ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Behringer Flow 8 - Using Effects on the Behringer Flow 8
ฝัง
- เผยแพร่เมื่อ 7 ส.ค. 2024
- The Behringer Flow 8 is an 8 input BlueTooth controlled audio mixer. In this video I go over the Effects section and how to start adding your effects into your mix or monitors!
Become a member and help support me and my channel: / drewbrashler
Find more resources and downloads at www.drewbrashler.com.
Chapters:
00:00 Intro
00:15 Behringer Flow 8 Sending Channels to the Effects
04:18 Adjusting Sound of the Effects
04:55 Using Phone App for Controlling Effects
05:30 Sending Effects to Monitors on the Behringer Flow 8
06:19 My Favorite Effects Settings
07:06 Conclusion
Products shown in this video:
Behringer Flow 8: imp.i114863.net/6bvnYq
Very helpful videos. Thank you so much for putting these together. You've certainly accelerated my learning curve. Much appreciated.
Thank you Drew, great video.
This video has been helpful. Thank you ❤
Glad it was helpful!
Very nice.. Thanks
Thanks for the very helpful explanation. Is it possible to activate a different effect in the input channels to the mixer? for example: Guitar fx chorus, vocal fx reverb, etc.. Thanks for your availability
This video is so helpful! Thank you! One question: what would be a good way to create a vocal double (aka John Lennon or Beatle type lead vocal)? Anyone?? Thx!!!
Hey Drew
Can the flow 8 be used for streaming, if yes, can you do a tutorial on that. Don't mind showing us how it can be used as an audio interface too
Thank you for your videos. I have issues with my Behringer XENYX X1222USB Premium where the compressor drops the volume or gain by almost half and my live recordings are severely affected. Any ideas or suggestions? I have the compressor knows all the way down to zero.
Hi Drew. How do you connect or setup a karaoke playet into flow 8? How do you setup it's gain using easy gain?
👍👍👍 I like concert effect as well. Do you know how to emulate this effect on X32?
Hi there…Is it possible to have different effect for each channel? Especially if having two singers singing at the same time…thank you
Did you ever figure this out? I'm struggling with this as well. Just wanting effects on one mic not al
@@goldensolsanctuary not really…i believe u can't…well,since my post, i didn’t really look into it as i was using only 1 mic lol and connected to my sx900 keyboard where i can manage the effects. Only instruments on the mixer and a phantom mic for ambient.
Hi Drew: I'm trying to figure out if there is any way to feed my mic on channel one on the Flow 8 into an Eventide H90 effects box and bring the fx signal back on separate stereo pair. I don't see a way to buss the signal from the mic channel to the input of the H90. Is there some way to do it through routing?
Hi, I've been trying to figure out a couple of things. Does it have to be a phone or can I connect via Bluetooth to an android tablet? Also, can I connect the 'USB out' to another tablet, Ipad or other, for multitrack recording? There are apps for multitrack recording which will enable me to save each of the stems then take them home and run them through my DAW. I could get a laptop but that's an expense I'm trying to avoid. Basically, I run an open mic night at our local pub, I would like to produce good quality, or at least better quality videos and sound recordings to showcase our local talent.
Hi I want to know how to setup EQ and reverb vocal microphone on flow 8
Can the tempo also be detected by the beat that comes from one of the channels?
It's probably a dumb question but could you make a video on how easy it might be to connect this to a DAW on my laptop? I have a PC and I have FL studio. I had somebody on TH-cam state that a digital mixer has zero latency compared to an interface could you explain how to connect this to a DAW?
Which one would you recommend and it's better than the other, behringer flow 8 vs zoom livetrak L-8
How do you adjust the amount of fx in the monitor
Is there an FX Send? I want the ability to loopback a fx pedal to an input. If that makes sense. A typical setup for dub music.
it's possible to combinate two effect?
guess you can ignore my comment on the overview video, looks like you can have separate effects on the monitors. im definitely going to pick this guy up
We use a Flow8 at our church. The help I have is timid and the workload is often too much, with a computer, two cameras, an ATEM and a Flow8. I have not attempted to add the handling of effects. I have wondered if there is a way to set them up and turn them on and off with a single button.
hello, built an user layer that it will be a great update
Great Video.
Can you setup different effect for each channel, or one setting of effects applies to all channels. Please explain if possible. Thanks heaps. ❤
The effect is one/two effects for all of the channels, and then you can vary the volume of the channels going to that effect.
are there already many vocal chain presets?
Hey Drew, I noticed a flaw with the software. (Bug) When you save a config, restart and reload the config, monitor 2 headset is at 0.
Do you have the same symptom?
Hallo, I want to record Vocals in direct monitoring on my DAW Cubase 12 and want to have effects only in my mix on monitor 1 and no effecst on the Main Mix. Is this possible? Thank you for help! Greetings Chris
Hi,
I have a Behringer Flow 8 with 2 Bose S1+ Pro PA speaker and a Behringer power subwoofer. How do I hook up to the flow 8. Please advise and thank you.
Depending on what subwoofer you have from Behringer, it might have a crossover built into the sub. Take the LR out from the Flow 8, take it to your subwoofer input first, then take the output of the subwoofer to your Bose S1+ Pro input.
Hope this helps!
Received my Flow today.. I actually bought this because of the Parametric EQ update.. Love Behringer FX on the Xair.. but found the Stereo delays (Ping Pong) to be very disappointing. No feedback setting??? Please add this.. this is really insurmountable. Also I noticed some phone disturbings, hearing small clicks every now and then.. Can't put my phone on top of it.. :-(
Better than Zoom Livetrack L8?
Thanks for the vid. Please tell me you can control the fx level to the monitor?!! I don’t think you can. 😩
I don't think you can adjust the fx returns to the monitors indeed. Correct me if I'm wrong please, but it seems to be shared with the fx return on the mains.
Real shame...this is kind of a deal breaker to me for an otherwise very handy compact mixer for small events...
@@oootinanai I've just seen this reply, thanks for confirming. Tis a shame.
Give one option to Mute Fx 1 Or Fx 2 on Mobile
Best microphone and effects settings for picking up drums while the drummer sings?
I noticed long ago that an engineer hooked up a lead singer/drummer with a microphone that picked up his drums very well from his vocal mic.
Can I have somehow apply High-pass and Low-pass filters for effects? Or maybe send effects to some channel, and that apply EQ to them?