1. )क्या इसे पीएलसी प्रोजेक्ट में टाइमर काउंट डिस्प्ले के रूप में इस्तेमाल कर सकते हैं p 1. 1 में ? अगर हाँ, तो क्या इसके टाइम को हर बार सेट करना पड़ेगा या आखिरी सेट टाइम ही चलेगा ? 2) p 1. 1 में लाइट सप्लाई जाकर दुबारा आती है तब क्या आखिरी समय के आगे से ही काउंटर चलेगा या रिसेट हो जायेगा ?
u r a genius GURU. U saved my power consumption on my construction site and was looking for something to switch off lights in the daytime and it should auto-start in the evening. Thanks for sharing
@@AutomationDude will it hold its last time count when power comes again /trigger input on again ? or reset to zero in P 1.1 ? or i have to put inverter to hold its value ?
I WAS THINKING TO MAKE A CIRCUIT USING OTHER TIMER ic LIKE 555 BUT THIS ONE IS BETTER i need infinite loop for my gardening sprinkler pump after every 8 hours for 2 hours. so if i am not wrong, i haeve to set mode on p-3.2 OP-120 min CL- 360 min LOP- infinite - - - thanks
Very informative video 👍 All of my settings are disturbed in my incubator due to wrong use for which i hv already lost one clutch of turkey eggs. Rollers of turning tray did not move. Kindly tell me how to clear all the saved settings in order to make new settings. Thanks
Brother i need relay which delay current for 6 sec after giving current to equipment. Like i want to on my tv but after 6-10 second when i on the switch. Is there any system available??? Please reply????🙏🏻🙏🏻
bhai ek sawaal hai agar maan lo maine isse 10 ghante ke time par set kiya hai on time and off time to agar bich me power fail hota hai to kya ye dubara se 10 ghante starting se count karega ya jis time par power fail huwa ussi time se continue karega please reply ....
Thank you so much for your love guys..
1. )क्या इसे पीएलसी प्रोजेक्ट में टाइमर काउंट डिस्प्ले के रूप में इस्तेमाल कर सकते हैं p 1. 1 में ? अगर हाँ, तो क्या इसके टाइम को हर बार सेट करना पड़ेगा या आखिरी सेट टाइम ही चलेगा ?
2) p 1. 1 में लाइट सप्लाई जाकर दुबारा आती है तब क्या आखिरी समय के आगे से ही काउंटर चलेगा या रिसेट हो जायेगा ?
Thanks for support!
Very Nice explanation with phase manner.
u r a genius GURU. U saved my power consumption on my construction site and was looking for something to switch off lights in the daytime and it should auto-start in the evening. Thanks for sharing
thank you for the valuable feedback
@@AutomationDude will it hold its last time count when power comes again /trigger input on again ? or reset to zero in P 1.1 ? or i have to put inverter to hold its value ?
@@AutomationDude p 1. 1 में लाइट सप्लाई जाकर दुबारा आती है तब क्या आखिरी समय के आगे से ही काउंटर चलेगा या रिसेट हो जायेगा ?
Nice brother 👍
Thanks ✌️
Absolutely amazing, clear description and exactly what I was looking for. Thanks
Glad it helped!
Awesome, Iska koi 16A variant hai to run motors
That is really good idea bro.. Thanks for video..
Good information ❤
p1.1 mode if i press and hold trigger switch then also it will work on same delay for 2s seconds or it will keep on
Thanks dear, good Job
What is the reverse function of P-4, means I want to continue the cycle till the Trigger on
Bro how to set this for egg Turner motar in incubator?
Can we use this for voltage auto cut off circuit make?
Mera loundry machin hay use es divaisse 20 sekand forward 10 sekand pause 20 sekand rivars aisa sakal chalega kya
Very good.
Very nice & clear explanation video 🙏
Thank you for the support
complete info in understandable way
Thank you keep watching and do subscribe
Excellent Video, Thansk
Doubt: How to reset the existing Programms?
Very Informative kiu k ma apny brooder k fans ki setting kharab kr bytha tha😂😂 btw❤😊
Can we use this relay switch for small time like milliseconds?
Sir nice guide plz give info how it can run dc egg turnner motor
Perfect explanation
Thanks for useful information
One nos mangya hu sir but kya ye pnp photo sencer se triaging ho sakta hai ye
TRY KAR SAKTE HO
Bro can i fix it over my ola scooter charger so that when ot charges after fixed time should be closed
veru usefull vedio sir
thank you brother
How to use it for switch off lights in the day & switch on loghts in the evening automatically??? Would you respond please???
Very helpful video from me five star 🌟🌟🌟🌟🌟
Many many thanks
Can i attach 30amp relay in this module in replacement of 10amp relay? If it is possible, could you please mention how it will work?
Mixer me timer switch jaisa use kar sakte hai kya or price and availability of this circuit
I will not recommend for mixer. Purchase link description mein diya hai
Sir plz connection seeting ?
Thanks for vdo, I want a timer off on ckt of 220 v / 250 watt,how I can use this ckt
Good video
👍👌
इससे कितने एम्पियर का लोड चला सकते है,ये केवल dc के लिये है क्या या ac लोड भी चलेंगे
Can it run 12v dc motor?
100w ya 60w ka bulb jala sakte hai kya is circuit se timing se?
Relay lga kr chahy motor chlaa lo bhai
Laga sakte gain relay to laga hi hai
Sir we have need a setting two multiple channel use as step by step like two bulb...
Muje Yeh taimer me 3 led alag alag timing karni hai tho ho sakti hai?
Ek timer pe ni hai possible
Two blub use kar sakta ha
Sir
Use it's 5kv motor run or not run ?
Plz sir tell me...
Thanks usefully information
good work bro
Hii sir mere pass 2 motor hai 24 hr chalane hai pr 2 ghante mai oo automatically switch honi chahiye mtlb ek band hoke dusri chalu
Can we set this till 1 minute?
Yes
Output current kya hota hai dc ya Ac voltage
Very informative bhai.
Tho iska time 10-12 ghante ke liye set nhin karr sakthe hai bhai!!?
I WAS THINKING TO MAKE A CIRCUIT USING OTHER TIMER ic LIKE 555 BUT THIS ONE IS BETTER
i need infinite loop for my gardening sprinkler pump after every 8 hours for 2 hours.
so if i am not wrong, i haeve to set mode on p-3.2
OP-120 min
CL- 360 min
LOP- infinite - - -
thanks
Great bro
Thanks brother
@AutmationDude hello
❤thanks my use -4
Hello when I trigger timer is on but relay not working
Bro can we use it with dc ?
2 device,, अलग टाईम पे set कर सकते हैं क्या
Nahi
Thank you, does it support 999 secs, 999 minutes 999 hours?
Hello
Nice...
Very informative video 👍
All of my settings are disturbed in my incubator due to wrong use for which i hv already lost one clutch of turkey eggs. Rollers of turning tray did not move. Kindly tell me how to clear all the saved settings in order to make new settings. Thanks
Thank you very much Boss.
ye curcuits kaha se milta hai
Sir wire kaise connection kre es pe video banaye
Trigger na kare huye Continue NC diye to bhi on hoke 3 sec bad relay off hong kya
Great Video. A suggestion to improve. You could have told the use case of each mode(just like the aquarium).
You can use Your 🧠
Thanks sir ji
Welcome
we can use milliseconds...??
I dont think so
hello sir mere pas jo relly timer hai usme 3 push button hai,mai use kaise,set karu,uske sath 12 v k motor pump laga hai
Out ma DC ha ya AC carnit ha
hwo to work triger plz explain a little
Bhai P 1 me power off hone baad bhi program save hi rehta hai ya reset ho jata hai
Brother i need relay which delay current for 6 sec after giving current to equipment.
Like i want to on my tv but after 6-10 second when i on the switch.
Is there any system available??? Please reply????🙏🏻🙏🏻
Actually I set this timmer on 3.2. but I want it on 3.1 program, but now it is not getting in it. Is there any reset function in this
Timer ko kitna voltage power diya hai?
12v
Sir is this possible to add close time 1:30 hour?
Yes....
90 mnts
Required wiring Diagram
Kya hum 5 hour ka timer set Kar sakte hai plz reply
Good
Is circuit me on hone par 3 bar
display blink nahi ho iske liye kuch kar sakte hai
Sir mai bijli strat karne ke bat farst 3 min off rakh na chaha ta hu fer contineu on .
Consa seting sahi hoga..
Sir I want to make aeroplane
But I not enough rupees to buy its products so please help me
Give me subscriber
Relay work nhi kr rha hai
Kya karna hoga
setting dekho proper hai kya.. power supply... or just replace
Kya sarkari school light jaane ke bad fir se program karna padta hai time ke liye
Kya me 12v dc motor on off kar sak ta hu
Yes kar sakte ho
Output common se red cable nikal kar black kaise hoti hai
Inbetween dusra instrument laga hai kya?
50 Watt par chalega ka he
bhai ek sawaal hai agar maan lo maine isse 10 ghante ke time par set kiya hai on time and off time to agar bich me power fail hota hai to kya ye dubara se 10 ghante starting se count karega ya jis time par power fail huwa ussi time se continue karega please reply ....
Hai sir 4hour ke bade chlu 2 chalke band hona
Aher hum yanha motor lgaye to clock wise ,hold ,and anticlock wise kaise set kre?
Hello sir ji
bro इससे डीसी प्रोजेक्ट भी बना सकते हैं क्या या सिर्फ ये Ac डिवाइस को ही चला सकता है
DC bhi bana sakte hai
@@AutomationDude ok thankyou bro
Respected sir welcome give me the tutorial of limit switch connection with xyjo2 timmer (tilting type tray used)
How do I reset the whole setting ? I mean by default settings..? Any option ?
Super I want pcb
check description
Sir my 2 pcs order h kise milega
Bro what is the current rating of this circuit.
What is the maximum current which this circuit can sustain.
10 amps at 250v or 15amps at 120v 20amps at 24v and 25 amps at 12v
Sir
Delay timer same as it hai
Iska display band ho jaata hai pyle koi problem ni thi
Please reply
No idea bro.. replace karwa lo.. maybe display Gaya hoga
पीएलसी प्रोजेक्ट में टाइमर काउंट डिस्प्ले के रूप में इस्तेमाल और दूसरा कुछ डिवाइस ले सकते हैं ?
Bhai agar timer na lagay to koi isu to nai hoga
Sir mujhe har 3 ghante me realy on karni hai 10'second ke liye kon si setting karni hai pls bataye
Kaha par use kroge
Isko auto onn or off kitna time tk set kar sakte hai
❓❓❓
How to reset or default settings all
Setting mili scond me kyese set kre??
Ac bulb laga he uski jagah pe dc moter opret hoga kya
haan.
Iss circuit me 90 minutes off fir 5 minutes on ki setting infinity time ke kaise kare ..?
Bhai hme batana 90 min on rakhna hai 20 min off
P3.2