it's 14 mm negative (standard for airsoft replicas). I think you just unscrew it. But first check for a small grub screw that holds it on/prevents unscrewing). Usually it's on the bottom of the flash hider . It should be on the back/rear end of the flash hider. Hope that helps
yeah, I used an GoPro 3 Hero Black with a standard lence. I'm not sure which "field of view" setting did I use, but yeah... Now I have a new one, so the quality will go up :)
![[UNBOXING] CYMA CM.041SD6 High speed edition](http://i.ytimg.com/vi/F8Ki0lkFRb4/mqdefault.jpg)
great review
Thanks. I couldn't go too indepth, since it wasn't my replica. But the owner has so far reported that it's still working great
Hi, is there possibility to fit 3x 18650 cells to the stock ( 2:40 ), i mean 2 cells in side compartments and 1 in the middle ?
I don't think you can. I'll ask my buddy to measure the side holes on the stock just to be sure
OK; my friend measured the side hole in the stock: the diameter is around 20mm and the depth is about 150mm. I hope this helps
@@AirsoftTipsandReviews soo it should fit, thanks for answer !
Hi, I was wondering if you happened to know the thread size of the muzzle. Also what was the best way of removing it?
it's 14 mm negative (standard for airsoft replicas). I think you just unscrew it. But first check for a small grub screw that holds it on/prevents unscrewing). Usually it's on the bottom of the flash hider . It should be on the back/rear end of the flash hider. Hope that helps
Did you use a fish eye lense for this? Gun looks bent😂
yeah, I used an GoPro 3 Hero Black with a standard lence. I'm not sure which "field of view" setting did I use, but yeah...
Now I have a new one, so the quality will go up
:)