I did so many hit and miss trips like this. The banter is what makes it interesting. I would be fuming. Both of you are just nice people that make the best of everything.
Building my first bus- so no experience with sealant but I’m digging goop marine caulk. Paintable and uv resistant. Great video highlighting the addictive nature of bus building! But there are a lot of worse things to be into. For example gambling. You gotta know when to hold em know when to fold em. Glad it’s brought the 2 of you together.
Fun Video!! I look forward to seeing what else you two have in the works. With regards to sealant; I've been running a marine repair business for coming up on 12 years now, and one of my most used sealants is 3M 4000 UV. I've used it on all kinds of boat hardware, above and below the waterline. The key with all sealant is to bed the entire surface area of the part, paying special attention to the fasteners. In my opinion, a bead of caulk around the outside edge is worthless. Regardless, the other key to making a lasting seal is cleaning. I prep both surfaces to be sealed like I would do paint prep. Wipe everything down with the strongest solvent that you can without damaging the substrates. Then lightly abrade the surfaces and wipe them down again. Make sure they are completely, and I do mean COMPLETELY, free of any contaminants. And then hit it with solvent one more time just to be sure 😉. Ensure the solvent is completely evaporated before applying sealant. I have used this method on underwater Thru-Hull fittings, hatches, portlight trim rings, deck cleats, etc. I've seen some of these jobs again 10 years later and still zero leaks, and I expect they'll go for many more years. It's a lot of extra work, but it's worth it if you want leak-free connections. Keep the videos coming! Love you guys😘
I have been building mine for year and half just remember take it one day at a time rush work is junk work have fun!!! I use to do commercial security systems 16hr days on ladders in attics id rather build Rigs on my time and you guys are building people future dreams and memories.
Holy cow 😅. After all that, I put my foot down and engage in a reset. Seven hours of sleep, a shower, and a proper meal. BOOM! I can do anything after a proper reset. It is the only thing to stop a tailspin of mistakes like running out of gas 😅
My first bus related purchase yesterday was that same tiny little welder lol. Can't use stick and GMAW is too expensive to justify purchasing a whole unit to raise one roof and weld a few thin odds and ends.
This vehicle has an interference engine and when they upgraded the timing chain or belt they did it wrong and it bent some valves. You have a 50/50 chance when dealing with an interference engine of getting it right if you don't know what you're doing you have to make damn sure you have everything done the right way otherwise you risk screwing it up. Top dead center on the correct compression stroke is the difference between doing it right and screwing up an engine like this
8:19. what a trooper..i packed up the mrs for a run to Boise to look at a dirt bike we made it home the next day driving both ways with the bike;;;nice job chuck...
Use marine grade polyurethane sealer. UV resistant, for use in salt water above or below water line, rated as a 50 year duration. 30% flexible yet very strong, and bonds to most any type of material.
Polyurethane that is used for windshields it lasts a long time I found it seals windows at seals a lot of things little spendy but wow look how long a windshield stays in a car from Factory and does not leak. We're looking into our bus right now been looking at some we're close to you guys well sort of we're in southern Oregon still in the Pacific Northwest we got a lead on a couple we just haven't figured out what one we want what is the 38 but and the other one is a 40 it's good to see Charlie was always following his videos now I follow yours because of his suggestion on his videos you choose you awesome videos keep up the awesome work
I use polyurethane roof and flashing sealant. It was originally designed for sealing the windows on high rise buildings. Which obviously can't all be pulled out and resealed every couple years. I've used it on the roof of our tiny home on wheels. Over 5 years ago. And the sealant is still as soft as it was a year after I used it. And believe me. Our Arizona sun destroys everything, in a fairly short period of time. Except this stuff. At "Home Depot" they call it "Polyurethane Roof and Flashing Sealant". Great stuff!!! I've even repaired leather items. Using it as a glue. And in most cases. It's still going strong years later. That's not what it's designed for though. It adheres to everything I've used it on, without fail. Try it and let me know what you think. By the way, it comes in standard caulking gun tubes. Good Luck Bo Johnson ~Tucson, AZ
@@ChristineJohnston-v5w that stuff sounds solid! I’ll definitely give it a shot, thank you! ..funny when it seems so obvious to just look at projects where the product HAS to be good… i.e. high rise building windows.. hahah love that. Same reason why i often default to marine products :)
he should of called ya and said the motor was toast..thats a rod knock sound to me along with rings and valve job. ..so ya wasted trip..with no coffee..lol
Really??? But being it's California were talking about. I'm sure that they liberal jackass has come up with a completely stupid reason. So what's the excuse they're using???
Interested in one of the sweet Unicorns any of the three available ? And how much? And I'm interested in a solar upgrade on the Sunrader and some modifications ? Chuck knows this rig like the back of his hand. I watched tonight’s live with Chuck and your new post as well, bees bees bees 👍 I would like to talk about purchasing the 7 window U factor bus 🚌 How do you want to go forward on this. I will text Chuck as well 💯👍❤️
Those three and a fourth will be available soon! We are finishing the mechanic work and gutting of the first one for sale.. looking like itll be the collins. Ill tell him to reach out to you, assuming you are the one with his very missed sunrader..
Thanks for your response, I will stay in the loop and when I'm ready let you know. I think I have never missed not even one of Chuck's videos, good content, very talented. The Sunrader another Sweet Unicorn 👍✌️♥️
I WANT TO BUY ONE OF YOUR BUSES! Preferably one that is roomy enough for 3 adults, 1 large dog and 2 cats to live in comfortably. At the moment I am homeless so anything that will hold all of my family would be great. How can I reach either you Brianna or you Chuck?
That's shady as fuck.......the guy KNEW the engine knocked like a mother fucker and the smoke.......should have asked for a video of that thing running . saved you a trip .
The two of you should start an RV business, you 'all know it so well. Use the platform to find out what people want and you got the skills.
I did so many hit and miss trips like this. The banter is what makes it interesting. I would be fuming. Both of you are just nice people that make the best of everything.
So many… always heart breaking.. thank you! Filming was fun, also gave a purpose beyond coming home with the van… so it helped ease the gut punch!
Its great to see that you two are working together!!!
Those pipe flanges from home depot are wild ...😂😂😂
PNW marine industry lives on Sikaflex 291 for absolutely everything and it's been amazing on our skoolie as well. May be worth looking into.
Building my first bus- so no experience with sealant but I’m digging goop marine caulk. Paintable and uv resistant. Great video highlighting the addictive nature of bus building! But there are a lot of worse things to be into. For example gambling. You gotta know when to hold em know when to fold em. Glad it’s brought the 2 of you together.
So addictive! Building just one is harder than eating just one pringle.. 😂
Fun Video!! I look forward to seeing what else you two have in the works.
With regards to sealant; I've been running a marine repair business for coming up on 12 years now, and one of my most used sealants is 3M 4000 UV. I've used it on all kinds of boat hardware, above and below the waterline. The key with all sealant is to bed the entire surface area of the part, paying special attention to the fasteners. In my opinion, a bead of caulk around the outside edge is worthless. Regardless, the other key to making a lasting seal is cleaning. I prep both surfaces to be sealed like I would do paint prep. Wipe everything down with the strongest solvent that you can without damaging the substrates. Then lightly abrade the surfaces and wipe them down again. Make sure they are completely, and I do mean COMPLETELY, free of any contaminants. And then hit it with solvent one more time just to be sure 😉. Ensure the solvent is completely evaporated before applying sealant. I have used this method on underwater Thru-Hull fittings, hatches, portlight trim rings, deck cleats, etc. I've seen some of these jobs again 10 years later and still zero leaks, and I expect they'll go for many more years. It's a lot of extra work, but it's worth it if you want leak-free connections.
Keep the videos coming! Love you guys😘
I have been building mine for year and half just remember take it one day at a time rush work is junk work have fun!!!
I use to do commercial security systems 16hr days on ladders in attics id rather build Rigs on my time and you guys are building people future dreams and memories.
2:02 dicor non sag lap sealant works great for sealing. Chuck introduced me to they're line of products. I love it💯✌️
You two ! :)
Holy cow 😅. After all that, I put my foot down and engage in a reset. Seven hours of sleep, a shower, and a proper meal. BOOM! I can do anything after a proper reset. It is the only thing to stop a tailspin of mistakes like running out of gas 😅
Bump, bump 🎶 🎉👏👏 Love your hard working spirit, and Kiara too of course! Looking forward to seeing what's next beautiful babes! 💞
Awe shucks, thank you! Cant wait to edit the next video!
Dicor leveling and non leveling sealants (depending on your application need). Been using on my motorhome for years and it's the best.
Like driving to see the Grateful Dead, this might be a roadtrip you try to remember ...
My first bus related purchase yesterday was that same tiny little welder lol. Can't use stick and GMAW is too expensive to justify purchasing a whole unit to raise one roof and weld a few thin odds and ends.
"We just need to do the same thing harder." 🤣🤣🤣🤣
This vehicle has an interference engine and when they upgraded the timing chain or belt they did it wrong and it bent some valves. You have a 50/50 chance when dealing with an interference engine of getting it right if you don't know what you're doing you have to make damn sure you have everything done the right way otherwise you risk screwing it up. Top dead center on the correct compression stroke is the difference between doing it right and screwing up an engine like this
good looking cabin,,👍
8:19. what a trooper..i packed up the mrs for a run to Boise to look at a dirt bike we made it home the next day driving both ways with the bike;;;nice job chuck...
Hes is a trooper… so grateful for his willingness to put up with my shenanigans 🙂
Didn’t the seller tell you the engine was funky before you drove there?
First clue!!!
Use marine grade polyurethane sealer. UV resistant, for use in salt water above or below water line, rated as a 50 year duration. 30% flexible yet very strong, and bonds to most any type of material.
50 years sounds too good to be true.. ill have to give it a try!
the engine brake on this unit may be true but thats not the case anymore, the valve actually open when you put your foot on the throttle.
Polyurethane that is used for windshields it lasts a long time I found it seals windows at seals a lot of things little spendy but wow look how long a windshield stays in a car from Factory and does not leak. We're looking into our bus right now been looking at some we're close to you guys well sort of we're in southern Oregon still in the Pacific Northwest we got a lead on a couple we just haven't figured out what one we want what is the 38 but and the other one is a 40 it's good to see Charlie was always following his videos now I follow yours because of his suggestion on his videos you choose you awesome videos keep up the awesome work
I use polyurethane roof and flashing sealant. It was originally designed for sealing the windows on high rise buildings. Which obviously can't all be pulled out and resealed every couple years.
I've used it on the roof of our tiny home on wheels. Over 5 years ago. And the sealant is still as soft as it was a year after I used it. And believe me. Our Arizona sun destroys everything, in a fairly short period of time. Except this stuff.
At "Home Depot" they call it "Polyurethane Roof and Flashing Sealant". Great stuff!!! I've even repaired leather items. Using it as a glue. And in most cases. It's still going strong years later. That's not what it's designed for though. It adheres to everything I've used it on, without fail. Try it and let me know what you think. By the way, it comes in standard caulking gun tubes. Good Luck
Bo Johnson ~Tucson, AZ
@@ChristineJohnston-v5w that stuff sounds solid! I’ll definitely give it a shot, thank you! ..funny when it seems so obvious to just look at projects where the product HAS to be good… i.e. high rise building windows.. hahah love that. Same reason why i often default to marine products :)
he should of called ya and said the motor was toast..thats a rod knock sound to me along with rings and valve job. ..so ya wasted trip..with no coffee..lol
So far the mechanic says it was just algae in the fuel system… they are currently cleaning the injectors… 🤔
@@WolfDogBuses wow ok hope that works.and ya get it..i guess ya could trailer it home if you still want it..thks for sharing...
@@moustachemike7128 yeah itll be interesting… so far im not too confident
just buy a pre 2010 cab over truck. they are so cheap since you cant reg them as commercial in CA any more and build it out
Really??? But being it's California were talking about. I'm sure that they liberal jackass has come up with a completely stupid reason. So what's the excuse they're using???
This was a fun show to watch. Thanks for taking us along.
Whenever you were showing the dash i noticed you were low on gas
I really like the butyl caulk for sealing. It’s a roofing and gutter sealant. Flexible and sticks great. Like butyl tape.
The running out of gas thing is a problem on VW Westy's. Lol
We all have to do it at least once every 10 years!
What a day... sounds like how my days go sometimes !! I am curious about the updates you mentioned at the end of the video.
Ill edit as quick as i can!
Cool Rig!
Oh man, it was probably just a dirty injector! 😊
Buy it! Buy it! Buy it. lmao
Try keeping track of my corral, 40' Scenicruiser, 40' Neoplan, 40' Gillig Phantom, 36' Hawkins, 35' Bluebird, 33' Bluebird pusher, 26' Loadstar 6x6 bus, 6x6 Spartan Expadition rig, 4x4 Ambulance camper, 4x4 Ford camper van, 15 ton crane truck, 8 ton crane trailer, LN Ford 64' crane truck, 45' crane trailer, 44' F700 bucket truck, F350 bucket truck, E350 dump truck, Peterbuilt dump truck, three Land Rover Discoveries, five other assorted rigs, 21 trailers, and 12 assorted boats, motorcycles, trikes and campers.
Love it!
Ran out of gas hahahaha. Seriously that really sucks at 1.30am though. What a great episode!!!
Are your twin busses getting built together???
How's that Chuck for stepping up ~!
And possible head gasket leak..cheers
man, Chuck is TOOO down!
I’m interested in one of the buses you have for sale
Just file it in the big brown file that says S#$! Happens and go on. Lol
File it, and get back on the marketplace scroll lol
Broken valve spring or bent push rod(if it has push rods). That's my guess. I don't think a burnt valve is going to make that noise.
Interested in one of the sweet Unicorns any of the three available ? And how much? And I'm interested in a solar upgrade on the Sunrader and some modifications ? Chuck knows this rig like the back of his hand. I watched tonight’s live with Chuck and your new post as well, bees bees bees 👍 I would like to talk about purchasing the 7 window U factor bus 🚌 How do you want to go forward on this. I will text Chuck as well 💯👍❤️
Those three and a fourth will be available soon! We are finishing the mechanic work and gutting of the first one for sale.. looking like itll be the collins.
Ill tell him to reach out to you, assuming you are the one with his very missed sunrader..
Thanks for your response, I will stay in the loop and when I'm ready let you know. I think I have never missed not even one of Chuck's videos, good content, very talented. The Sunrader another Sweet Unicorn 👍✌️♥️
I edited original response, I really like the 7 window U factor 🚌
"with no RIGard"
marine sealant 5200 is the best there is.
Have either of you ever used Sikaflex before? I’m sure Chuck has used it before.
Absolutely, love that stuff for between seams.. not so fond of the uv rated stuff, ive seen it shrink and detach when used on a roof..
@@WolfDogBuses …. Oh wow that’s not so good. I’ve seen some people use it on their sailboats .
I WANT TO BUY ONE OF YOUR BUSES! Preferably one that is roomy enough for 3 adults, 1 large dog and 2 cats to live in comfortably. At the moment I am homeless so anything that will hold all of my family would be great. How can I reach either you Brianna or you Chuck?
5200 marine caulk
Is Kiara a German shepherd wolf mix?
Malamute mix :)
@@WolfDogBuses Malamute wolf mix! Beautiful mix! :)
I’m looking for a bus but I don’t want to pay a lot neither
Arent we all..
I watch both of you, love the content! But, are ya'll a couple now? Asking for a friend, lol.
Sikaflex
sikaflex?
That's shady as fuck.......the guy KNEW the engine knocked like a mother fucker and the smoke.......should have asked for a video of that thing running . saved you a trip .
Sellers suck! What huge billowing white cloud of smoke, what knocking sound...that's all normal....what? Oh, that's normal.