couple points: - Extremebull has stated that boatshipped units have silicone globs to seal the battery cable holes - i wouldn't suggest sealing that hold in the middle of the wheel -> as it'll prevent water from draining near the trolley handle sink.
Hello Marty ! Hope all is well with you ! I just ordered Version 03 of the Commander Pro ? Not 100% sure what that is. It's not the GT but it does have a RED handle. Expected delivery date is July/end of July ... Have you heard of this by any chance ? Cheers and Thanks !!
@@jakedwight9893 just let the air out and squeeze the tires. you can spray the rim with soapy water, how hard is that? everyone should also know how to balance their own wheel, which is not that hard either.
I’m feeling the pain and loneliness for all your wheels being neglected so I would like to come by and instead of a dog walker I can be your euc walker/rider 😂 Let me ride some of that dust off them and show them some attention lol
I have to say disappointed in the "upgrade" and quality. It does seem like a perfomance wheel but I guess we'll see that when you get a chance to ride.
@@ElectricUnicycles The charging Port, the front where you can tell where they look like they where going to build more to it. The build quality is still basically the same which is why Eevees rejected the wheel. They gotta do better. Look at your ex30
@@ElectricUnicycles I know that you are an influencer and have connections to them so you can't get on them but as for regular people like myself that see these constant issues when they want for you to spend 4000 and up, it's not acceptable.
Obligated to review wheels sounds like a job. Right no..... The Sherman S is where the game is at. The quality is much better. I would rather roll up on the red carpet on a sherman s or even a Sherman max. It just has a class the begode wheels don't
Do the suspension leaks some people have experienced concern you with the Sherman S. I want a Sherman S but the leaks have me worried. Might do the EX30 instead now
@Freeforester much easier fix than having to disassemble the wheel totally to replace shock seals. I want sherman s still, but personal worry of mine for when I need to service.
@@robm425 perhaps, for you. All the ‘S’ teardown videos seem to indicate how straightforward this procedure would be (I have as yet not seen anyone having to do this, but hardcore jumpers may have to do so before mere mortals); for sure, replacing a Begode battery pack shouldn’t be too difficult, providing the voltage is exactly as the other packs are in the wheel, and that it doesn’t go on fire (both scenarios are possible outcomes); of course, with reliably made wheels, neither scenario should be required…. One has to wonder why it was that the Leaperkim engineers all left Gotway to set up their own company…🤔
Thanks for the update Marty! Much appreciated!
couple points:
- Extremebull has stated that boatshipped units have silicone globs to seal the battery cable holes
- i wouldn't suggest sealing that hold in the middle of the wheel -> as it'll prevent water from draining near the trolley handle sink.
Better to 3D print a cover for the whole top
Man you guys are so lucky to get all these cool wheels, meanwhile I'm saving up for my first one, I envy u Marty.
Wow Marty! New Wheel time!? Again!? 😮😅😊❤
Can't wait for mine! Hope it's batch 2 😅
Hello Marty ! Hope all is well with you ! I just ordered Version 03 of the Commander Pro ? Not 100% sure what that is. It's not the GT but it does have a RED handle. Expected delivery date is July/end of July ... Have you heard of this by any chance ? Cheers and Thanks !!
I like that new tire. More rubber but also should still be decent off-road
Could you ride the wheel in light rain or are there too many water ingress points?
Mine arrived last week with leaking suspension
:-(
How many amps do you set the Roger charger to when charging the Commander Pro at home? 🤔
At home I usually use the stock charger since I'm not in a hurry. On the road, ~10-amps
What tyre is that marty?
I don't know. I believe in the video I provide the name of the brand. I don't have the wheel anymore to check.
Is there a seat for the Commander Pro? 🤔
I'm going to velcro a cushion to the trolley handle and hopefully keep the handle functional lol
Good morning. Which unicycle would you buy for someone who has never ridden. Thank you
Kingsong 14D is a good starter.
Are you able to charge it up to 134v? I can only get mines to charge 132.8v
hello, is there a solution to have a higher trolley?
Not really :-(
Try riding it, Denis Hagov said he's got his Commander Pro with a defective unbalanced tire.
Tires are easily fixed
@@ElectricUnicycles At this price point, they shouldn't have to be 'fixed'
@@jakedwight9893 just let the air out and squeeze the tires. you can spray the rim with soapy water, how hard is that? everyone should also know how to balance their own wheel, which is not that hard either.
@@jakedwight9893 on euc, not all tires comes out perfect. You will have to do minor "Fix", more so adjustments than fixes.
I was under impression that Denis's particular tire can only be replaced with a non-defective one, he tried to fix the things a bit.
I’m feeling the pain and loneliness for all your wheels being neglected so I would like to come by and instead of a dog walker I can be your euc walker/rider 😂
Let me ride some of that dust off them and show them some attention lol
LOL
New tyre look very promising …
Yes, I thought the tire was nice and unusual for a stock tire
@@ElectricUnicycles Can I ask you to write name or code of this tyre. It must be specified somewhere on its surface.
Put my down payment in at eWheels for a Batch 3.
metal shavings because they didnt thoroughly clean the machined aluminum before putting it together
I have to say disappointed in the "upgrade" and quality. It does seem like a perfomance wheel but I guess we'll see that when you get a chance to ride.
Must be so frustrating getting all those wheels...
No shit. I know he's kidding but it still pisses me off lol. I'm still riding my first wheel with only 1 more year of financing to go ! :(
Yeah, I hate it :-)
Those shavings will ruin the bearings very quickly, this wheel needs to be pulled apart and cleaned throughout
ex30 down, commander pro time
Are you choosing not to do a review the Sherman-S, you make reference to it but no real solid review on such a popular long-range wheel???
I was never provided a Sherman S for evaluation. I've only had the opportunity to ride friends Sherman S's for short periods.
Soooooooooooo, they released a batch 2 without really fixing the issues of the first completely or at all?!!! Lol can't make this Ishhh up!
They absolutely did fix a few things :-)
@@ElectricUnicycles The charging Port, the front where you can tell where they look like they where going to build more to it. The build quality is still basically the same which is why Eevees rejected the wheel. They gotta do better. Look at your ex30
@@ElectricUnicycles I know that you are an influencer and have connections to them so you can't get on them but as for regular people like myself that see these constant issues when they want for you to spend 4000 and up, it's not acceptable.
👍👍
im view 329
Obligated to review wheels sounds like a job. Right no..... The Sherman S is where the game is at. The quality is much better. I would rather roll up on the red carpet on a sherman s or even a Sherman max. It just has a class the begode wheels don't
Do the suspension leaks some people have experienced concern you with the Sherman S. I want a Sherman S but the leaks have me worried. Might do the EX30 instead now
@@robm425 No lab leaks here.
@@robm425 check out Marty’s first ride of the EX 30 (it expired at 30 miles!).
@Freeforester much easier fix than having to disassemble the wheel totally to replace shock seals. I want sherman s still, but personal worry of mine for when I need to service.
@@robm425 perhaps, for you. All the ‘S’ teardown videos seem to indicate how straightforward this procedure would be (I have as yet not seen anyone having to do this, but hardcore jumpers may have to do so before mere mortals); for sure, replacing a Begode battery pack shouldn’t be too difficult, providing the voltage is exactly as the other packs are in the wheel, and that it doesn’t go on fire (both scenarios are possible outcomes); of course, with reliably made wheels, neither scenario should be required…. One has to wonder why it was that the Leaperkim engineers all left Gotway to set up their own company…🤔