I have two renegade race-x 36v 1000w quads for my boys. Will a 48v lithium battery aid with speed and usage time? My boys are getting bored of the ‘speed’ of them now but fit them well still.
That motor looks exactly like the one I’m doing atm, I’m not welding the diff. Could you give some advice on that angle you mentioned? I’m going 200a on a fardriver 72560
Can i do this to the brushed motor on my mobility scooter? Its 24v 650w 3900rpm I was thinking 36v 1000w ebike controller And 48v lead acid battery 20ah or 22ah as i have a few laying around Any help would be greatly appreciated 🙏 🙂
@@KiloVoltBikes If you didn't swap for a higher voltage you wouldn't need to change the controller, yes? Wish I was in the same country as you, would love to apprentice in your shop! Binge watchig your channel tho!
@@KiloVoltBikes Good content! Electric bikes are becoming a big thing so your timing too is right, I have almost 12k subs, I think you are going to pass me quick!
Hey again, Reading your reply I see that you now have a 80v battery and controller but a 48v (stock) motor, do you limit the power going to the motor in some way? Isn't there a possibility of the motor going belly up if you are supplying a 48v motor with 80v? Thanks!
I’m doing same to an electric dirt bike at minute but got Lipo batteries a sabvaton and upgraded to 3000w motor. Just need help setting sabvaton and rear axel set up can I bring down for you to sort pal
I did wander about the sanity of welding up the diff, makes it a lot harder to ride/ turn corners, don’t let anyone else on it that doesn’t understand what a fixed rear axle is going to do
Most production quad bikes such as - Yamaha raptor 450, 660 and 700 , Honda TRX and more all feature fixed axles . You will find diffs are rarely used in off-road ATVs . We fully get what your saying in regards to safety , but it’s just a quick bit of fun for the channel. ALLOT of power in that tiny frame is a recipe for danger ⛔️ No ones been brave enough to ride it since 😅
So on my kids electric quad could I just put a bigger battery that’s it to make it go faster
How’s this vid only on 120 views. Come on people share the vid and promote the work
Getting there slowly pal ⚡️🙏
He's a butcher that why
I have two renegade race-x 36v 1000w quads for my boys. Will a 48v lithium battery aid with speed and usage time? My boys are getting bored of the ‘speed’ of them now but fit them well still.
That motor looks exactly like the one I’m doing atm, I’m not welding the diff. Could you give some advice on that angle you mentioned? I’m going 200a on a fardriver 72560
Nice man, guess you been watching Andy Kirby ! Been thinking of doing this on one of those Electric go carts from eBay
Hahaha not watched it myself but been told about it ⚡️
Can i do this to the brushed motor on my mobility scooter? Its 24v 650w 3900rpm
I was thinking 36v 1000w ebike controller
And 48v lead acid battery 20ah or 22ah as i have a few laying around
Any help would be greatly appreciated 🙏 🙂
Worth a shot Mr Green. Send it ! ⚡️⚡️⚡️
Nice video man
Thanks David , enjoyed filming this one ⚡️
Hey! Let me know if I followed this correctly, you changed the controller because you changed the motor, yes?
Original setup was 48v battery motor and controller , we swapped to a 80v battery and big controller with the stock motor
@@KiloVoltBikes If you didn't swap for a higher voltage you wouldn't need to change the controller, yes?
Wish I was in the same country as you, would love to apprentice in your shop! Binge watchig your channel tho!
@@StreetArtistsOfTheWorld that’s correct ! Thanks for the time to watch our videos
@@KiloVoltBikes Good content! Electric bikes are becoming a big thing so your timing too is right, I have almost 12k subs, I think you are going to pass me quick!
Hey again,
Reading your reply I see that you now have a 80v battery and controller but a 48v (stock) motor, do you limit the power going to the motor in some way? Isn't there a possibility of the motor going belly up if you are supplying a 48v motor with 80v?
Thanks!
I’m doing same to an electric dirt bike at minute but got Lipo batteries a sabvaton and upgraded to 3000w motor. Just need help setting sabvaton and rear axel set up can I bring down for you to sort pal
Thanks, yes no problem bring it down we can take a look
Nice one do a vote for a another video of the set up. Would be a good watch
I got a mini dirt bike for my son 36V 1000W i want to make it faster, can you help ?
Contact us via Sales@kilovoltbikes.com we can defo help out
Decent fit man, have a comment 4 the algo
Nice one mate ⚡️🙏
👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽👍🏽
⚡️⚡️⚡️⚡️⚡️⚡️
I did wander about the sanity of welding up the diff, makes it a lot harder to ride/ turn corners, don’t let anyone else on it that doesn’t understand what a fixed rear axle is going to do
Most production quad bikes such as - Yamaha raptor 450, 660 and 700 , Honda TRX and more all feature fixed axles . You will find diffs are rarely used in off-road ATVs .
We fully get what your saying in regards to safety , but it’s just a quick bit of fun for the channel. ALLOT of power in that tiny frame is a recipe for danger ⛔️ No ones been brave enough to ride it since 😅