ฝัง
- เผยแพร่เมื่อ 20 ส.ค. 2024
- Our tech general, Steve walks us through how to set up serial control to a joystick with the BZBGEAR cameras to get you up and running.
Products
BZBGEAR BG-VPTZ-HSU3 - bzbgear.com/pr...
BZBGEAR BG-4KPTZ-12XUHP - bzbgear.com/pr...
BZBGEAR BG-CJ-RS - bzbgear.com/pr...
_________________________________________________________________
Subscribe to BZB TV: goo.gl/zmHy1t
Most Recent Upload: goo.gl/AYyb84
Most Popular Upload: goo.gl/4UTPCU
Channel Page Link: goo.gl/CEzL2s
_________________________________________________________________
Online Store: bzbgear.com/
Twitter: bz...
Facebook: / bzbgear
Instagram: / bzbgear
LinkedIN: / bzbgear
Pinterest: / bzbgear
Learning Hub: bzbgear.com/bz...
Thanks for this informative video!
Glad it was helpful!
I have three cameras with a single rs-232 connection and a controller. In the video, you used an in/out dongle. Can you tell me where to get this? I've search with no luck.
the cable you used to connect from the joystick to the 1st camera is different to the cable used to extend to the 2nd camera. What is the name of the cable from the 1st camera to the 2nd camera?
Pregunta crucial, soy nuevo en esto.
¿Se puede hacer toda esta configuración sin conexión? Es decir, ¿no necesito estar conectado a una red de Internet y solo hacerlo dentro de una red local usando nada más que el switch POE?
Quiero hacer esta configuración en zonas rurales donde no hay conexión a internet, ni wifi ni red Ethernet, pero me interesa utilizar el protocolo POE por su practicidad.
¿Es eso posible? El video solo se grabaría localmente utilizando un dispositivo de captura como OBS.
Otra pregunta, ¿puedo usar un controlador y usar diferentes cámaras PTZ de diferentes marcas o necesito tener las cámaras de la misma marca que el controlador?
Muchas gracias, espero que me puedas ayudar.
Can i connect the cameras not in daisy chain as they are in different directions
Of course! If you're using BZBGEAR cameras, call us and we'll walk you through.
I bought what I thought was a joystick and camera similar to what you show. The joystick i received only has RS485 block, no 232. The camera I have only has RS232 (mini 8) connector. I tried a RS485 to RS232 converter, but no luck. Both the camera and joystick claim they support VISCA, Pelco B & D. Any ideas on how to convert or should i return the joystick?
hello, I have connected 2 PTZ cameras using 485 connection. I can controller both cameras with the controller but when I which to camera 2 I get no video, Do I need to run a video line to the monitor from camera 2? I am using OBS on my computer.
Hi Don, are you using BZBGEAR cameras and can you please walk us through your connections?
How do you change the speed for each set or pattern?
With joystick controllers, you can usually set the speed manually on the unit itself.
Hi! I am planing to get a joystick with rs485 connector only, and my ptz camera has rs485 connector too... Can i connect those two by using 2wire rs485? Thank you!
Hi Jan, yes, you can conect using a 2-wire. Please see this video regarding Serial Connections.
Around 4:00 minutes if where Steve talks about RS485.
th-cam.com/video/PDuCidaDwUsc/w-d-xo.htmlonnect
Thanks for watching!
Hello! The “beep” of the keyboard can be turned off? If its possible, how it is done?
Hello Roland, please see the manual 5-7 pages, described below.
bzbgear.com/wp-content/uploads/2020/manuals/BG-CJ-RS-manual.pdf
In the System Menu Settings, select option #4 (SOUND)
• Move Joystick “left” and “right” to
turn key beep ON or OFF.
• Press “Enter” key to confirm.
Thanks for watching and commenting!
@@BZBTVchannel Thank you for your response!
hello. Are the camera positions saved forever or do I have to reconfigure them every time the controller is turned on? Thanks
Hello, the presets are saved in the memory until the controller is either reset or you create new presets over them.
Thanks for watching and commenting!
Is the an RS422 adaptor to Ethernet for long runs to a network hub ?? Lmk thanks
Hello, yes you can use Category (CAT5/6) cable to extend the signal, but the devices should have the bare wire connection screw terminals included for connection. What equipment are you working with?
We have great Tech Support department if you are using our Gear you can give us a call for help!
Tel: 1(888)499-9906 or Support@BZBGEAR.COM
Thanks for watching and commenting!
Question. What is the name of the dongle and where can it be purchased.
Hello, please give us a call or email and we can arrange to send you one!
1(888)499-9906
Support@BZBGEAR.COM
Thank you for watching!
@@BZBTVchannel thank you will do so right now.