Converted WF 7840 Into A Sublimation Printer
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Converted my Epson WF-7840 into a sublimation printer. Let's get right into it: Take you to step by step process, so follow along. These steps are for only Epson WF-7840 & WF-7820. Below is the conversion kit, I used. Not paid promotion or affiliate link for Dynamite Gorilla (shoutout to them).
WF-7840/7820 Sublimation Conversion Kit: tinyurl.com/fm...
The supplies I use for Sublimation are below. Also, do your own research for better deals $.$$. Links will take you to a new page (no promotions or paid commissions).
-Cosmo Ink (Sublimation Ink): cosmos-ink.com/
-812XL Refill Cartridges: tinyurl.com/uk...
-Heat Press: tinyurl.com/5m...
-Epson WF-7840: tinyurl.com/ha...
-Epson EcoTank 3760: tinyurl.com/52...
-Teflon Sheets: tinyurl.com/4v...
-A-Sub Sublimation Paper 8.5x11: tinyurl.com/2v...
-A-Sub Sublimation Paper 11x17: tinyurl.com/ws...
-Heat Transfer Tape: tinyurl.com/37...
-Natural Butcher Paper: tinyurl.com/yh...
#sublimation #graphicdesigner #businessowner - แนวปฏิบัติและการใช้ชีวิต
DO NOT UPDATE FIRMWARE‼️ After converting, please go to www.epson.com/support/ (type your printer name, then download "Recommend" print drivers. Refill Cartridges: tinyurl.com/ukb5j9vk
Thank you very much for taking your time to explain it to us I appreciate it. I have Epson WF 7820. One cartridge’s was empty I change it and it still says it is empty. ?? Do you have to change all of them at one time?? The color rubber seal I I put that back in do you have to put the clear rubber seal and also? How many times can you fill up the cartridges? Please reply thank you very much
@@teresahamlet7736 @Teresa Hamlet Hello. Once the chip is swap or bought from etsy, remove the clear rubber seal to fill the sub-ink (throw away clear seal), take the color rubber seal and replace where clear seal. Then you need to watch this video to download the "print drivers": th-cam.com/video/aLpdCW_yQkw/w-d-xo.html
@@diywithkenny8399 Hi I am looking auto reset chips for my epson wf7820, do you have on sale?
Sorry.. i have research that a few times, nothing yet. The claim still is chip shortages and possibly other politics (pandemic). Think once that is lifted, we should be getting that.
@@diywithkenny8399 I found this auto reset chips but for a wf7840, the seller doesn´t know if they will work with an wf7820, what´s your opinion? Do you think it will work on my wf 7820?
Nice tutorial Kenny tv. Keep up the great work.
Thanks Digi, appreciate the comment and again thanks for watching!
You are the only one that answers any comments, thank you for that and for the videos.
How much ink should I use if I’m using the chips that came with the printer? I heard they show empty really fast. Or can I continue to use them even though it will show empty? Yes I’m new to this, lol
Very much welcome & thank you as well! The big wait is the new software for microchips, so you will have to purchase new epson ink for the chips for now (unfortunetly), but can use cheaper versions like 812XL. There is a part 2 about the microchips if you have not watch.
You can refill sublimation ink anytime (so check for it manually). But be very careful removing refill cartridges. Recommend changing chips because dont want your printer software to mess up! Again we all waiting for new software/microchips lol. Below the link. Thank you.
th-cam.com/video/RpGKMmlkNh0/w-d-xo.html
Will the remanufactured cartridges to replace the chips?
@@kathysicuranza5999 Yes the 812XL chips will work. Can check part 2 video if you like, little more in depth about printer ink saying low, swapping new chips, taking out refill cartridges. Link:
th-cam.com/video/RpGKMmlkNh0/w-d-xo.html
@Kathy Sicuranza Adding also just make sure it says in thier description it works for WF 7840 or 7820 😎
Thank you! Don’t know how I missed that one, thought I watched all of your videos.
Outstanding
Thanks Larry 😎
I ain't even into sublimation yet, I use plastisol transfers service but I might start doing my own outputs with this kind of setup. Love how you help your viewers in the comments. That alone was worth the like & subscribe. Keep up the great content!
Appreciate the comment. Thank You.
Awesome content. Everything turned out great. Thanks again for the video YOUR A LIFESAVER!!🥰
Welcome glad it help .
My printer says to install the ink that came with printer. How do I fix this
Nice video. I have a 7840 that I am thinking about converting since they stopped selling the 7720's. Thank you for sharing.
Hello. Thank you for watching.
Thanks Kenny, it worked perfectly! I had one issue when inserting the ink cartridges. I didn't snap them in so I received an error. I removed the cartridges and then reinserted them ensuring I heard the click and it work! You are awesome! - J from Canada
Awesome to hear! Just manually check your sublimation inks, because the chips will read if it was normal Epson inks. If color fades or off (I have a video on calibrate everything); but do a print head clean. Can always convert back to normal inks anytime (again print head clean 2x or more). Any questions I am around 😎
@@diywithkenny8399 We have this printer. We purchased remanufactured ink and the green is a bit off. Sort of washed out looking. What would you recommend?
Hello sorry late reply, i would try a few "Print Head Cleans" (its on your printer maintenance area), then do the print out which is the 2nd step (its optional), then print out a small design or shrink it down to test it out (repeat if needed using same sublimation paper so wont waste more ink). Depending on your printing use, I would recommend that you do a "print head clean" weekly to keep your colors right. Treat the printer like you would your vehicle. Let me know this works!
Impressive, but can you still use the Sublimation inks for normal daily photocopy prints
Thank you for this video. You explained everything very well.
having hard time for printer to read cyan i get check mark but when close lid get error new chips please help
Ok:
Did you use any of the original ink before converting?
Also double check that the chip is facing correctly like the others, and not coming loose when putting in cartridge.
Be careful taking out and placing in cartridges, do not angle them.
@@diywithkenny8399 didn’t u any original ink
I also get error on screen no ink is shown on any cartridge until I take out the one ink it doesn’t recognize
@@williebrown9012 ok. Did you match the chips with the same colors? Meaning took Cyan chip off original cartridge and place on the cyan refill-cartridge? Same for the others?
Let me know the status. Will get back with you tomorrow, do some research on my ends.
Great tutorial but do you know how to revert it back to a regular printer. The ink cartridges and sublimation refills cost too much. Was hoping someone would have come up with a way to just buy the chips. I hate this printer.
Thanksssssss
Welcome anytime, any questions be free to ask!
Ok did I everything right the paper came out but now it’s saying that the paper is jammed but nothing is in there and this is a brand new printer
can it bechanged back to the regular printing
Yes. Can always put back regular ink at any time! When you do, just run a few head print cleans, use regular copying paper for the next step print, and the printer is back for regular prints.
Are the cartridges clear or black because they are showing black in the link
Ok they are suppose to be clear, thanks for pointing that out.
tinyurl.com/ukb5j9vk
Oh the link in pin in comments is good
Excuse spamming replies, the link showing black epson cartridges was to get more chips if needed
Which brand of refillable cartridges do I buy? I just got the wf7840
There multiple ways to get! Send some links point you in right direction. Hold on.
www.etsy.com/listing/987895305/
cosmos-ink.com/collections/sublimation-ink/products/cosmos-sublimation-ink-refills-cyan-magenta-yellow-black-for-epson-wf-7710-wf-7720-does-not-include-cartridges
check those links out! Refill Cartridge is 812XL & Cosmo Ink for sublimation. Can Google search WF 7840 sublimation conversion kits. But if you buy from the links below, can estimate $60. No commission pay, only helping.
K, I just got my cartridges you listed, "812XL" but how do these work? These have chips. Do I drain cartridge? These are full and look after market ink cartridges. Help, appreciated.
I don't understand. My current chip is telling printer that the cartridge is empty. So moving the chip to a new cartridge is still going to tell the printer it's empty. Do these printers keep going even if they think there is no ink?
I'm also reading comments about getting new chips, when available. At some point you will need new chips anyway?
Yes if your chip runs low and can see in the supply on printer, have to get a new chip even if you have ink in cartridge. They have not made the certain chip where we do not have to swap yet (why you hear chip shortage and that stuff).
what do I need to do if it doesn't recognize 1 cartridge? I took it out and put it back in.
Try removing all cartridges, turn off printer, unplug for 10 minutes, then turn on, place cartridges back in.
Thanks fam! Needed this
I'm having issues putting the chips on
Hello New in your Channel, where can i order the ink cartridges at?...you mention "802s" cartridge kit?
...also, I just bought an Epson wf 7840, at first I thought I had made a mistake cause of its monster size lol. You see, I make piñatas, and I needed a printer that could print the lasgest size, so I guess I could only find something that would print 13×19, that really ends up printing 11.5×18, or smaller,...bummer.☹
At this point what I eant to get is niice vivid or bright neon colors or like the children's front cover coloring books.
Thank you and Peace🙏
Hello. Here a link to Etsy points you in the right directipn, but please research: www.etsy.com/search?q=wf%207840%20chips
Wooo hooo!! I did it.
Lol 😂 it was easy.
Do you have to change the chip at every fill up ??
Hello & yes you do have to purchase new chips (no chip reset devices or infinite chips still). Recommend getting thr EcoTank 15000.. can print up to 13x19s, but please research.
Thank you soooooo much!!!!♡♡♡
Welcome! If you have any questions, feel free to ask away.
So I finally converted my 7840 and I have been using it but I can't find put how to print the 13×19 paper. I don't even see the option on the print app.
Hey Shanda.. you have to use the top paper tray, and you will sell a blue slider for paper size.. make sure use blue slider thing to secure paper before print. I use that for my 11x17s. 😎
Paper tray is looking on top of printer back of the scanner!
@@diywithkenny8399 I see where to put it but I don't have an option to print that size from the app or from my computer. Have you printed 13x19 before?
Kenny I found it! It's the A3+ option
@@phiwife oh i see what you were asking now.. lol i was thinking where to load😁
You sound just like Ice T. I love his voice!
As for turning this printer into a sub printer, I appreciate the effort but; it doesn’t even seem worth it. I don’t want to purchase and waste ink just for the chip. I sure wish someone could figure out how to bypass the ink level thingy on this printer.
Guess I’ll keep waiting...
Lol thanks. Firmware chips are not made or not in this country far as I know. When my current chips get low, will try some solutions I have dug up. But for now it is what it is 😅.
Oh yea.. i did remember you can convert any EcoTank easily by using sublimation ink, just have to figure out which printer.. just in case.
I’m hanging trouble with my printer the ink seems to be clogged but I did a nozzle fleck multiple times.
Thank you 😊
Thank You for watching. Any questions feel free to ask. Remember to download the "recommended print drivers" from www.epson.com/support (search printer). Never update Firmware, turn option off on printer.
how do you reset your cartridges when they are close to showing empty with page count?
You will have to purchase new chips tonreplace back on refill cartridges for now. No reset device or infinite chips not availible yet. Check Etsy for good prices
How long do the chips typically last?
Hello. It can vary for busy usage, normal usage, or every now and then (including design sizes). Eventually will have to run "print head cleans" to bring back colors to normal, that takes away chip life. For me I can refill the cartridge 2 to 3 times before the actual chip expiring for normal usage.
Can I convert a espon Ef 7830 print that’s been already used with the espon ink
You did mean WF 7830? Before I can say yes, check the original Epson ink cartridge see if it is 812. If it is yes you can convert it same way WF 7840 & 7820.
@@diywithkenny8399 how do I find out if it’s a 812
@@felix-blaz it the original epson ink cartridges that came with printer. Should have a number on there, you looking for T812 or 812. Hope that helps. Look at the cartridges.
@@diywithkenny8399 am I still able to convert a printer to sub if I’ve already use the original epson ink with the printer
@@felix-blaz Can try the current chips, But recommend you need to buy new set of 812 ink cartridges to use the chips onto the refill cartridges. (Because chips will say low ink sooner or later and have to repeat process)
Until new software for printer availible but that is later.
Did everything you did but it’s not printing out right, when I do the nozzle check it doesn’t show no colors but yellow, any idea how to fix
Ok. Did you hookup your WIFI and go to www.epson.com/support and find your printer, to download the "recommended" print drivers and all? IF not watch the beginning of this video, then fast forward to 9min 27secs. Let me know.
If you refill before it runs empty do you still need to replace chips?
Only when your "PRINTER" calling for ink cartridges to be changed, then new chips. You can refill anytime. Check my video below if you like, explains more on microchips.
th-cam.com/video/RpGKMmlkNh0/w-d-xo.html
Also you can purchase 812XL cartridges, to save some money. Recommend to change chips only when printer is saying "low ink". Do not wanna mess up the the software, until we get new chips that does not require change! Its coming just hold on lol.
Geesh. Ok. I hope they hurry up. Good thing is I have a smaller Epson that I will use for smaller projects. Thank you. I'll be back with more questions I'm sure. My 7840 is still on the box.
I ran off many prints, had to refill black once. So 2nd video I linked was approximately 3 weeks, that printing at least 11x14 inches designs. But it is your call and when you convert, just pause at each step. You got this 🙂
@@diywithkenny8399 I ended up getting rid of the 7820 because they aren't coming out with any firmware anytime soon. It has a lot more to do with the complexity of circumventing Epson's new firmware than the chip shortage that people are saying. That being said you have a great channel that is extremely well organized and informative!
PLEASE OPEN & READ: Need new chips, the best deal will be on Etsy! Get chips attached on refill cartridges only, Link: tinyurl.com/ukb5j9vk
After labor part (swap chips, fill ink, and rest) please watch this to set up print drivers on computer, after download fast forward to 9min 27secs for WF : th-cam.com/video/aLpdCW_yQkw/w-d-xo.html
th-cam.com/video/RpGKMmlkNh0/w-d-xo.html Check the link for more microchips info!
Will the bottom stick out a tad?
@@1988ccline Referring to applying the microchip on the refill cartridge? I have explained that part in the video. But if that, not the question, please explain more about what you're asking.
Yea I didnt catch it then... I seen where u said to push it in or take that part off to help it go in easier but didn't catch it it then laid flat or not
@@1988ccline It is ok, just be sure to shave bottom nub plastic part flush.. then the nub-plastic on left/righ/top will hold the chip, that when you press in. Angle the top of chip to fit it in helps. 🙂
I just watched it again and didn't catch it. Hopefully that isn't a sign about today lol
Ok, a friend said she shaved the bottom one off but then it kept throwing codes so I kind of was trying to see if it mattered or not, my chips are all being held in there good, but wasn't sure that tiny gap would hurt. Thank you
I've ordered the WF7820 is the set up for conversion the same?
Hello and yes it is. Just after the swapping out rhe refillable cartridges, make sure you download the print drivers from www.epson.com/support
So question?
Every time you have to refill ink you have to buy a new cartridge and new chips?
Yes fot this printer 7820/7840. No reset chip or infinite chips made yet.
sinchip trabaja excelente
aqui en Peru lo convertimos SINCHIPS
I can open and close the blue cover for install the ink cartridge? Help
Hello, one question, I already changed the cartridges, but my printer keeps saying that they are low and I can't print, what do I do? thank!
Have you download the print drivers from www.epson.com/support ? If not follow link and download, and DONT update FIRMWARE on printer. Let me know.
I already have the cartridges ready with the sub ink, just not sure what to do next, since i've already used it as a regular printer
You have to get a whole new printer
Mine is telling me maintenance error
hello. Were you using your printer for sublimation? Also did you update firmware on printer?
Is this a wide format printer?
Good morning I have the wf7840 and this is my second time changing the chips. Now the printer isn't recognizing the cartridge do anyone know how to fix this?
Hello. Have to ask few questions, how did you change the chips:
Did you but new refill cartridges with chips on them (like from etsy)?
Did you change the chips yourself, facing up correctly?
Did you update firmware on printer? NEVER UPDATE FIRMWARE!
Let me know see we can figure this out.
My printer will not recognize the black and cyan cartridges since I changed them
Kenny why buy Epson New Ink, than take Chips off and put on empty cartridge and fill them? Are you saving that much Money or What....... Help
This is just an alternative cheaper way to convert a printer for sublimation, most was counting on chip firmware or reset chip devices like the older workforces & other printers. I would go with Ecotanks, easier. Since pandemic, the chip shortage have effective all in its due industries, most likely the chips will be out sooner or later.
I want to purchase this printer and convert but I'm confuse about all the talk of microchips
WF 7820/7840 would be the cheapest option because of print sizes 11x17, 13x19. The firmware chips are not made yet that would cure the swap chips whenever running out.
Now another easier option that is good is EcoTank series, but if you want bigger print size the ET 15000 around $600 be overall best option no chips, just buy sublimation ink.
Hope that explains it.
Have to add.. when WF 7840 or 7820 chips says ink is low, then you would have to buy new set, but there an Etsy seller (link in description) sells refill cartridges with chips as set for $40 to $50 around there.. little more cheaper than buying real epson inks or 3rd parties to swap.
Sooo What happens if you take a cartridge out to refill? Will you have to get another set of $80 Epson cartridges? Ink goes SUPER fast when printing.
Hello. Depends on your way of usage, I do have about 3 parts explaining. You will fill up sublimation ink manually, that will go 1st before the chips. Yes you will have to get more chips because no firmware chips are made yet. Can always go EcoTank of your choice or purchase here (cheapest): -812XL Refill Cartridges: tinyurl.com/ukb5j9vk
Can you use the cartridges that comes with the printer instead of replacing them?
Not if you want to convert it for sublimation
My printer won't read the chips...
I was converting my printer to a sublimation printer and this is coming up I have converted the chips into the refillable cartridges installed into printer and this is what’s coming what I’m I doing wrong
It’s said not Recognizing ink cartridge
Hello. Did you ever recall updating your "FIRMWARE" on the printer? If you did then that may be the problem. Let me know.
Can we still covert it without using the empty cartilage
Not sure what are you asking there? You mean use original epson ink cartridge?
What happens when it is saying it don't reconize the chip. I reinstall it and it is still saying error.
Is there enough ink in the kit to fill the cartridges more than once?
100ml each bottle. That about standard.
@@diywithkenny8399 ty for your quick reply
Hi there. Do you have to change chip at every refill? I saw on Etsy, they sell the cartridges but you must change the chip at each refill.
Hello. Only have to change chips when printer warns you. Have to manually check and refill sublimation ink during those chips.
Can I use to print dtf??
Hello Mr. Kenny,
Hope all is well. I purchase the WF 7840 last week and the 802 refillable ink cartridges. I look at your video over 4 times step by step to make sure I'm doing it correctly. After replacing the chip off of the original cartridges onto the refillable cartridges, fill the cartridge with the hiipoo sublimation ink and once the WF-7840 printer stated to install the ink cartridges, I install all the ink cartridges the way you stated, and the printer would not recognize the cartridges. So, I remove the cartridges from the printer and then unplugged the printer the plugged the printer back in and install the refillable cartridges again. The printer still not recognizing the refillable cartridges.
Please :( help!!!!!!!
Thanks Maxine
I am having the same problem. 😢
get a chip resetter..
Kenny T.V. your viedo has been very helpful. My Epson 7840 will be her T the end of the week. I did go on etsy for the refillable cartridges with chips. However could you explain what I would need to do differently since the cartridges will have chips.
Thank you I would appreciate it.
Have a blessed day.😊
That's cool. This converting process takes about 40min more or less. Cosmo Ink is on Etsy, but do have own website.
Recommend thier sublimation ink, can buy kit that comes with surenges (to fill).
Everything for sublimation in this video description (not comments), and have links.
Please watch this soon after you fill and install your refill cartridges: th-cam.com/video/aLpdCW_yQkw/w-d-xo.html
But when you do get your printer and converting, if you get stuck, can always reach out here. 😎
Last thing, no need to do anything with the etsy refill cartridges but this, make sure the chips are facing up correctly by checking original epson cartridge chips, and the clear plug to fill ink can trash it, the color rubber seal will be placed there after filling & prime ink.
Doing some research, I see that they have cartridges with chips on them. Will those work?
Hello. Have to read the description, if it says "chip one time use".
Kenny I followed your steps but I keep getting a error stating maintenance error
Do you why am I getting this error and how can I fix it??
will these refillable work with wf 7830
I have added ink into the new cartridges and changed out the chip, but nothing will print. The ink is going into the maintenance box. Any suggestions on what I possibly did wrong??
1st connect your wifi If you haven't done this step, follow along and download recommemded drivers, then can fast forward to 9:47. You should have got the Epson page printed: th-cam.com/video/aLpdCW_yQkw/w-d-xo.html
Sorry bout late reply, any questions feel free to ask.
Happy holidays Kenny
Sorry if I'm writing you late but I have a question.....can you use a CISS kit chipless kit in my 7780 epson?
Happy holidays.. I am not sure about the kit, and may have to research more
@@diywithkenny8399 good morning 🙏 ok will you let mr know, I saw it on gorilla utube
ok .. hmmm. Maybe it is out? Or he modified it to work? Interesting
@@diywithkenny8399 it's dynamic gorilla, so in his description what is a chipless activation key
Oh and I meant to say can you let me know when you research this lol...I think his video was a year ago...but this will be great instead of keep purchasing cartridges
I figured I turn the machine off an refill the sublimation ink then turn it back on is that possible 😏
will look into it.. because anything for WF 7840/7820 chipless anything not here in the u.s.a. yet
Hi, I followed all your step and my pages still print blank
Hello. Did you download the recommended drivers from www.epson.com/support (have to find your printer, then download).
Also let me know how it goes.
I bought the 7840 last night and I’m having trouble finding a video…can I use this printer for regular heat transfer paper??? Thanks a lot a great vid btw
Hello. Yes you can and recommend to use regular jet-ink on heat transfer paper.
Thanks man I’ve been hesitant to open it up. I really appreciate it 🙏🏼
Welcome. Feel free to ask anytime. Can always conver to sublimation and back to normal
Sorry to bother you on the weekend but I’m having some issues. So I have my printer connected and everything is running smooth. But i having a problem printing plain heat transfer paper at 11x17. I tried the settings on both my hp laptop and Epson 7840 printer. Is there a setting I’m missing? I get a errors that say paper sz doesn’t match
…your print setting
So I have a chip it’s a bit slanted I shaved off the bottom as much as I can but one of the sides isn’t completely holding the chip but it’s in place it doesn’t even fall out will the printer still read it? I’m getting the carts ready for when my printer arrives
Hello. Just have to try. Whenever placing the refill cartridges, try to keep them straight and also when taking out. If chip falls off, just try to angle chip to place it back. Angle in to the top part and push it in. Just take your time. 😎
Hello i came across your channel and i am looking in to getting in to printing shirts and have a few questions about converting a printer i think you are very knowledgeable at this and would love to talk with u about it
Will I have to reset my printer to set it up as sublimation printer? when I first got it, I started using it as a regular printer. It's the WF-7820
Nope. You may have to setup a preset preference only for sublimation, that way will not have to worry about mirror image, also size paper, and color setup I do video for that too.
Question I’m converting my printer I used regular ink in
Do I need to do a heavy cleaning of the heads?
No you dont have to do heavy cleaning. I would print a few regular pdf's of any kind on regular paper. Then the print-head clean, the sublimation ink will smear then you will know.
@@diywithkenny8399 thanks I’m up and running I just ran a few pages I had two colors of regular ink already out so it didn’t take much to clean out the regular ink
@@Llcreation1 Thats good. Now if your printing designs do fade (not looking right) OR printer sits for a while, just run a few print head cleans. I do mines weekly.
Can I buy the converted ink cartridges from you? I tried it and my printer is not working
soi take the chip off the inks that came with my 7840 printer?
Yes. You can do it that way, and place them onto the refillable cartridges, or you can purchase the refill cartridges with chips on them from Etsy, can send the link.
www.etsy.com/listing/1007470036/four-pk-epson-812xl-empty-with-chips?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=Epson+812xl+Empty+with+chips&ref=sr_gallery-1-1&organic_search_click=1&bes=1
Whatever will work best for you. Feel free to ask any more questions you may have.
Hello. This is probably a dumb question. But I bought a 7840 printer used it with it original and now its empty Can I still convert it over to sublimation. My kids place the ink in thinking that they were helping me set it up. But I wanted it to be used only for sublimating. Can it be saved or do I need to purchase another one
Hello & no question a dumb question over here; This link is best bet on refillable carttidges with chips: 812XL Refill Cartridges: tinyurl.com/ukb5j9vk
Just pause at each step, after the labor part is done, fast forward this video to 9min 27seconds for best colors and adding a preset: th-cam.com/video/aLpdCW_yQkw/w-d-xo.html
Feel free to ask any questions at any time, I will respond 😎
Omg. That was a quick response You are Definitely my favorite. So I will just watch your videos a few times and take notes so I don't mess up. Thank you so much. I really appreciate you❤😍
No worries & thanks 😎
When replacing the chips. Can it be any chips from any epson, or does it have to be wf 7840 cartridge?
Make sure those chips are "Epson T812" ink cartriges. It has to be WF 7840/WF 7820
@@diywithkenny8399 I have those my black ink will not connect
@@myvisionitm78 it could be the chip getting loose when putting in the cartridge; double check; and place cartridge in as even, not to angle it in, before pushing to click it. Also make sure the chip is facing correctly. Hope that helps.
@@myvisionitm78 also did you shave off that bottom plastic part for the black ink cartridge? Go to 2 minute marker into video.
@@diywithkenny8399 I did, I know I have 3 of the chips is 7840 that came with the printer and the other one is 812 I'm sure that's what I did so I'm guessing all chips have to be the same number of the replacement chip
What are the pros of converting your printer?
Becoming a crafter for fun, business, or both; that you can print designs and place them on many different products. Have to ask yourself this would be something I would like to do.
Hey what’s up brother , I followed your instructions to a T… so the ink and everything is working perfectly …. However I’m having a issue with the printer not recognizing the Dtf film sheets size A3 , I’m trying to do it through the rear trey . What is the hack to get the printer to take the Dtf film with this exact printer … thanks for your help if you get a chance
I live in Canada and was wondering where I can buy the cartridges?
There a link in my pin comment, but I have ask the seller myself if they ship to Canada (Etsy seller). Just waiting for a response. Will see if there is more, so check back here later this evening.
"conversion kit For epson wf7820 wf7840 4pk Epson 812 812xl single use chip". 👈Information for you on your side to look for.
@@diywithkenny8399 thank you. I'm having a hard time finding a supplier. Hopefully this will help! Thanks so much!
Welcome. I have tried ebay, and the sellers only work with usa. But check out the link so you can see the pictures of the cartridges. If I come across anything will let you know by end of the day here. 😎
Etsy seller link in my pin comment can, BUT says crazy exspensive. Will search some more. 😎
Open up the full pin comment for all the details. Any questions just drop em. You all got this 😎
Hey Kenny, I was researching tips on how to resolve issue with printer not recognizing cartridges and just read a comment from you saying not to update firmware. and I remembered that I didn't have that issue before the update. Please tell me how I can resolve that issue.
Sorry late reply, where did you buy the chips from?
@@diywithkenny8399 From PaperBryanCompany
Hmmmn. Try this: Remove the chip-cartridges, then unplug printer for 30 minutes. Replug and replace cartridges.
@@diywithkenny8399 Ok, I'll try to remove for 30 mins, only did it for like 5 mins
@@sheilacleave8344 Did it work?
Do you have to change the chip at every fill up ??
Hi! I currently have the one time use chips installed on my 7840. When I go to change out the chips, is it possible to use the original chips that came with the printer and place them on the cartridges?
Yes you can always convert back to original.
What is the largest size this printer will print? Im looking for one to print up to a 13x19 paper
Hello. For 13x19 the WF 7840/7820 (cheapest converting $300 more or less), Ecotank 15000 also (estimated $600 more or less) Printers. Price difference, but ET easier converting FYI. These are printer prices only. Hope I answered your question.
Hey anyone having trouble, dont be afraid to comment, you can check my About section and hit me on twitter
Any chance you can unfill the original cartridges that came with the printer and put sublimation ink in those cartridges instead of the ones shown in this video? If not any chance you could link where to buy the unfilled cartridges for the wf7840?
Hello. Not sure for these WF 7820/7840. But decent deals on Etsy: www.etsy.com/search?q=chips%20for%20epson%207840&ref=auto-1&as_prefix=chips%20for%20
Hey Kenny love your vidoes - I have a question. So I have this brand new epson wf 7840. I have done and followed the steps, changed the chips myself from the original cartridge and replaced the to the refil cartridge - but for about 4 days now it’s keep saying the same thing no matter what I do” cannot recognize cartridge” Although I haven’t downloaded any software from Eason website
What should I do?
Hi Kenny, my printer is saying that some of the ink cartridges are low or empty. I've taken them out and they are still full. I've only printed a few times so I'm not sure why it's showing this. Can you assist me? Thx
It is the chip.. good that you are checking manually, but be prepare to swap chips soon. Can buy them decent price and not the whole refil-cartridge (on Etsy search wf 7840 or 7820 chips).
@@diywithkenny8399 Wow! You are on point with responding and it's always the "RIGHT" answer. Thank you from Canada!
Also NEVER UPDATE FIRMWARE on printer.. i know they will have the chips made so no more swapping for this printer sooner or later..any further questions feel free to ask any time.
Hi Kenny, We refilled the ink on the converted chip cartridges for the first time. Getting a "Ink level low" still. Do we have to buy new chips after refilling before using? Thank you in advance!
Yes unfortunetly.. still waiting on the i finite chips or reset tool.
hey Kenny, looking for some assistance here. I followed your steps but now that I am done I get an error.
“Initial cartridge detected. Printer already initialized.”
Are we using the chips that came with the printer on the new refillable carts? Or do I need to buy replacement printer cartridges with chips and use the new chips on my refillable carts?
Hello. Did you download the recommended drivers from www.epson.com/support? Can use the chips off original cartridges or buy them out there (Etsy, Ebay, other places).
Can this process be used with the epson expression hd xp?
If it is the XP-15000 ecotank then yes! The expression hd have no conversion kit (yet).
@@diywithkenny8399 first of all THANK YOU FOR RESPONDING!! the box says expressions photo hd xp 15000?
Any Epson Ecotank are good, if you want bigger prints ET-15000 & ET-8550. WorkForce requires using chips and aftermarket refill-cartridges. If you could find wf-7710 or 7720 they print big and have reusable chips, newer ones like wf-7840/7820 the chip reset or reusable chips not made due to plandemic as of yet. Hope that helps explaining.
Greatly appreciated
Welcome.. feel free to ask anytime.
can i convert my 7840 if i have used the regular ink? and what kind of paper to you print on that turned out awesome
Did it work?
Not sure if you know of a good one but do you have a recommendation for sublimation ink for a wf7310?
I use Cosmo Ink.
I have an Epson Ed 7840 setup with regular ink I originally purchased for sublimation but changed my mind and used a 7210 for sublimation now that my 7210 has a clog I’m considering converting my 7840 do I use clean out regular ink then switch cartridges out and add chips or is there a programming step ?
Did you end up converting 7840?
Hey Kenny,
I already used my 7820 a couple of times with regular ink.
Can I still convert it to Sublimation??
Did it work?
Hello Kenny I had another question when switching to a different brand of ink when it runs out, would I have to buy new refillable cartridges or would I be able to use the same one?
Hello. Can use the same cartridge with any inks 😎
How much ink you use or how much the ink cost you for that print?
I have purchase my ink from Cosmo Ink. Depending on your design prints ( Larger designs for me 11x17 & Regular 8x11) I manually refilled approximately 3 to 5 times or more before chip ran out. Basically have to check your cartridges manually and not depend on chip for ink. It all varies from what brand of sublimation inks, how detailed & size of designs. Hope that made some sense.
@@diywithkenny8399 Yea thanks bro. I have the Epson WF 7820 and Cosmo ink. Wanted to get an idea or feel on how to charge for ink👍🏾
Welcome. There is some sort of math & estimate number of prints, but I personally cannot go by that. Factors my ends is weekly print head cleans (use ink but keep colors vibrant & printer running smooth), designs of course, and print mostly 11x17s. You got this 😎
@@diywithkenny8399 Salute👍🏾
He y there can I ask if is it true that you need to replace the sub ink cartridges each time you run out of ink? I can't see that being good for the chips to keep moving them around that much. Let me know your thoughts. I really need a wide print printer for my business but before I invest I want to ensure it's a good one. I was also looking at 1500 however I am hearing it does not print bold colors. Do you have an opinion on that as well? Thank you in advance for your help!!!!
Better off getting the ET-15000. The WF 7840 is good, but no infinite chip made as we know it, replace chips due to software, then worried about firmware (because IF you update firmware, then no more 3rd party chips would work).
@@diywithkenny8399 Thanks again, that is what I was thinking however I was then reading that the color quality was not the best on the prints. Have you found that to be true?
@@yournumberonesie5148 No the ET 15000 just as good. I only use Cosmo Ink. Also use some presets for my colors too. After awhile of printing, I do weekly print head cleans (about 2x or more) to keep the printer colors working (like a vehicle oil change).
@@diywithkenny8399 Thank you, thanks so much you helped me out a ton!!!!!!!!!!
@@yournumberonesie5148 Welcome, but any printer after so many prints; you will see colors error, so the print head cleans will bring them back to speed. Once that occurs, run 2x or more print head cleans weekly (even if it sits because sublimation ink is different from regular inks). Trust me on this
Hello, I loved your video I have a question do you know what is the biggest size paper you can print on? I was looking at getting a different epson before I watched your video. Trying to see if I can purchase this one because it’s cheaper.
Thanks in advance
Hello, WF 7840 can go 13x19" paper size maxed. Thank you for watching.
Add also, cannot beat the pricing. But draw back is no firmware chips yet. So will have to swap out the microchips and can use cheaper epson ink 812XL get chips. Not to mess up the software when WF saying low ink. Appreciate again the comment.
@@diywithkenny8399 thanks for you very quick response. I already have a sawgrass 400 I bought a few years but it doesn’t print 13x19 and the newer one sawgrass 1000 is over a thousand. I was looking at the epson et 16600 I can’t them barely and the ones I find is very high. I need the 13x19 print area now.
Thanks again for your response. You are a good teacher and keep making great videos!
@@LilCari Welcome any time, this printer a monster, Just to confirm your answer 13x19" , link straight from Epson epson.com/For-Work/Printers/Inkjet/WorkForce-Pro-WF-7840-Wireless-Wide-format-All-in-One-Printer/p/C11CH67201#:~:text=Built%20from%20the%20ground%20up,%2C%20500%2Dsheet%20paper%20capacity.
What's up Kenny? Really get a lot from your Videos. I have a question, can I refill the cartridge at least one time without changing the chip?
Hey! You will have to manually check your cartridges, take out carefully and refill as needed.. the sublimation ink will go faster than normal ink. Make sure you do print head cleanings too!
@@diywithkenny8399 in response to your message here Kenny, how often do you need to do print head cleanings? After refilling every time? Thank you!
Just wounding can I print 13x19?
yes you can, paper tray on top. So may have to create another preset option where you adjusted the colors
Wait.. the setting for 13x19 will be paper tray.
A3 is that setting for 13x19
Got it👍 thanks again.💕
@@denisej.527 Anytime
quick question I'm thinking of getting this one however it has been refurbished by Epson, is there any extra steps I need to take when converting it or should it just be the same since it's like new?
Hello. Did you get the refurbished printer yet? If not I would recommend getting new or EcoTank 15000 (prints 13x19 and no chips)