DiY PEMF//advanced setup\\continuously variable pulse frequency by a SOX audio script: 3pps to 32pps
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- DiY PEMF setup using LAPTOP, sound card, audio amp, ferrite transformer,
2 NPN transistors, reed relay & some free open source software
SOX SCRIPT USED:
play -V -r 192000 -n synth 90 sine 700+80000 vol -6 db repeat 300
the repeat command value determines the PEMF treatment time
Here is another close up photo of the PEMF PULSE, but this time hooked up to a 10 ohm resistor , hooked up to an identical coil sitting on top of the PEMF EMITTER COIL
imgur.com/a/5a...
**************************************************************************
NOTE: DO NOT TRY THIS YOURSELF without your DOCTOR's advise and training, and a professional electronic technician looking over and checking the wiring and hardware ! The output from a setup like this can produce dangerous voltages & currents if you set its current/voltage too high on the circuit structure... *also*, FAIL-SAFE safety features must be included, to prevent accidental over current/voltage damage to the equipment or to you...
DO NOT TRY THIS YOURSELF !
***************************************************************************
for more examples of building & using setups like this, see playlist:
• DiY build your own Mic... - วิทยาศาสตร์และเทคโนโลยี