That adjustment so you don't need to mod your case is genius. Now people can vertically mount their gpu's without having to permanently mod their case. Sick thinking seriously.
I like that it will also accommodate a DVI-D connector, which the Cablemod mount does not, or more than 2 cables. But I'd like to see some measurements of it and some pointers of whether my GPU card would fit alongside a CPU air cooler that overlaps all of the first PCI-E slot. It is only shown alongside liquid coolers. So it's not worth spending this much money on it to find out it won't fit with my GPU card and CPU cooler.
Hello, a sugestion for V3, the brackets on the PCI bracket area, have the first and last on the V3 bracket have brackets, and also, so you can keep the brackets in the slot, except the one for the HDMI cable, extend that side of the V3 so the screws can stay in (My case has big screws, so keep that in mind), it would look better, than having a hole at the back of the case.
One very important feature everyone ignores about the vertical holder is that it allows your M2 NVME SSDs to stay cool behind your graphics card. New motherboards have multiple M2 NVME slots right under the PCIe slot. If used without the vertical holder the SSDs have no adequate ventilation behind the graphic card. Use a vertical holder and you will get 7 to 10 degrees drop in temperature of the SSDs behind the graphic card.
Will there be a Version 3 with a PCI-E 4.0 riser cable? X570 motherboards can have problems with PCI-E 3.0 cables, and I don't exactly want to downgrade my MB to 3.0.
This I wonder too. If you run another card (like storage) you already lose half the bandwidth as the slots will go 8/8, then you halve it again by going 3.0
2:36 your GPU is still sagging and also it is flying (I like to stick to bottom of case and not fly in mid air) or at least adjustable so if someone want to have their SSD down there, they still can install it!
I bought one for my Corsair 220T and water cooled 1080Ti Thanks CM it’s a good design although perhaps a bit expensive. I customised it further by buying colour purple anodised thumbscrews to replace the stock black ones.
The drawback to the V1 model that I found was I could no longer use it with my RX 6700XT. My RX 590 fit but it was snug, the 6700XT extends into the area my Hyper 212 takes up. My case is a MC500P and I'd love to know if the V2 suffers the same issue.
This is SO cool. My ASUS TUF Gaming case has the vertical slots, but it's right up against the glass. My TUF Gaming RTX 3060 can still breathe, but not all that freely. One day I'll grab one of these 😍
So I can't fit my radiator uptop and have it in front with tubes down low like I should. If I run tubes up top it seems to vertical to pump and will result in gurgles. I have a bigger 3070 with 3 fans now to mount so I gotta figure it out. Either I get shorter ram but I dont want to replace totally fine ram. So started looking at these here. Will I maybe be able to route my tubes easier with onethese vertical mounts? P.S. just saw these are only pci 3.0 right? am i losing much with my 3070?
Why doesn't the manufacturer show up first when searching for the exact product? I went through a bunch of videos where no-one showed if using the HDMI/DP required chopping the case. Yet here we are, the manufacturer providing all necessary info where content creators missed.
Got one of these in my haf 700 case. Cant use it thanks to my air cooler being so large. Dont want to go out and buy an aio just for this. But if I want to drop the temps on my m.2 drives theres no choice. Always a catch with Coolerdisaster. But I keep buying it...
There's 3% increase max of FPS between a pcie 3.0 vs 4.0. So, keep your money, and adjust your bios on 3.0 4.0 is so commercial, and technically, the cable longer cause problem, riser are not the best way for performance, but aesthetically vertical have awesome look.
@@Maegrim- no but if you ever have to update change BIOs then you gotta replug the card in directly to motherboard to change it back from 4.0 to 3.0 or it wont recognize the card vertically mounted with the riser cable even. But yeah PCIe 4.0 is not supported by anybody right now really.
I had this same thought, but then I looked at my rig, and it seems like most traditionally mounted GPUs are snugged right up against the chipset, anyway. I would LIKE to think that any extra heat from the FE cards firing exhaust at the chipset (or vice versa) would be offset by the extra space this puts between the card and board (more airflow, basically). Not that I will ever get to test that theory...RTX 3000 appears to be largely a myth, at this point.
@@truonghuy9611 Yeah, thats true, i wish you could buy both of them together for set price, thats whats holding me back from buying both separately $130 for both.........lol
@@johnrumely4099 Let's just wait for the Bracket with PCIE 4.0 to be released in the US then. I see a few pop up in European stores and Asian stores for about $50-$60
But you can't fit a DVI Connector through the struts. You have to cut the struts and hat looks terrible. Or you have to slight the graphic card all the way to the side and go with the DVI plug on the right side of the case which does not look right.
Just got one of these and wholly disappointed with it :-( Main problem is that the riser cable is quite stiff and a bit too long. So, when mounted the cable is curled up against the motherboard and GPU mount, which pushes it out on the non-secured end. So, instead of sag I've got skew!! :-/ Also, with an air cooler (I have a Cooler Master Hyper 212) the GPU is extremely close to the cooler. No more than a couple of mm gap. So be aware of this if you're thinking of buying one. Wouldn't be a problem with an AIO. But I'd say this is not quite as 'universal' as Cooler Master say. It really depends on what you have in your case.
OK, now you figure how to make it universal, next is how to allow at least 1 extra PCI slot for a capture card as the community asked 6 years ago. Will they have to wait another 5 years I think. I got mine done already. elgato 4K60 pro and RTX 2080S on vertical display.
My system has an extra sound card which I use to power bass transducers through an external 4 channel amplifier. This solution would not allow any extra cards to in installed, right?
Thanks for this great explanatory video. I have an RTX 3080 Rog Strix White gpu that i would like to show off vertically and also have a Mobo with Pcie 4.0, is there any performance issue if a use the pcei 3.0 raiser cable?
Can I switch the Risercable? I got the TD500 Mesh and a RTX 3060 with PCI-e 4.0 but the cable here has only PCI-e 3.0. Would be just amazing if this was possible. If it is possible I’ll buy it Instantly.
but if you have other stuff added to your pcie slots like extra usb expansion card, wifi card, then i dont think you can use this Version 2 or even version 1 right ?
how much interference will you have with a large aircooler if you also have a rather wide graphics card? Seems like you have very limited space for those with tower coolers. Would that red devil fit in the previous case with aircooler for instance?
Id like to ask same question. I got exact same cooler (CM hyper 212) and v1 card holder. Im going to buy GPU but looks like there is not enough space for wide GPU and CPU air cooler. I think my corsair dominator heatsink can be problem too. Its even lower than CPU cooler.
@@christos_x8653 and where Do you plug them in when the gpu holder Blocks All other Pci-E slots? The holder does Not have additional room for a Sound card. So your comment is pointless :(
Can you install this CM v2, and then possibly have the top PCIE express slot empty for sound card/wifi card? (Assuming the PCIE express is on top of the motherboard), I am using a lianli o11 dynamic case.
Guys, installing this CM holder v2, do you think you are able to get the PCIE express slot (the one above GPU) empty so that you can install sound/wifi card onto it? Lianli o11 dynamic case.
neat option to have it not destructive like other kits, but i still prefer having a sound card in the lowest slot and this just blocks ALL the PCI-e ports.
Do you have a version that can still use other pice slots? I need to use another 2 slots for a special connection. By the way, appreciate this product.
can you put a 2.7 slot card in the version 2 mount? found someone who put a asus 3080 tuf oc its a 2.7 slot card in this vertical mount so it will work
beautiful- that adjustment feature is perfect for me
Setup tour?? :O
Ok
This is what i have been looking for ages, with out cutting the back of my cpu case. thank you for this amazing video. more power cool master!
That adjustment so you don't need to mod your case is genius. Now people can vertically mount their gpu's without having to permanently mod their case. Sick thinking seriously.
IMHO it took way too long to come up with this kind of design but boy when it's here....!
I like that it will also accommodate a DVI-D connector, which the Cablemod mount does not, or more than 2 cables. But I'd like to see some measurements of it and some pointers of whether my GPU card would fit alongside a CPU air cooler that overlaps all of the first PCI-E slot. It is only shown alongside liquid coolers. So it's not worth spending this much money on it to find out it won't fit with my GPU card and CPU cooler.
Hello, a sugestion for V3, the brackets on the PCI bracket area, have the first and last on the V3 bracket have brackets, and also, so you can keep the brackets in the slot, except the one for the HDMI cable, extend that side of the V3 so the screws can stay in (My case has big screws, so keep that in mind), it would look better, than having a hole at the back of the case.
One very important feature everyone ignores about the vertical holder is that it allows your M2 NVME SSDs to stay cool behind your graphics card. New motherboards have multiple M2 NVME slots right under the PCIe slot. If used without the vertical holder the SSDs have no adequate ventilation behind the graphic card. Use a vertical holder and you will get 7 to 10 degrees drop in temperature of the SSDs behind the graphic card.
This video explained everything I needed to know. I just bought one off Amazon.
The mount doesn't look very rigid
bruh shut up just put something under it this thing is a game changer
Yeah bruh shut up
yes!, just what i needed to make my pc look less empty!
I totally feel ya xD
Will there be a Version 3 with a PCI-E 4.0 riser cable? X570 motherboards can have problems with PCI-E 3.0 cables, and I don't exactly want to downgrade my MB to 3.0.
bios you can select gen 3, everyone has it
A 3090 doesn’t even max out pcie 2 16x , it’s been proven
@@Neosin1 Yeah, you won’t have any performance dip using PCIe gen 3. The bandwidth needed isn’t high enough yet.
This I wonder too. If you run another card (like storage) you already lose half the bandwidth as the slots will go 8/8, then you halve it again by going 3.0
Agreed bro
2:36 your GPU is still sagging and also it is flying (I like to stick to bottom of case and not fly in mid air) or at least adjustable so if someone want to have their SSD down there, they still can install it!
I bought one for my Corsair 220T and water cooled 1080Ti Thanks CM it’s a good design although perhaps a bit expensive. I customised it further by buying colour purple anodised thumbscrews to replace the stock black ones.
Can you put 3 slot cards in there? The spec sheet says it only supports up to 2.5 slots but there is no obstruction at the front so maybe ok?
I’m in same predicament I have a 3 slot card will this work?!
The drawback to the V1 model that I found was I could no longer use it with my RX 6700XT. My RX 590 fit but it was snug, the 6700XT extends into the area my Hyper 212 takes up. My case is a MC500P and I'd love to know if the V2 suffers the same issue.
Just bought v2 and tried yesterday...my gpu did kissed my hyper 212~~
What about pci 4.0 compatability.
Wow it looks like you guys nailed it
this video makes all my doubts gone. thankyou
what a beautiful masterpiece.
I have a Cooler Master HAF-XM and Galax 3080ti SG, will this fit in my case?
Hey, I everywhere hear "that's for 2.5 slot gpu" Can I use this for 4 slot gpu
This is SO cool. My ASUS TUF Gaming case has the vertical slots, but it's right up against the glass. My TUF Gaming RTX 3060 can still breathe, but not all that freely. One day I'll grab one of these 😍
man the tuf 3060 is so overbuilt that you honestly don't need to worry about it. Now the TUF 3080 on the other hand..... x.x
@@Eyeofnelms I actually ended up selling it. I found a Founders Edition 3080 Ti and went with it instead. Runs SO much hotter lol
So I can't fit my radiator uptop and have it in front with tubes down low like I should. If I run tubes up top it seems to vertical to pump and will result in gurgles. I have a bigger 3070 with 3 fans now to mount so I gotta figure it out. Either I get shorter ram but I dont want to replace totally fine ram. So started looking at these here. Will I maybe be able to route my tubes easier with onethese vertical mounts?
P.S. just saw these are only pci 3.0 right? am i losing much with my 3070?
Is this compatible with rtx 3080?
it is a pcie slot. Your card will fit in it but will it fit in your case...
@@TheMaroth He might be asking about pci 4.0 compatability.
it's perfectly comfortable with a cooler master masterbox mb520 argb ?
Why doesn't the manufacturer show up first when searching for the exact product? I went through a bunch of videos where no-one showed if using the HDMI/DP required chopping the case. Yet here we are, the manufacturer providing all necessary info where content creators missed.
What is the clearance between the card and the motherboard?
very simple video, very nice explained! very nice and logic product, you convinced me!
Got one of these in my haf 700 case.
Cant use it thanks to my air cooler being so large.
Dont want to go out and buy an aio just for this.
But if I want to drop the temps on my m.2 drives theres no choice.
Always a catch with Coolerdisaster.
But I keep buying it...
India🇮🇳: Gracias amigo 🤗
FULL STAR RATING :⭐⭐⭐⭐⭐
I LOVE this guys accent
There's 3% increase max of FPS between a pcie 3.0 vs 4.0.
So, keep your money, and adjust your bios on 3.0
4.0 is so commercial, and technically, the cable longer cause problem, riser are not the best way for performance, but aesthetically vertical have awesome look.
I have a doubt
Now i use Asus rog strix rtx 3070 OC GPU
with Coolermaster TD500 Mesh black case
can i use this tool for mounting vertical gpu
Genius engineering. keep it up cool master.
Thank you very much. We hope to keep making products that improve everyone's PC building experience. Cheers!
When are you releasing one for pcei gen 4? my rtx 3080 needs tat gen 4 fix!
Just buy an extra pcie 4.0 riser cable you can get one of amazon from linkup
Pci3 performance is not noticably lower on a 3080
@@Maegrim- no but if you ever have to update change BIOs then you gotta replug the card in directly to motherboard to change it back from 4.0 to 3.0 or it wont recognize the card vertically mounted with the riser cable even. But yeah PCIe 4.0 is not supported by anybody right now really.
@@Cipher_8 i updated the bios of my 3080 and didn't need to remove the riser
@@Maegrim- your screen didn't go black? Some riser MB combinations don't but some do. It's not universal. You got lucky one I guess.
Gonna put this in my rack mount case
Hay, I have a question what happened to MA620P. There is also version 2 is coming or it's completely dissipate ?😢
I am not sure if the RTX 3080/3090 FE would perform adequately in a vertical position with boards that have a chipset fan like the X570.
I had this same thought, but then I looked at my rig, and it seems like most traditionally mounted GPUs are snugged right up against the chipset, anyway. I would LIKE to think that any extra heat from the FE cards firing exhaust at the chipset (or vice versa) would be offset by the extra space this puts between the card and board (more airflow, basically).
Not that I will ever get to test that theory...RTX 3000 appears to be largely a myth, at this point.
@@goodwolf152 Rebranded 2000
Hi, do you know when is the UNIVERSAL VERTICAL GRAPHICS CARD HOLDER KIT V2 (PCIE4.0) available in the US? I need the PCIE 4.0
You can get the cable off amazon.
@@johnrumely4099 Bracket is like $60, and the cable is like $50, so for both of them, it's more than $100. Too expensive for me
@@truonghuy9611 Yeah, thats true, i wish you could buy both of them together for set price, thats whats holding me back from buying both separately $130 for both.........lol
@@johnrumely4099 Let's just wait for the Bracket with PCIE 4.0 to be released in the US then. I see a few pop up in European stores and Asian stores for about $50-$60
@@truonghuy9611 wow, yeah definitely worth the wait then!
But you can't fit a DVI Connector through the struts. You have to cut the struts and hat looks terrible. Or you have to slight the graphic card all the way to the side and go with the DVI plug on the right side of the case which does not look right.
KK, thats cool and all but do you have any recommendation for 3 Slot Cards?
How bad will this affect cooling ?
my case cooler master mb511, Vertical Graphics Card Holder Kit V2 with Riser Cable would fit in here ?
Can you fit a wificard in the case with the vertical gpu mount
Yes you can. Anything that goes into a GPU slot works
Just got one of these and wholly disappointed with it :-( Main problem is that the riser cable is quite stiff and a bit too long. So, when mounted the cable is curled up against the motherboard and GPU mount, which pushes it out on the non-secured end. So, instead of sag I've got skew!! :-/ Also, with an air cooler (I have a Cooler Master Hyper 212) the GPU is extremely close to the cooler. No more than a couple of mm gap. So be aware of this if you're thinking of buying one. Wouldn't be a problem with an AIO. But I'd say this is not quite as 'universal' as Cooler Master say. It really depends on what you have in your case.
Seconded, facing the same issues due to the cable :/
Please have a white version for this
And with the Bigger DP Cable? cut struds out?
OK, now you figure how to make it universal, next is how to allow at least 1 extra PCI slot for a capture card as the community asked 6 years ago. Will they have to wait another 5 years I think.
I got mine done already. elgato 4K60 pro and RTX 2080S on vertical display.
Hello! Is it possible to use Cooler Master Vertical Graphics Card Holder Kit V2 with PCI-E 4.0 with Noctua NH-D15 chromax.black?
Does it fit in the circle phoenix cabinet please reply
My system has an extra sound card which I use to power bass transducers through an external 4 channel amplifier. This solution would not allow any extra cards to in installed, right?
So what happens if i have a dedicated sound card, or Network adapter or both?
This holder kit is compatible with the case MasterBox MB320L MATX?
So what if I have a wifi card, am I just not able to have a vertical mount?
Thanks for this great explanatory video. I have an RTX 3080 Rog Strix White gpu that i would like to show off vertically and also have a Mobo with Pcie 4.0, is there any performance issue if a use the pcei 3.0 raiser cable?
they release the pcie gen 4 version so that pretty cool
@@fudgewaffle4742 the gen 4 version is much more expensive though... will this mount not work with 30 series rtx cards or with mobo with PCI 4?
can i use the pcie x4 slot at the back of the gpu when using that vertical mount?
No. It will block the PCIE slot.
it's what I was looking for! thank you!
i just bough mine yesterday and that sliding feature is great solution specially my HDMI socket is in the outmost corner of my gpu
Can I ask something? My case has 4 slots to screw on a gpu. Will this holder fit? The power supply is underneath and I don't know if it will fit.
No, you need 7 expansion slots at least.
@@Decommissioned Ok, thanks.
If knowbody mines helping me with the reaserch would this work with my Apevia Genesis case?
a PCIE 4 riser cable is needed form what i have seen for new cards so this will not work then.. any version with a PCIE 4 riser cable ??
Can I switch the Risercable? I got the TD500 Mesh and a RTX 3060 with PCI-e 4.0 but the cable here has only PCI-e 3.0. Would be just amazing if this was possible. If it is possible I’ll buy it Instantly.
Is it compatible with a cooler as big as the hyper212 turbo and a graphics card as big as the MSI gaming X 1660S
the case is bitfenix INSO mesh
Would this work in my Apevia Genesis case?
Well done on this one cooler master
i've the case Mastercase MC500P, can install VERTICAL Holder and HAVE 2 free pci slot, that i need for extra USB ports ? THANKS
but if you have other stuff added to your pcie slots like extra usb expansion card, wifi card, then i dont think you can use this Version 2 or even version 1 right ?
Hi P Guardiola . Do you have any a-rgb tutorial video for cooler master a-rgb products?
does it support 30 series gpu ?
The Ver 2 kit price is pricier than the case XD
Nope its just 30 usd
@@sudakshinatopader It's $99 now
Hi, does this only run @ PCIe 8x? as mine won't run @ PCIe 16x. it also crashes the AMD software on my AMD vega 64. thanks.
Can youn supply a pcie gen 4 riser cable with this kit
Nice but need a 3 slot for 3090.
how much interference will you have with a large aircooler if you also have a rather wide graphics card? Seems like you have very limited space for those with tower coolers.
Would that red devil fit in the previous case with aircooler for instance?
Id like to ask same question. I got exact same cooler (CM hyper 212) and v1 card holder. Im going to buy GPU but looks like there is not enough space for wide GPU and CPU air cooler. I think my corsair dominator heatsink can be problem too. Its even lower than CPU cooler.
Yes, I want to add a Deepcool AK620 cooler in my CM HAF-XM.
Will the bracket , holding a 3-slot 3080ti , play nice with the AK620 Cooler?
Sadly if you have a seperate Soundcard or other card like a Capture Card etc. you can´t use that holder.
Ya, u are right 👍
There are extension cables for sound cards.
@@christos_x8653 and where Do you plug them in when the gpu holder Blocks All other Pci-E slots? The holder does Not have additional room for a Sound card. So your comment is pointless :(
@@Flachkraecker mount it also vertically behind gpu or above or below provided some space. Or even make it external.
is this cable are pcie 3.0 x16?
is the riser cable 4 4 as i have a gen 4 pcie slots on my broad if not can you use a diffent riser cable then one comes with it?
Does V2 work with RTX 4090 models?
Can you install this CM v2, and then possibly have the top PCIE express slot empty for sound card/wifi card? (Assuming the PCIE express is on top of the motherboard), I am using a lianli o11 dynamic case.
His accent is soo amazing !!!!
Why does V2 not support PCIe Gen4?
I dunno why but I really like his accent
Use The Riser Cable Can Make heat or not? i want to know riser cable can damage my GPU or my Main-board?
Would this work with a lian li O11 and still allow you to mount fans at the bottom?
Their old version did support this, so why wouldnt this?
MrClue Was just trying to confirm.
@@Silence4725 haha wasnt being aggressive :)
MrClue No worries man. I bought it anyway.
Guys, installing this CM holder v2, do you think you are able to get the PCIE express slot (the one above GPU) empty so that you can install sound/wifi card onto it? Lianli o11 dynamic case.
I will buy this for my build!
Will it work if my gpu bracket has only 1 prong instead of 2 at the bottom of the bracket where it inserts in the support ?
Why not with a PCIe 4.0 cable?
Is it possible to upgrade the riser cable to a PCI-E Gen 4 ?
You guys should make this in pcie 4.0 for the AMD Users.
this is all very good but cover ALL the PCI slots your screwed if your using more than one PCI for Example I have a PCI bluetooth card
neat option to have it not destructive like other kits, but i still prefer having a sound card in the lowest slot and this just blocks ALL the PCI-e ports.
when are you gonna release a version with a pci e 4.0?
On a regular 7 pcie slot case, how much space would be under the gpu?
Do you have a version that can still use other pice slots? I need to use another 2 slots for a special connection. By the way, appreciate this product.
Will this work with a very old Cooler Master Casing, namely the Cooler Master Elite 371 casing? lol. Thinking to buy and just adjust that casing. xD
Hi, do you think it will fit in td300?
this is compatible with the old CM storm Trooper ATX full tower?
Can I use it in my cooler master mb511 cabinet?
can i swap the riser cable with any other pcie 4.0? is the size universal
quando vai ter disponivel no brasil ?
can you put a 2.7 slot card in the version 2 mount? found someone who put a asus 3080 tuf oc its a 2.7 slot card in this vertical mount so it will work
Can I use riser cable V2 for vertical GPU holder kit V1 ?