2016 2017 2018 Chevrolet Camaro Fender Removal install tips and guide

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ก.ย. 2024
  • Took this a while ago when I replaced the stock fenders with Anderson Composite Fenders. I was also replacing the front bumper with ikon motorsports zl1 front bumper so I did it all at one time. I will have a up close fitment video of the bump hood and fenders soon!
    You will need a 7mm 10mm and torx 30 bit to do this removal and install.

ความคิดเห็น • 12

  • @HyperHawkCamaro
    @HyperHawkCamaro  6 ปีที่แล้ว +4

    Found out you do not need to remove the front bumper to take off the fenders but honestly to get to the 2 side bolts I find it easier anyways. Correction the smaller bolts are 7mm I said everyting was 10mm you will need both 7mm and 10mm sockets. Any questions feel free to ask!

  • @Snead1k
    @Snead1k 11 หลายเดือนก่อน +1

    Perfect, straight to the point and very clean video quality! Thank you

  • @jeffbegay9771
    @jeffbegay9771 ปีที่แล้ว +3

    Yeah...I needed to remove my fender on the driverside, because some asshole hit my Camaro.. that and the front whole facial bumper..I'm piss! Good video, thanks

  • @senikah365
    @senikah365 8 หลายเดือนก่อน

    So how much does it cost to repair my right fender is kind of dented in and bottom of the bumper is dented as well how much both on the same side from hitting something ?

  • @febuaryairplane
    @febuaryairplane 11 หลายเดือนก่อน

    How do you remove that 10mm? The one hidden behind the cables the difficult one?

  • @zacharymessner6157
    @zacharymessner6157 ปีที่แล้ว

    Trying to do this on a ZL1 would anyone know the difference?

  • @dakotaparsell9867
    @dakotaparsell9867 6 ปีที่แล้ว +1

    Why did u remove the fenders? Also what was that RS box under the hood? Im pretty sure everyone wants to know everything about ur car. Lol

    • @HyperHawkCamaro
      @HyperHawkCamaro  6 ปีที่แล้ว +1

      installed anderson composites carbon fiber fenders.. I will do a full car walk through video might record it tomorrow.

    • @dakotaparsell9867
      @dakotaparsell9867 6 ปีที่แล้ว +1

      What do u think about overkills 80 mm throttle body? I still can't figure out what that (RS) lables peace is under the hood...

    • @HyperHawkCamaro
      @HyperHawkCamaro  6 ปีที่แล้ว

      @@dakotaparsell9867 sorry lol it's a fuse box cover by American car craft. Hit me up with your TB question on IG @hyperhawkcamaro

  • @danondaleske3912
    @danondaleske3912 7 หลายเดือนก่อน

    Useless video, if you aren't going to show doing the work , don't post.

    • @HyperHawkCamaro
      @HyperHawkCamaro  7 หลายเดือนก่อน

      Thank you for your opinion however its helped alot of people find some of the more hidden bolts etc.. Literally says install tips and guide.. Doesnt say " how to" or Step by Step" Alot of my video's are me doing something encountering something I struggled with and basically recording and reporting that out to the community.. I am not going to re-assemble to take it back apart for a video. I am sorry this was not up to your standards and that you were so dissapointed you had to leave a negative comment. I hope life brings you some better days.