Is that a vacuum line or a coolant line? It seemed to be connected to the thermostat junction. By the way the nut on my EGR valve is 12mm and not 10mm.
What did you use to lubricate the connector at 0:57 ? All the connectors in my car are stuck but I worry that using lubricants like WD40 can contaminate them. Also if I didn’t notice any symptoms is it still worth it to remove and clean the EGR valve?
hello sir, I need help please, I have a car like Mazda 2 from 2009 1.3L and every morning when I start it the engine shakes for the first 10 minutes, after the temperature becomes normal and for the rest of the day the Even if the car is turned off and restarted, nothing else happens. The next day, when I start the engine again for the first few minutes, it shakes a lot. Do you know what the error is?
Hi. My Mazda 2 does not start in the morning until I pump the lift pump. Am told I could be because the fuel is below the half mark. What do you think is the cause?
I could'nt find any other video of how to remove the egr valve for a mazda 2. Thanks for the upload. I have been getting a P0401 error "Exhaust Gas Re-flow Insufficient Detected" most likely the egr valve is left closed due to carbon deposit.
Hi, my 10yrs old mazda 2 having problem with the engine light up and the "HOLD" light flashing.i had overhaul the gearbox coz mechanics got read the faulty code P0758. The problem still remaining.cld pls help on this.
It's the shift solenoid issue. Overhauling the gearbox wasn't necessary. You can check in TH-cam on how to check the solenoid without disassembling the gearbox and the equipment you need is only a multimeter
Thank you, I've got this job ahead of me and your video has already saved me a lot of trouble.
Glad it helped
Is that a vacuum line or a coolant line? It seemed to be connected to the thermostat junction. By the way the nut on my EGR valve is 12mm and not 10mm.
What did you use to lubricate the connector at 0:57 ? All the connectors in my car are stuck but I worry that using lubricants like WD40 can contaminate them.
Also if I didn’t notice any symptoms is it still worth it to remove and clean the EGR valve?
hello sir, I need help please, I have a car like Mazda 2 from 2009 1.3L and every morning when I start it the engine shakes for the first 10 minutes, after the temperature becomes normal and for the rest of the day the Even if the car is turned off and restarted, nothing else happens. The next day, when I start the engine again for the first few minutes, it shakes a lot. Do you know what the error is?
How did u remove the pins at the right bottom of the engine cover? Do we need to drill it?
Привет . какой жидкостью промывал ?
Hi. My Mazda 2 does not start in the morning until I pump the lift pump. Am told I could be because the fuel is below the half mark. What do you think is the cause?
Good video but that hose is not a vacuum hose it's a coolant hose used to cool off the egr valve
I could'nt find any other video of how to remove the egr valve for a mazda 2. Thanks for the upload. I have been getting a P0401 error "Exhaust Gas Re-flow Insufficient Detected" most likely the egr valve is left closed due to carbon deposit.
The best is to comand the valve to close with a scan tool and look for any idle change . If not remove and inspect it
Esa válvula tiene 6 pines?
Hi, my 10yrs old mazda 2 having problem with the engine light up and the "HOLD" light flashing.i had overhaul the gearbox coz mechanics got read the faulty code P0758. The problem still remaining.cld pls help on this.
Hard to tell without a proper diagnose . I don't think the overhaul was necessary. Do you have a scan tool with live data reading ?
It's the shift solenoid issue. Overhauling the gearbox wasn't necessary. You can check in TH-cam on how to check the solenoid without disassembling the gearbox and the equipment you need is only a multimeter
Will this help P2188?
it's possible
Thank you 🙏
Thanks so much
Good