RUNCAM THUMB PRO GIVEAWAY ON MAKERFIRE facebook.com/MakerfireDrone/photos/gm.1190702574913400/5877055205691283/ or BUY IT HERE ON MY AFFILIATED LINK AND KEY IN SHOGUNEMPEROR for 5% discount shop.makerfire.com/products/runcam-thumb-pro-4k-camera-16g?_pos=1&_sid=e6932ef28&_ss=r&aff=399
Aaww pleasure bruddah!!! Im really glad its of help. I was struggling to find vids on this and got so pissed i decided to do it myself! Hahahha thanks for the support and do remember to sub bruh!!
@@BIRDYFPV130 pleasure bruh! But i would actually recommend u spending abit more for the GO3S. Built in stabilisation and true 4K@30fps. I had more issues with this thumb pro that i’d like to count. 😝
- Hi, thanks for the video, it's very useful, but I'm satisfied with the standard camera, and I had a problem, there was a chip on the lens, tell me which lens to order, or the name of the standard lens?
Thanks for dropping in bruh. Yeah, just order the same standard lens if they have it available. Stupid thing is that their lenses are not all the same size.
Hi i have a strange question with the thumb pro on recording it split the file into two files. The first file was good and normal but the second file was zoomed in. I was recording on 1080p 120fps with shutter 1/240. Any help would be great
haha no question is strange bruddah. Ok, so here's how it works. The camera records with gyrodata and that is what the 2nd file is for. So the 2nd file is for Iwhen u use gyroflow, it is kinda zoomed in cause it fixes the shakes and oscillations coming from your drone by zooming it in and fixing that shake. Does that make sense to you? Im not sure if Im explaining it properly. Its normal for cameras that supports gyroflow and does not have built in stabilization or hypersmooth.
@@shogunemperor thanks for the reply but this is raw footage straight from the camera i had a 12min flight and the file was split into two 6 min flight files. It suppied the gyrodaya files with it. The second 6 min flight file was zoomed in compared to the first 6 min file. Thanks again mate
OMG im sorry to say there isnt any bruddah. This is the most annoying thing about runcam. They NEVER sell replacement parts and its been years and still nothing. One of the reason i had to use a caddx lens for this mod.
@@shogunemperor it's not a matter of the length, it's the barrel width, they're like 10mm while the first one is 12 which seems to be a common size. I've only found a couple 10mm lenses anywhere and they're like special order.
@@shogunemperor I wonder if it might be possible just to change the mount on it to 12mm. I think the electronics maybe won't allow it, but I guess I could just put it on with glue...I think the hard part might be getting the old one off.
Oh its my pleasure bruddah!!!! You can try this:- rotorvillage.ca/runcam-thumb-pro-adjustable-mount/ or if you have a 3D printer then its this one im using:- www.thingiverse.com/thing:5798667
YES BRO!!! I know!! I didnt want to have anything printed. So its an easy mod. Hell i can have the whole case printed.. but then it would be whole camera mod you see? Just simple easy mods for those without 3D printers.
Do you by any chance which Lens this is in their official shop on their website? They have a very disorganised product page for replacement lenses.. ^^ I am looking for a new Lens that will work with the v2 Version since I cracked mine and there has been a black spot in my footage for too long now :D I would really appreciate any help (: I have NO Idea which Version would fit and I do not even see a 1.8mm Lens for the Turtle v2 just two 2.1mm ones.. For Polar 2.1mm Lens for Ratel 2\Nebula pro\DJI For Polar Nano/ Nebula Pro Nano For Baby Ratel V2/ Ant/Avatar 1s lite 2.1mm Lens for Ratel V1\Turtle V2 2.1mm Lens for Loris micro 1.66mm Lens for Ratel V1 2.1mm Lens for Nebula Nano 1.8mm Lens for Loris Nano 7G Lens for Kangaroo 7G Lens for Tarsier V1/V2 7G Lens for Baby Ratel V1 7G Lens for Baby Turtle/Whoop 1.66mm Lens for SDR2 Race 2.1mm Lens for EOS2 2.1mm Lens for Kangaroo F2 Replacement Lens 2.1mm Lens for Turtle V2 2.1mm Lens for Turbo S1/Turbo SDR2 x M12 1.8mm Lens for Ratel mini 1.8mm Lens for Kangaroo
@@shogunemperor Then I will probably just get the 1.8mm Kangaroo one and just hope for the best that the Threads will fit.. ^^ I will look into that more closely later again and decide.. but thanks for the reply anyway! :)
@@shogunemperor sweet. i thnk just upgraing the lens to a 1.8 is just a better idea since it gives more information to work with the videos without to much crop.
RUNCAM THUMB PRO GIVEAWAY ON MAKERFIRE
facebook.com/MakerfireDrone/photos/gm.1190702574913400/5877055205691283/
or
BUY IT HERE ON MY AFFILIATED LINK AND KEY IN SHOGUNEMPEROR for 5% discount
shop.makerfire.com/products/runcam-thumb-pro-4k-camera-16g?_pos=1&_sid=e6932ef28&_ss=r&aff=399
Thank you so much for making this video! It's just what I really needed!
Aaww pleasure bruddah!!! Im really glad its of help. I was struggling to find vids on this and got so pissed i decided to do it myself! Hahahha thanks for the support and do remember to sub bruh!!
This is really cool thanks a lot 😊
If possible please share the link for the TPU holder
Thank you
Aaww thanks my man!! Much appreciated. Yes of course!! This is the one Im using
www.thingiverse.com/thing:5575748
Thanks man that’s makes me want one now
@@BIRDYFPV130 pleasure bruh! But i would actually recommend u spending abit more for the GO3S. Built in stabilisation and true 4K@30fps. I had more issues with this thumb pro that i’d like to count. 😝
@ cheers for the heads up there too mate. Much respect and all points adhered
@ Always a pleasure bruddah! RESPECT back at ya!! *thumps chest have an awesome week my man
Subbed too ha ha ha
@ aawww thanks for the love bruh!!! Subbed back!!!! 👊😘
- Hi, thanks for the video, it's very useful, but I'm satisfied with the standard camera, and I had a problem, there was a chip on the lens, tell me which lens to order, or the name of the standard lens?
Thanks for dropping in bruh. Yeah, just order the same standard lens if they have it available. Stupid thing is that their lenses are not all the same size.
Hi i have a strange question with the thumb pro on recording it split the file into two files. The first file was good and normal but the second file was zoomed in. I was recording on 1080p 120fps with shutter 1/240. Any help would be great
haha no question is strange bruddah. Ok, so here's how it works. The camera records with gyrodata and that is what the 2nd file is for. So the 2nd file is for Iwhen u use gyroflow, it is kinda zoomed in cause it fixes the shakes and oscillations coming from your drone by zooming it in and fixing that shake. Does that make sense to you? Im not sure if Im explaining it properly. Its normal for cameras that supports gyroflow and does not have built in stabilization or hypersmooth.
@@shogunemperor thanks for the reply but this is raw footage straight from the camera i had a 12min flight and the file was split into two 6 min flight files. It suppied the gyrodaya files with it. The second 6 min flight file was zoomed in compared to the first 6 min file. Thanks again mate
Anyone know a replacement for the runcam pro wide? it's like an m10 mount? vs this which is m12, you can't find a lot of lenses that will fit it.
OMG im sorry to say there isnt any bruddah. This is the most annoying thing about runcam. They NEVER sell replacement parts and its been years and still nothing. One of the reason i had to use a caddx lens for this mod.
@@shogunemperor I emailed them, they sold me a replacement mobo and lens combo for $70 before.
@@maddercat oh niiiiiiiiiice!!! Lucky u man! Did u try contacting them again? Most of the other lens may not work as it maybe too long
@@shogunemperor it's not a matter of the length, it's the barrel width, they're like 10mm while the first one is 12 which seems to be a common size. I've only found a couple 10mm lenses anywhere and they're like special order.
@@shogunemperor I wonder if it might be possible just to change the mount on it to 12mm. I think the electronics maybe won't allow it, but I guess I could just put it on with glue...I think the hard part might be getting the old one off.
Just wondering if this lens mod would affect the original lens profile for this camera in gyroflow?
so far so good on my end. Although in this flight I didnt use gyroflow.
Thats some crazy fish eye from that lens
Yeah. Pretty good. But im not sure about the effects on the video tho.. seems likey thumb pro is grainier than most
Thanks for the lens mod video! Where can I get a camera mount like you are using?
Oh its my pleasure bruddah!!!! You can try this:-
rotorvillage.ca/runcam-thumb-pro-adjustable-mount/
or if you have a 3D printer then its this one im using:-
www.thingiverse.com/thing:5798667
nice video and nice flight ❣
aaww thanks my man! Much appreciated. Hope u have an awesome 2023!!
Are the lenses m12 threaded?
Yes bro, M12
@@shogunemperor thanks,couldn't find the info anywhere
@@kwooook pleasure bruddah! Oh! Sorry i ddint mention it in the video! My bad
Hi Bro, there is a spacer at print 3D for this lens RC18G 😉
YES BRO!!! I know!! I didnt want to have anything printed. So its an easy mod. Hell i can have the whole case printed.. but then it would be whole camera mod you see? Just simple easy mods for those without 3D printers.
@@shogunemperor Yes, I have print the spacer, it's nice for filtre ND now, perfect camera good price. 👍
@@onclefly8450 nice bro
@@onclefly8450 do you have a link for that?
Hi @ONCLEFY , Where can I find the stl of the spacer? I would like to try it myself. Thanks!
Do you by any chance which Lens this is in their official shop on their website? They have a very disorganised product page for replacement lenses.. ^^
I am looking for a new Lens that will work with the v2 Version since I cracked mine and there has been a black spot in my footage for too long now :D
I would really appreciate any help (:
I have NO Idea which Version would fit and I do not even see a 1.8mm Lens for the Turtle v2 just two 2.1mm ones..
For Polar
2.1mm Lens for Ratel 2\Nebula pro\DJI
For Polar Nano/ Nebula Pro Nano
For Baby Ratel V2/ Ant/Avatar 1s lite
2.1mm Lens for Ratel V1\Turtle V2
2.1mm Lens for Loris micro
1.66mm Lens for Ratel V1
2.1mm Lens for Nebula Nano
1.8mm Lens for Loris Nano
7G Lens for Kangaroo
7G Lens for Tarsier V1/V2
7G Lens for Baby Ratel V1
7G Lens for Baby Turtle/Whoop
1.66mm Lens for SDR2 Race
2.1mm Lens for EOS2
2.1mm Lens for Kangaroo
F2 Replacement Lens
2.1mm Lens for Turtle V2
2.1mm Lens for Turbo S1/Turbo SDR2 x M12
1.8mm Lens for Ratel mini
1.8mm Lens for Kangaroo
Oooooh!!! Im sorry bruddah.. theres a high chance the 1.8mm is no longer available. I havent tested the other 1.8mm lens yet…
@@shogunemperor Then I will probably just get the 1.8mm Kangaroo one and just hope for the best that the Threads will fit.. ^^
I will look into that more closely later again and decide.. but thanks for the reply anyway! :)
@@Nupid_Stoob Im so sorry im not of much help bruh. I really feel u on this one!!! Good luck!!!
Hi@@Nupid_Stoob ! i cracked my v2 also. just wondering did you bought the 1.8mm Kangaroo to replace it already? will it fit?
@@Nupid_Stoob Hi 👋 Did you replace the lens ? Which one is fit? Thanks
Very cool thanks for sharing 👍
Aye, its my pleasure bruddah! Hope it was helpful.
Hi, are these moded lenses ir blocked or ir sensitive lenses?
They are usually IR blocked. But some are IR sensitive. So really have to check the specs on the individual lens. But these are IR blocked.
Oh interesting
I struggled with this cam for awhile!
Mantap paman 👍🏼
Makasih brudder!!!! Harap semua aman di sana!!
By chance does this work on the regular ThumbCam? or just the Pro?
Sorry bruddah, this ones just the PRO cause it has the clip on ND filters. I think u can use the RC18G for the thumb.
@@shogunemperor sweet. i thnk just upgraing the lens to a 1.8 is just a better idea since it gives more information to work with the videos without to much crop.
my pleasure bruh!!! Yeah, I hear you man. Good luck with the project!!!
Puddles.. Puddles everywhere...
yeah man!!! Its been raining non stop for days!! OH OH OH!!! I love your tik tok video!!! The rain one!! hahahah
niceee subs
Aaww thanks bruh! Much appreciated. Subbed back!