How to control Pedestrian Crossing Countdown Signal. How to program!. Programming Traffic Controller
ฝัง
- เผยแพร่เมื่อ 28 ส.ค. 2024
- NEW! 6 Chanel
www.iotmug.com...
NEW! 3 Channel
www.iotmug.com...
NEW! 10 Channel
www.iotmug.com...
We added extra features to our board. Now it has button options as of 01/20/2024
you can find same products on our amazon, ebay and etsy.com stores.
Hey everyone, ever wondered how those pedestrian signal countdowns work? You see them at crossings every day, right? Today, we're going to break it down for you.
Inside those countdown signals is a electronic board from the manufacturer. We also have a traffic light controller with six channels, but we only need three for our project. This setup lets us handle up to six lights in the box.
The cool part is the electronic board learns stuff. It watches how long the hand signal flashes and figures out the longest time for the countdown. In our demo, we'll walk you through how it learns and show you the countdown happening for real.
We'll also check out the code we used for this. We'll explain the logic and what the code does. You'll see the device at work as we put the code into the Arduino board.
Oh, and by the way, these devices are made for AC voltages. They're quiet and last a long time. If you have questions or want to know more about how these countdowns work, hit us up. Thanks for hanging out with us, and have an awesome day
my sign has two sets of red blue and white wires what is the config you used for wiring ?
Please check its manual. you should see lines and neutral . you do not need ground for this controller.
@@IOTmug unfortunately it's practically impossible to get the manuals for these devices but I figured it out blue and blue red and red white and white can you flash the hand at the first of the cycle program the counter for the next cycle
Happy to hear@@unmanaged