INSTALLING A SOLAR Panel from AMAZON on my BOAT - SMALL BOAT PROJECT Ep.3. -

แชร์
ฝัง
  • เผยแพร่เมื่อ 3 ก.ค. 2024
  • 20w Solar Panel from Amazon including all connections and equipment required to my 22 year old 16ft Warrior 165 Boat.
    I'm not a marine electrician, there are many ways to do this, and I've chosen this way. Cheers!
    20W solar panel kit
    amzn.to/3LzhNcw
    Solder connectors
    amzn.to/3u2OZmV
    Soldering iron
    amzn.to/3qZ8NFQ
    Heat Gun
    amzn.to/3LzWoQz
    In-line fuse kit
    amzn.to/3uJo4LO
    8AWG marine tinned copper wire
    amzn.to/3LEcGYw
    #SolarPanel #SmallBoat #FromAmazon
    Chapters
    00:00 - Intro
    00:39 - Solar Panel Kit and Equipment
    01:55 - Installing the Solar Panel Kit from Amazon
    08:15 - Wiring Complete
    09:05 - Whats Next for the Boat
  • บันเทิง

ความคิดเห็น • 59

  • @AirbornePirates
    @AirbornePirates  2 ปีที่แล้ว +7

    After the video, I siliconed all the holes and put the gromets in, I also finished the heat shrinking. I worked out voltage drop etc using a chart from google, I'll explain more on the next video when I install a new fuse and switch panel. Thanks for viewing, remember I'm not a marine electrician, there are many ways and I opted for safety with slightly oversized wiring, calculated with current over distance to ensure it all works safely :)

  • @Freebird57
    @Freebird57 ปีที่แล้ว +5

    Hi I have just found your channel and I am loving the boating bits, I come from the north of England I live in Wallsend but was born in North Shields and old fishing town, about 30 years ago I had a 16 foot fishing coble and me and a mate went fishing along the coast out of the Tyne is was great but due to bad health I had to sell up. The only thing I see in this vid that got my beedy eye was the fact you didn't silicone the through holes in the roof for the panel, I saw wood coming out so you must use marine grade silicone and pull the wire through and seal the hole or water will get in and rot the wood in the roof and it will be a pain to fix. Keep up the vids I look forward to seeing more, Paul from Wallsend ;-)

  • @davidjbiscoe957
    @davidjbiscoe957 2 ปีที่แล้ว +3

    Looking forward to seeing Charlie Bouy get on the water

  • @Fantic156
    @Fantic156 2 ปีที่แล้ว +5

    Nice one. I'd add a couple of Spot and flood lights. Small floods one pointing forwards, one pointing back, and a movable spotlight each side on the roof, maybe removable on a 'springy' cord for moving around a bit. ;) Very handy for searches at night ...

    • @AirbornePirates
      @AirbornePirates  2 ปีที่แล้ว

      Thanks bud I’ve been looking at lighting a lot 👍

  • @Ryan-vs2em
    @Ryan-vs2em 2 ปีที่แล้ว +3

    Nice vid. Tinned copper wiring is a must on a boat, due to moisture and vibration like you said. I'm a sparky btw, keep up the excellent work. looking forward to the fuse switch rewire

  • @Timesend
    @Timesend 2 ปีที่แล้ว +1

    It’s cool to see the the progress from start to finish

  • @marc7uk244
    @marc7uk244 2 ปีที่แล้ว +1

    Can’t wait to see the end result 👍

  • @branchsnapper2228
    @branchsnapper2228 ปีที่แล้ว +1

    Excellent job. Be doing this on my van soon. Cheers

  • @chrismccartney8668
    @chrismccartney8668 ปีที่แล้ว +1

    Good clear Video

  • @jpw1812
    @jpw1812 2 ปีที่แล้ว +1

    She’s looking good 👍🏻👌🏼

  • @lewisgame459
    @lewisgame459 2 ปีที่แล้ว +1

    Looking good 👍

  • @Jako-fh8zg
    @Jako-fh8zg 2 ปีที่แล้ว +1

    Great video, nice bit of equipment. Each job done is one step closer to the water and a great learning experience - eagerly awaiting the next instalment 👍👍

  • @chrismcbrias8577
    @chrismcbrias8577 2 ปีที่แล้ว +1

    Nice mate

  • @fredflintstone1
    @fredflintstone1 2 ปีที่แล้ว +1

    Nice video I think some silicon around the holes as you mount the solar panel would have been a good idea? 🙂

  • @kevinmee3501
    @kevinmee3501 2 ปีที่แล้ว +1

    When you set off in you're boat looking for sharks, will you use a deckhand to help film, chum, etc or go solo .

  • @davidjbiscoe957
    @davidjbiscoe957 2 ปีที่แล้ว +3

    I thought you'd use silicone in the drill holes to prevent water ingress

    • @AirbornePirates
      @AirbornePirates  2 ปีที่แล้ว +1

      I put some of that on after 👍

    • @davidjbiscoe957
      @davidjbiscoe957 2 ปีที่แล้ว

      @@AirbornePirates I posted before watching the entire video haha. I see you said you had rubber grommets. Looking really good.

    • @georgewashington7444
      @georgewashington7444 ปีที่แล้ว +1

      Never use silicone on boats! It never comes off short of grinding out and it quickly fails.
      Overdrill holes fill with epoxy to seal and use butyl tape.

  • @Alkihauler
    @Alkihauler หลายเดือนก่อน

    Thanks for the video. I have a question for you, I have a boat with an onboard battery charger. How do I implement a solar charger with the onboard charger? Do I still have to have a regulator, and on the outgoing side of the Regulator does it need to have 120 V plug that plugs into my onboard charger? Thanks in advance for your time.

  • @user-rp3vv3md1n
    @user-rp3vv3md1n 7 หลายเดือนก่อน +1

    Recently found your channel and it’s great! I’ve just purchased the same solar panel kit for my own small boat and was wondering how you were able to fasten it to the roof of the boat when you don’t have access to the head of the bolt when you’re tightening the nut from inside the cabin? Cheers!

    • @AirbornePirates
      @AirbornePirates  7 หลายเดือนก่อน

      Hi bud yes, it was a little tricky, longer bolts pulled through and tightened the nuts from inside the cabin, and lots of silicon 🙂

  • @Rob-ow3bx
    @Rob-ow3bx 11 หลายเดือนก่อน

    Do you have to turn off the charge controller when you start up your boat?

  • @PegZ799
    @PegZ799 6 หลายเดือนก่อน

    Hi, at 3:58, using the heat solder connector, did you pull one wire all the way through and give the wires a twist together before pulling the connector back over the wires? I've read that this gives the wires a better connection, also states this in some of the boxes that the connectors come in.

    • @AirbornePirates
      @AirbornePirates  6 หลายเดือนก่อน +1

      Hi there, I didn’t but I should have! When I rewired the entire boat I did this method 👍 still going strong 2 years on

  • @AirbornePirates
    @AirbornePirates  2 ปีที่แล้ว +4

    What else should I do to the boat?? 😬

    • @chrismcbrias8577
      @chrismcbrias8577 2 ปีที่แล้ว +2

      Can't wait until you are out and about on your boat mate deffo As a keen fisherman I have no doubt that we have Great White sharks visiting our coast there is absolutely no reason why they wouldn't Maybe they are just passing through but I think they are here not in great numbers but but they are here I hope you are the man to prove that they are here Good luck and keep the videos comming thanks

    • @darrenhale6320
      @darrenhale6320 2 ปีที่แล้ว +1

      Seal the screw holes properly , connect red cable to red cable so if you sell it or something happens there is less confusion , account for voltage drop on a 20w solar with all that thick cable , usually enjoy your videos but I only lasted a couple of minutes before switching off

    • @AirbornePirates
      @AirbornePirates  2 ปีที่แล้ว +1

      @@darrenhale6320 voltage drop worked out with a chart prior to wiring. screw holes sealed properly with gromits and sealant after install.

    • @Ryan-vs2em
      @Ryan-vs2em 2 ปีที่แล้ว +1

      @@darrenhale6320 I am an electrician and the voltage drop would be virtually non existent in a small run like tht. good video.

    • @Ryan-vs2em
      @Ryan-vs2em 2 ปีที่แล้ว +1

      LED search lights would be good for night fishing.

  • @fishingnorthwales976
    @fishingnorthwales976 ปีที่แล้ว +1

    Can you leave the solar panel on when engine is running? I know with the small solar trickle chargers if you do the power from the engine can blow the fuse does the controller stop this.

    • @AirbornePirates
      @AirbornePirates  ปีที่แล้ว +1

      Sure can, it’s got a controller which stops any issues I never disconnect

  • @Alton-x
    @Alton-x ปีที่แล้ว +1

    Hi, im looking at investing in one of these, I have a small 16ft boat with an inboard 2cyl diesel engine running a single battery the Alternator is a 35amp unit, if I install the solar panel to keep battery topped up for bilge pumps whilst on a mooring would the alternators current when the engine is running damage the controller supplied with the solar panel? Or would i have to isolate the controller when the engine is running?
    Thanks

    • @AirbornePirates
      @AirbornePirates  ปีที่แล้ว +1

      It’s absolutely fine as the controller is inbetween. Not had any issues with mine 👌

  • @pieterwoudenberg8733
    @pieterwoudenberg8733 ปีที่แล้ว

    Like the vids bud. Where can I find the links for the bits you buy off Amazon?

  • @robertpaterson7311
    @robertpaterson7311 ปีที่แล้ว +1

    Thanks for the video. Does your solar charge both batteries or can it only charge one ? If it can charge two batteries have you shown this in a video ? Appreciate your help. Thanks Bob

    • @AirbornePirates
      @AirbornePirates  ปีที่แล้ว +1

      Hi Bob, I currently only have one battery, I would get another charger for a second battery I think as it’s only 20W

    • @robertpaterson7311
      @robertpaterson7311 ปีที่แล้ว

      @@AirbornePirates OK thanks for your reply. Hope the boat is going well and doing everything you wanted.

    • @robertpaterson7311
      @robertpaterson7311 ปีที่แล้ว

      @@AirbornePirates Appreciate your reply. Many thanks

  • @stewartbarber6734
    @stewartbarber6734 2 ปีที่แล้ว

    Where did u get security camera from or have u not fitted one cheers

    • @AirbornePirates
      @AirbornePirates  2 ปีที่แล้ว

      I did, it’s from amazon, a 4G WiFi one powered by 12v to 240v converter

  • @wittywoo9559
    @wittywoo9559 7 หลายเดือนก่อน

    Hey .. im new to the channel , great content btw ...just wondering is the solar doing a back up battery .. or connected to the orignal battery just for extra juice ..??

    • @AirbornePirates
      @AirbornePirates  7 หลายเดือนก่อน

      I’ve setup two now, (you can see on a later video) one for each battery

  • @Nunn_the_wiser
    @Nunn_the_wiser 5 หลายเดือนก่อน

    I've bought the same solar panel. How on earth did you fix it to the boat roof? I've got 4 holes but no way to get to the bolts under the panel.

    • @AirbornePirates
      @AirbornePirates  5 หลายเดือนก่อน

      Drilled holes in roof of boat, Bolt and nuts and silicon to connect 👍 fiddly but worked

    • @Nunn_the_wiser
      @Nunn_the_wiser 5 หลายเดือนก่อน

      @@AirbornePirates Thanks for your reply. Once one bolt is in, there is no way to get to the others. I have decided to go with brackets to make it slightly easier.

  • @garyjowsey155
    @garyjowsey155 ปีที่แล้ว

    Can you link your other vids .cheers.

  • @nigelcooper4285
    @nigelcooper4285 3 หลายเดือนก่อน

    Gash…

  • @trevormcalister8823
    @trevormcalister8823 ปีที่แล้ว

    Are you an ex matlow