Haha I actually spell it the American way since I lived there for a bit and most of my following is from there, less confusion. But ya man, I'll be doing the separations tutorial soon when I get some time 🤘🏻
Very nice sir and good explanation. I can take the info and use my Corel Draw to do the same. Do you have a video of next step, taking the transparency to place it on screen for exposure? TIA
so I now have my illustrator template.. what is the best way to get these regs marks onto my colour seps that i did in photoshop.. all different files for each colour print.
Hey bro. I use CS5 still. I can figure out why when I draw the line with my pen tool it makes a blue line and starts center and widens as I draw the line. I tried changing the width too and it wont let me change it to .7 inch. Please let me know how to get the black line like you have in the video. Thanks
I dont like Mac , But what that you were holding ??? AAARGGGG You going to FAST. I'm trying to learn this. All you You tubers arn't explaining too well how to go about it. I Need step by step.
Hey Lee Thank you for all you do! I got thru everything expanded and when I chose "unite" the square fills in black??? I am using a PC and have tried several things with no success. Any suggestions?
Okay, I am just getting into screen printing. But I learned WAY more in this 10-minute video about adobe than the first 15 videos I have watched about Adobe. Thank you so much for the help.
Thank you very much. My printer can do 13x19 but never printed anything that size from it. Looks like some test runs. Appreciate the reply. Taking the plunge from vinyl to screen printing. From your videos looks like I'm in for a ride. Keep up the content brother. Awesome to see someone building something out of nothing.
i bumped into your channel by accident when you posted the video of your finished printshop and ive watched you ever since man! my wife says you remind her of me, biz wise and we look similar she says haha! i started my shop a year ago #PRINTLIFE . btw your shop is dope af!! your videos always help even if its just watching someone else that loves printing like myself! ✌ from NC, USA keep up the dope fucking work Lee Stuart!
Awesome video. This helps a lot. I am starting to learn screen print, I find it to be a good skill. I am struggling with illustrator (pics to vector, illustrator set up) so these videos help a great deal. You explain everything in detail, each move. Others talk as we know illustrator already. Practice practice practice.. Thanks again.
Man I been using + signs for my reg tried your reg Marx today and BAM life became so much easier haha took a 15 sweat suit printed some stuff on it sold it for 125 haha but fr fr appreciate the tutorial
This was great! I'm a newbie and this was by far the most thorough and helpful tutorial I've watched! I created my first registration marks thanks to you!
Consider on your reg marks to use the reg mark stroke, rather than black. The reason you want to do this is that when you do multi-color/sim process down the road, you don't want to have to make multiple reg marks for all the different colors. It will always print off regardless of what color you use. I hope that makes sense. :) BTW it's in the color pallet that looks like a reg mark.
Your platens mate. How do you position your artwork in illustrator to then match up with you grid on your platen? I've got mine set up in a way where it's the same everytime. Be interesting to see how you do yours?
Whats the advantage of using squares over circles? I saw them in your previous video so I tested them out, but my printers said it was harder to line up. Perhaps they arent as concerned with registration as you are, idk.
I've been racing motocross, snowcross and all kinds of other things my whole life, I was a pro rider for a long time. 38 was my number I started with as a kid and I've held onto it in some way through my whole career and now into other things
Click here bit.ly/leestuart38 to subscribe for more rad stuff, and click that damn bell for me!
YOU NEED TO DO MORE ILLUSTRATOR/PHOTOSHOP TUTORIALS FOR ARTWORK SCREEN PRINTING PLEASE !!!!!
Hi easiest explanation so far can I use those ref marks for large images on my cricut machine
Thanks
thank you
Bangin' Bro. Next up,,,,,Easy colour (notice spelling there) lol separations in Illustrator, Yeah, Thought so Bro lol. Good stuff Lee
Haha I actually spell it the American way since I lived there for a bit and most of my following is from there, less confusion. But ya man, I'll be doing the separations tutorial soon when I get some time 🤘🏻
You crushed this tutorial. Please do more of these type of videos. It is super interesting and it’s more enjoyable to learn from a homie.
Thanks brother. Definitely got more of this coming in the future
you have a gift for explaining things! Please do a tutorial on color separation and preparing the artwork in general.
Thanks! I plan on doing that one real soon
I thought Canadians didn't use inches, but I guess I was wrong. Maybe that shouldn't be what I take away from this video, but who cares!
That's the best Illustrator tutorial I ever seen!
Hello, I'm currently attempting my first order but don't know how to add these registration marks in photoshop ?
Very nice sir and good explanation. I can take the info and use my Corel Draw to do the same. Do you have a video of next step, taking the transparency to place it on screen for exposure? TIA
Thanks for the tips. But this could be a 2 min vid :)
I’ve learned so much from your tutorials. Thank you. Subscribed.
Hey man how come my line is black but the square I make is a very light grey ?
Awesome been waiting for this one good job buddy killed it bring on some more vids 💪
Glad you liked it man, was cool to do my first tutorial 🤘🏻
Thank you, you have made this so easy to follow 🙂
Watched the whole video with no intention of ever doing this. Great tutorial.
That's a good sign that it didn't totally suck haha. Thanks man!
Cheers mate. Love from Australia
You did great
Spot color in illustrator
That one is definitely coming
your a life saver thank you.
If I don’t know what film size I’m using what do I input ? I’ll be printing my films out with staples & im not sure which they use
Another thing, my illustrator doesn’t show “width & height” in the top tool bar
Good video how about in photoshop?
so I now have my illustrator template.. what is the best way to get these regs marks onto my colour seps that i did in photoshop.. all different files for each colour print.
Copy/paste them in there
Loved the design tutorial! Keep it up Lee!
Thank you brother,was very helpful..god bless
Glad to help
Very informative video. Can you do a video on print setup without having software to be able to print to STAPLES. PLEASSEEE thanks lol
Hi easiest explanation so far can I use those ref marks for large images on my cricut machine
Thanks
You sure can 👍🏻
How is this the easy way? Can't you just cut one out and tape it to the artwork?! I don't know AI.
I hope this is a bad joke
great thank you
The need to expand the strokes on the registration mark was new to me. So this is better than just leaving them as strokes?
It's not a requirement, but expanding and uniting them eliminates a lot of weird mistakes from happening
This was a perfect tutorial! 👏🏽👏🏽
Thank you 🙏🏻
thank you man
Awesome! Learning everyday. Thanks Brother.
Hey bro. I use CS5 still. I can figure out why when I draw the line with my pen tool it makes a blue line and starts center and widens as I draw the line. I tried changing the width too and it wont let me change it to .7 inch. Please let me know how to get the black line like you have in the video.
Thanks
thanks man
Thanks!
This tutorials are phenomenal make more of these
Thanks!
Can you please make a video on how to add registration points to your platen?
What brand of shirt are you using for your own brand tees? Thanks
Do you have a tutorial on color separation? Thank you for the clear and easy to follow instructions.
Which transparency paper do you use?
The good stuff 😉
bit.ly/ritefilm
Hey lee, big fan. can you do a video on how and where measurement wise go in an illustrator file?
Good job...I learned something I needed. Thanks!
Personally like to use thinner lines for regs! I feel like it gives the less wiggle room to be off.
I dont like Mac , But what that you were holding ??? AAARGGGG You going to FAST. I'm trying to learn this. All you You tubers arn't explaining too well how to go about it. I Need step by step.
This is every possible step of the process, there's nothing else to explain. Use the pause button each step if you need to move slower
Hey Lee Thank you for all you do! I got thru everything expanded and when I chose "unite" the square fills in black??? I am using a PC and have tried several things with no success. Any suggestions?
just did it a few more time and success!
Okay, I am just getting into screen printing. But I learned WAY more in this 10-minute video about adobe than the first 15 videos I have watched about Adobe. Thank you so much for the help.
Hell yes! Thank you 🙏🏻
How far down from top would you say to put the registration marks.
Really depends on your printer and how close it prints to the edge. Mine is nearly edge to edge so I can place them right to the top of the artboard
Thank you very much. My printer can do 13x19 but never printed anything that size from it. Looks like some test runs. Appreciate the reply. Taking the plunge from vinyl to screen printing. From your videos looks like I'm in for a ride. Keep up the content brother. Awesome to see someone building something out of nothing.
Great tutorial, got my hw done!
Yo this saved my ass today. Thanks dude!
i bumped into your channel by accident when you posted the video of your finished printshop and ive watched you ever since man! my wife says you remind her of me, biz wise and we look similar she says haha! i started my shop a year ago #PRINTLIFE . btw your shop is dope af!! your videos always help even if its just watching someone else that loves printing like myself! ✌ from NC, USA
keep up the dope fucking work Lee Stuart!
Much appreciated dude 🤘🏻
Finally picked up a press after about 2 years of following you and knew where to come for my first print!
Hell ya, good luck 🤘🏻
100
Lee,
Great video! YOU, are definitely my mentor. I have a long way to go, but you are definitely the bench mark.
Very informative tutorial!
Thanks
Thanks man, keep putting in that work
Awesome video. This helps a lot. I am starting to learn screen print, I find it to be a good skill. I am struggling with illustrator (pics to vector, illustrator set up) so these videos help a great deal. You explain everything in detail, each move. Others talk as we know illustrator already. Practice practice practice.. Thanks again.
Thanks a lot man, glad it helps. Good luck with learning illustrator!
Awesome video. And sick shirt 😉
Do you still motovlog at all? Used to love this channel...
If you don't like it now, then leave. Pretty simple
@@leestuart38 I did. Long time ago. Just checked in to see if anything has changed. Unfortunately no.
😂🤦🏻♀️ That’s what I’ve said,
I think you're supposed to fill the registration marks with the registration swatch so they will automatically print on every film color.
You are, but that's something to be explained during color separation since there is more than one route to take
Man I been using + signs for my reg tried your reg Marx today and BAM life became so much easier haha took a 15 sweat suit printed some stuff on it sold it for 125 haha but fr fr appreciate the tutorial
Glad to help my man 👊🏻
This was great! I'm a newbie and this was by far the most thorough and helpful tutorial I've watched! I created my first registration marks thanks to you!
Happy to hear!
Consider on your reg marks to use the reg mark stroke, rather than black. The reason you want to do this is that when you do multi-color/sim process down the road, you don't want to have to make multiple reg marks for all the different colors. It will always print off regardless of what color you use. I hope that makes sense. :) BTW it's in the color pallet that looks like a reg mark.
That's exactly what I do when doing separations, which I'll get into when I make that video
thanks
what black shirts you us
Nice! Do you have videos where you do your chokes and traping? Thanks for sharing
Not yet, but I'll be doing a separations video soon enough
Need a tutorial for photoshop plzzz!!
These will just copy/paste into photoshop
@@leestuart38 I can’t use AI to save my life, idk what it is but whenever I try to make these registration marks on AI I always mess it up
Brillaint, and so easy to follow. Thanks for another great tutorial.
Glad to hear!
went well, I like there was not a bunch of extra stuff.
More please and thank you
Thanks! I'll definitely be getting more out there soon 🤘🏻
Well done... very easy
Really good.
Thanks!
This video was very helpful and I appreciate what you do man!
Glad to help man 👊🏻
Keep these coming!!! Very straight to the point, no filler.
Glad you dig it man 🤘🏻
This was amazing and super informative.
Thanks man. I've got another one similar to this coming out in the next couple weeks, just finished it today 🤘🏻
Your still our hero.
Great video. You're very easy to learn from at least for me. I would love to see more tutorial videos if you have the time.
Hell ya, thanks man. Definitely got some more stuff like this coming
Your platens mate. How do you position your artwork in illustrator to then match up with you grid on your platen? I've got mine set up in a way where it's the same everytime. Be interesting to see how you do yours?
Haha I don't. I just adjust on press, it takes me like a minute to set everything up
@@leestuart38 fair! So your lines on your platen then? how do you lay them out? I've fucked around with mine so many times I'm getting sick of it haha
Whats the advantage of using squares over circles? I saw them in your previous video so I tested them out, but my printers said it was harder to line up. Perhaps they arent as concerned with registration as you are, idk.
They're way easier to line up since everything is a straight line, you can't see if anything is tilted on a circle
@@leestuart38 I suspect they notice when things were unaligned more often and they would rather just not know that its off
Fantastic !! Greetings from Spain !
Thanks man!
Another great educational video.
Thanks man!
That was good. Thanks for the video.
Glad to help man 👊🏻
Great Ai tutorial. More please!
Thanks! We got more coming 🤘🏻
I had been waiting for this one
Glad to get it out 🤘🏻
Thanks! Needed a better mark!
It's great to use, definitely helped me!
good work on the tutorial
Thanks!
💪💪💪💪💪💪💪💪
That was awesome. Thanks
Glad to help 🤘🏻
Great Video dude. 🤘🤘
Thanks man 👊🏻
Thank you bro 🙏🏼
Glad to help 🤘🏻
Hey lee, in your logo LS38. LS means Lee Stuart. What exactly 38 defines? If possible tell us.
I think thats in reference to his other company.
@@jordanb1153 may be 38yrs old?
My other company was actually named after my 38 haha
I've been racing motocross, snowcross and all kinds of other things my whole life, I was a pro rider for a long time. 38 was my number I started with as a kid and I've held onto it in some way through my whole career and now into other things
@@leestuart38 oh ok lee.
Thank you bro
🤘🏻🤘🏻
Best guide ever
👊🏻👊🏻
👍
found it!
Hope it helps 🙌🏻
You did killer! 😎
Thanks man 🙌🏻
@@leestuart38 you're welcome! 😊
Phenomenal job kid! You're an absolute great instructor. How far down do you place your art work on the frame when burning?
Thanks dude! It really depends on the artwork itself, for for the average stuff I place it down about 1/3 of the frame size
@@leestuart38 Thanks for the quick response, stay human....