Hey mate, you job looks so nit, very clean. Well done. I have an old extractor fan in the kitchen but no outside hole and the extractor is build in furniture from 1988 still works yes. I wanna do my self the hole but afraid to damage the wall, what you suggest please ? Thank you and looking forward to hearing from you! Regards, Sorin Romania
Hi there actually are my phone is gone all day and all I want to put a new one. It will be same size and a half and I foot fit in in that again. New one
I'd have sorted the feed out first, so as it ran from the wall socket into the ceiling void and ran down inside the fan trunking, and finished by placing a sealed grommet on the flex hole, for cosmetic reasons.... But a good job none the same.
Thanks Khan. How do you find the strength of this fan? I doubt it can be very good, considering the budget price of this model. I believe its the CHS60?
The magic happenes at 3:45, when a big hole, for the steam duct appears on the wall, out of nowhere. Surely you didn't make that hole and forgot to film the process.
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
Hi Khan, great job. How much will you charge for this job? and where in the UK are you based?
Hi. I m based in oxford.
And how much will you charge for something like this?
You should come to London. Your talented
I m fully booked for next few weeks. U can ask someone to give u the price. Kind regards
Thank you 😊
Hello, did you get this inspected? Because i see from your videos you are a mechanic by trade
Yes am also a handyman too and yes I did get it checked
That wire ruins the look
Yes it need to be inside the trunking
yeah should have put in trunking
Hey mate, you job looks so nit, very clean. Well done. I have an old extractor fan in the kitchen but no outside hole and the extractor is build in furniture from 1988 still works yes. I wanna do my self the hole but afraid to damage the wall, what you suggest please ? Thank you and looking forward to hearing from you!
Regards,
Sorin
Romania
Definitely going to rent a hilti drill with diamond holesaw
That what thought wire should be in chimney part that’s what I’ve done
Hi there actually are my phone is gone all day and all I want to put a new one. It will be same size and a half and I foot fit in in that again. New one
I'd have sorted the feed out first, so as it ran from the wall socket into the ceiling void and ran down inside the fan trunking, and finished by placing a sealed grommet on the flex hole, for cosmetic reasons.... But a good job none the same.
You are welcome thanks
Hi, Ive got a Rangemaster Classic 90 Hood fan and its making a loud banging noise when i put it on? Any suggestions?
Hi, it would be nice if you showed us how to install the vent aswell.
th-cam.com/video/ohnBkEKAaog/w-d-xo.html
Here is the video
@@diykhan thanks
@yolandpillay1295 you can welcome thanks
@@diykhanrrrŕrrŕrrrrrfrfrþffrrrfrŕŕŕŕf❤😅😅řRrþfrRrrŕrrrfrfrfrtþrrrrŕrttþrŕŕtřtþþ😊tt34444444444444444444444444⁴4444444
You didn't show how you connected the electrics, is this something you can show?
That has to be done by a qualified electrician.
Thanks Khan. How do you find the strength of this fan?
I doubt it can be very good, considering the budget price of this model. I believe its the CHS60?
The budget was tight so I just bought what ever was available in the market. Thanks for your support 🙏
Ever heard of tin snips?
No its fine
السلام علیکم کبھی اپنے علاقے کی سیر کروا
Wasalam. Yes why not. Most welcome.
Hi
Can you recommend good extractor kitchen hood
Hi. Where r u based?.
@@diykhan Manchester looking something 60cm wide
@surya2089 www.screwfix.com/p/cooke-lewis-chs60-chimney-hood-stainless-steel-600mm/583fh
@@diykhan thank you is any chance you can come and fit ?
@@surya2089 I m too far from you. Best to find a local guy to do your installation. Good luck 👍
what anout the hole for the cable was it there or you made it?
Hi. I had to make it.
Which extractor are you fitting?
I bought it from toolstation. I think the price was about 90 quid.
The magic happenes at 3:45, when a big hole, for the steam duct appears on the wall, out of nowhere. Surely you didn't make that hole and forgot to film the process.
See what you mean now, that the part I came to find out about.
Great job Khan
pls what is the size of the outlet pipe
150mm
Thanks 👍
Bro take the music out
Good job
You are welcome thanks 😊
Thanks. V helpful
Thanks 😊
are the air flaps only for ducted model or for circulating as well?
They are for both types.
what about the plastc washer for the hole where did you het it because i bought my fan and dosrnt have
@@daron8982 the rubbish washer grommet was bought separately from hardware shop. Yes it didn't come with the hood.
how long did it take ypu to drill the 100mm hole for the ducted hood?
@@daron8982 about 15 minutes
How did you connect the wire?
I left it for an electrician to connect them.
Thank you mate
You are welcome thanks
Thanks 👍
You are welcome thanks
Merci👍
Thanks
Nice and clean ,, made that look simple ,THANKS 👍👌🙏
You are welcome thanks 😊
Hi, I really liked your work…good job. Are you available at the moment? Or fully booked? Thanks
Thanks for your appreciation. At the moment I m fully booked.
Thanks, when you likely to be available? Happy to discuss…
I m not sure when so extremely sorry.
accurate job don
You are welcome thanks
شكرا لك على الشرح المبسط
Excellent video
You are welcome thanks
Hi, will you be able to do that in London?
Hi. Sorry I m fully booked. Kind regards.
Hi I'm from Nigeria interested... electrician.. sorry for jumping into your comment section and searching for job