018 Wire Colors Aux 1 - Green/White - 15A Aux 2 - Brown/Blue - 15A Aux 3 - Gray/Yellow - 10A Aux 4 - Green/Yellow - 10A Aux 5 - Brown/White - 5A Aux 6 - Green/Orange - 5A
Hello thank you for your Video, very useful, I have a question, I am trying to use the kit on my 2018 Raptor, the instructions are not clear,, can you please explain the wires color codes? Blue, Red, White, Black
Thank you
For 2018 the wiring codes per Aux Switch are as follows:
2018 Wire Colors
Aux 1 - Green/White - 15A
Aux 2 - Brown/Blue - 15A
Aux 3 - Gray/Yellow - 10A
Aux 4 - Green/Yellow - 10A
Aux 5 - Brown/White - 5A
Aux 6 - Green/Orange - 5A
So for each light that you want on AUX1 for example, connect the red wires from each light to that wire above. Black is ground. Hope that helps.
How have the lights held up? Thanks
They are going strong very bright. No issues with water or condensation and we get lots of rain out here
@@yoshitheraptor6834 I really like mine. Really adds some extra lighting. Thanks for the video!
Are you able to wire all 3 lights to 1 switch instead of all separate?
Yes you can wire them all to one switch I wired them separately so I could control each light. For one switch you just connect all the wires of one side to the one switch.
@@yoshitheraptor6834 i know switch 1 and 2 have the most amp-age. And 6 the lowest.
Currently 3,4,5 is being used. I am planning to run all 6 lights on switch 1 or 2 and run a light bar on separate switch as well. Do you think this will be ok with all the power drawn?
I think you should be ok as long as your are within the max amperage rating.
AUX1 - Green(solid)/Blue(stripe) - 15A
AUX2 - Gray/Yellow - 15A
AUX3 - Violet/Orange - 10A
AUX4 - Brown/Blue - 10A
AUX5 - Gray/Orange - 5A
AUX6 - Yellow/Violet - 5A
2018 Wire Colors
Aux 1 - Green/White - 15A
Aux 2 - Brown/Blue - 15A
Aux 3 - Gray/Yellow - 10A
Aux 4 - Green/Yellow - 10A
Aux 5 - Brown/White - 5A
Aux 6 - Green/Orange - 5A
@@yoshitheraptor6834 15A is about 1800 watts right?
@@yoshitheraptor6834 thx for the info. did you have the amber back light? how were you able to wire all 6 DRL amber backlight into 1 wire?
Great video! 👍
you didnt even show the switches inside the truck!
Why would he ? If you have a raptor it’s nothing to see .. it’s just switches ..
Didn’t even show you mounting the light. Bad install video.