Big Auto Water - Deep River!! How to install drum pump suck water from Big River for Big Farms.
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2022
- Auto Water - Deep River!! How to install drum pump suck water from Big River for Big Farms.
= = = = = = = = =
Please subscribe to channel Bit.ly/2Avx3VQ
Follow Facebook Page: / learnforlifechannel
= = = = = = = = =
If you have any suggestion or comment please drop a comment below the video,
#sphonromRiver #siphon #PumpWithoutElectricity
![[Full] 4 ต่อ 4 Celebrity EP.876 | 5 พ.ค. 67 | one31](http://i.ytimg.com/vi/m6eKqTfpx0g/mqdefault.jpg)
In the end, there are very few life skills that matter in life and make a difference. None of those skills are thought in the westen societies. Hat of to your work, brother, amazing. Thank you for sharing. Peace and love from Europe!
It is wonderful, it helps a lot of farmers who will watch your video. Thanks man.
It is very helfull for those in the remote area that there is no electrical power supply keep up the good work
You teach science with excitement it is helping thousand of farmers. Thanks lot
Thanks for the video it was so helpful for me to save money on my farm.
I suggest if you could put mesh filter on the pipe that go's in the water for the safety of small fish or any other river animals.
A joke, river is higher than end of the out pot pipe😂
Just enough a pipe to get water under gravity
Very creative and innovative video. God bless you and thank you for sharing your God-given talent.
Man! Tks for sharing this technology. It will help many people around the world
Amazing auto water!
Best regards
👏👏✌️🙏✌️👏👏
Thank you for sure your idea good job we appreciate it thank you brother in my current handy you never know when you going to need it thank you for sharing to the whole world you're a good man
Wow,, excellent 👌 very good ideas 💡
Thanks for sharing,,
Never stop thinking sir, for you were born for great things.
Wow wonderful, it worked, I will try this to my fish pool at my farm, thanks yours content is very helpful ❤
Is not fake this video? Is possible?
Use the big welding gas cylinder. This is incredible. It is an excellent development you are sharing today. WOW !!!
good idea
Awesome idea
Ee
@@jumaadabubakar4572 Also visit 'dunia kreatif' channel for much simpler tank but same idea.
L
Amazing. Thank you for sharing.
Your so very creative sir, job well done, thank you so much for showing us your invention, god bless you sir,
Great successful experiment !
The outlet pipe size assisted with gravity created high vaccum which the intake pipe unable to compensate, the result is high sucking power.
Since the outlet deliver full 60mm capacity the vacuum power deformed the metal drum. Maybe can control the volume of water going out by installing a ball-valve at the end of the delivery pipe, to balance the input and output so that the drum will not deform.
sir... good day.. so this system is true? that the outlet pipe is higher than the inlet?
@@kwaknitl-2guide318 i don't think so. if it's higher, it will not flow continuously and eventually stop when the strength required to suction the water from the river and the strength of the gravitational pull in the output pipe become balanced, as the volume of water in the drum decreases the water flow going out decreases also little by little until it will eventually stop.
Hii Bhai i want to order it can you help me to get it and please tell the prize also how much
@@jaymarbreguera591 if the water did not keep going into the barrel the barrel would keep bending, so it has already sartopped, it is bringing in the same amount of water as is fgoing out, it is a simple siphon nothing fancy, it just looks fancy design, you could do the same thing with 2 valves and a tee and a cap and pipe, valve on each end to hold the water in the pipe and fill the pipe at the tee and then cap the tee when full and two people open the two together and you have a siphon
@@butchs2337 Yes you can.
But the barrel adds two benefits: no foot valve (here plastic bag) is needed in he river. No need to take any bath. Secondly, if there is a minor air leak in the system, a barrel can accumulate some air and make this siphin running for a longer period.
Thank you so much for your kind valuable sharing your ideas to the subscribers and it will be helpful to our farmers 👍
Thank you so much sir for sharing your knowledge
So the worlds energy problem can be solved by this! Pumping up water for free. This man deserves the Noble prize!!!
Seen one demo before,but it's quite costly,yours is quite or lot easier to follow up on, thanks 🙏
Even cheaper: simply use a tube or a stiff tube.
Thank you for sharing your knowledge Sir!
what he did was right.
because, the end of the outlet pipe is lower than the water source (river). so surely the water will flow smoothly. look at 15:20. it is very clear that the output is lower than the source
Interesting.. Thank you for sharing the process.
Brilliant idea brother. I can apply it in our rice field now. Thank you so much and keep going brother.
Me also brother❤❤
..that is we called syfone system here in Philippines. That naturally socking the intake pipe because the output is lower than the water level. even they have no drum that is still working.
Really a brilliant idea.
Your video can give an idea to the people have'nt enough money to buy generator specialy in asian country..thank you so mich..God bless.
Great Job my friend. Thank you very much. Good luck.
Water reserved in the drum is the one that flows not the suction from the river. Elevation factor plays a huge role for this system.
yeap i agree it is just a simple siphon system
If it was that the water in the drum ready finish
The water out of the drum is running more then 10 mn
The water out of drum is creating a lot of vacuum to suck from the lake.
@@rusanyukaare179 Water is not elevated. It is transferred. Suction produced by long deliver pipe which has holding capacity more than 200 ltr. So the suction is very simple and the system is truly working
Awesome man thanks, where are you around
Thank you and this will help me to our rice field.
Very good idea brother 👍👍. Thanks for creatif water fump manual.. i am very like.. 👍👍
I'm asking if it is always necessary to use a drum instead of other materials such as a tank made of bricks and cement. And also, why not we can't use an open material like a box? Thank you.
This is a siphon. You may use a single tube or hose. The only purpose of the barrel is to make it easier to get the siphon started. The whole system must be airtight.
Thank you for sharing your experience with us. Please don’t worry about what others say I think it is very good of you. God bless you ❤
You9😅😊😊
TO THE MAKER OF THIS VIDEO:
The water level in de river or canal is clearly much higher than the ground level of the field. Can you please give us the difference in of the water height relative to ground level
I agree on you.
It is just a fancy looking syphon. He said he wanted to save money, so all he needed was pipe, check valve at the input, with a tee at the highest point in elevation the pipe has to travel in order to go over the dam from the river to the field, it will syphon once you get it primed.
Better yet, if he wants to really save money all he needed was a shovel. The river is clearly higher than the field.
@@TheRebelmanone you are right, please show us without the outlet going so far down.
@@TheRebelmanone you may make it even simpler. Close the output. Fill the tube from the top and dip the suction pipe into the river. If the grater part of the tubing is below the water level in the river, you do not need any foot valve at the suction end. A smal drum can be practical for starting this siphon.
Como se llama la música de fondo es buena música avisame por favor GRACIAS
Prachtig idee , eenvoudig en zeer praktisch. probeer het voor mijn mijn vijvertje te maken.
God Bless you, bro, you a wonderful knolenge,
Thanks for sharing the video. I want the list of items for me to buy and install one in my garden.
Thank you very much for sharing
Da best vloger no#1
Gracias por la enseñanza,cusco Perú
Bro so much effort 😊 only single pipe can do this 😅 everyone know water comes from higher place to lower place
Very.good.job.wonderfull.idiea.thanks.for.you.i.wish.you.bright.future
do not deny it my friend. it's a siphon. it's true that the drum is higher but the out put end of the pipe is obviously lower than the river.
you are right, he should not let the outlet so far down the field
Very good Information
Very good technology
Nice bro im every proud of you. By the way ill try in my rice farm someday.
My friend you are super great. Thanks for open sourcing your works. God bless.
Does your upright tubes create more presure?
No, it is just for filling the system.
Good job my friend watching here frm Philippines
Excellent, superb work. Simple but works!👍🏽
@Learn for Future Question, how long does it last? until the water is emptied from the barrel, or one hour, two hours?
If the flows are equal, it lasts indefinitely. This implies pipes with the same diameter at the inlet into the barrel and at the outlet. There is another issue related to suction depth. The weight of the suction water should be equal to that of the discharged (outflowing) water. If the flow rate of discharged (outflowing) water is higher over time, the barrel is emptied and siphoning no longer occurs. A non-return damper and a sorb are required on the suction (in water) The flow rates can also be adjusted from the tap on the outlet. A barrel water level indicator (made of a transparent tube (glass, polycarbonate, etc.) with bottom and top connections to the barrel would be ideal to precisely adjust the suction and discharge flows (outlet)
You are a innovator man
El tambor se puede llenar hasta por debajo de la entrada del agua para que así exista mayor presión de succión y las llaves de arriba cerradas! Al aperturar la salida el agua tratara de salir y producirá un vacío que es la que lógicamente succiona el agua pero todo en la parte superior siempre tiene que estar bien hermético para que no se pierda el vacío y logré funcionar!
Bego
No es ni necesario el tambor metálico, colocando solo el tubo ya funciona, a eso se le conoce como principio de sifón, el agua circulara a través de la tubería mientras el nivel del agua de donde se succiona sea mas alto que la salida de agua del tubo.
Man I highly recommend wearing safety glasses when using a grinder I've had to go to the ER & have a peice of metal removed from my eye it sucks!
Done ✅ my dear friend ❤️ God bless you 🙏🏾
Another good one. Udon says hello. Mike
Will this system pump to a higher destination? For instance, from a lake to a storage tank at the top of a hill?
No! It is a siphon. No siphon can lift water.
It worked because the water output is lower than the intake.
The idea is to pump water from a lower point to a higher point.
Try to drop the barrel past the valve, it's a higher point than the intake.
If water comes out, then your pump works.
This is a facy siphon with a priming barrel. A siphon can not lift any water. Output must be lower than input for this to work.
@@kjellg6532 Water is not elevated. It is transferred. Suction produced by long deliver pipe which has holding capacity more than 200 ltr. So the suction is very simple and the system is truly working
@@kkselvakumar3110 I agree on that. Only wated to piont out that this system workd fine if and only if the water level in the river is higher than the outlet to the field. Many YT videos clame that this is a pump and can lift water ‚from a deep well‘. That is not possible. Suction is produced by the difference in height between the outlett and the top of the drum, not from the length or volume of the delivery pipe. If you doubble the length of the delivery, the water flow will be a little less due to more friction in the delivery.
@@kjellg6532kau bodoh sekali,,, air mengalir bukan pengaruh tinggi rendah sumber air,, tetapi air mengalir karena daya hisap/ vakum dari drumm,, terlihat drumm memiliki perubahan pisik
Man one of our old man used same technology to get the water out of 120 meter deep bore... Its simple suction technique ... The water decrease from tank create a suxtion effect and the input pipe suckout the water where ever it find ...
Thank you for your vedio now I have a knowledge...God bless.
Яшавор гап йук ;молатци;
Appreciate your work the genius
Good idea, but i think the source of water is higher than your field maybe you can just use gravity system through pipe, less cost for materials, but your project still good idea for every one
it will stop !! soon air will be in the system !!
Very good my friends, thanks
Thank u so much bro I'm from srilanka
الماء نفس المستوى تقريبا فى الجانبين
Hello, this system you created attracted my attention and inspired me. I want to make this system to draw water from a pond. There are some questions I would like to ask regarding this matter;
First: Is there any harm in using a spring check valve in the suction line?
Second: Is it okay if I use pushvit sleeve for pipe connections?
Third: Is it possible if I connect this system to the inlet of a water ram pump and feed the water ram?
Thanks in advance!
thank you for this brilliant work...i will try this soon
You are amazing man...
Thank's your video....I'm interest yours idea and I want a question,: what's high suction (h1) and high discharge (h2) from water surface....?
This is a siphon. You may use a hose instead. Input source must be higher than output, as with any siphon.
Thank you Sir for sharing the idea..God Bless
Good brother. Cambodia 🇰🇭 can work this 😊
Very good idea brother 👍 👌 🙏
2:24 good job nice idea
Hi Friend
Thank you for your time but I am a bit confused on why you need all these. Simply the input water level is higher then the output level hence a straight tube will do the job. As you have done you need to fill the tube for the first time.
This setup will never work if the out put water level is higher then the input.
If all you want to do is pull water over the hill/burm into the other water source then you don't need the tank.
Just pick your size pipe and put a ball valve on the outlet side then submerge the pipe to fill it, close the ball vale and carry the outlet side over the hill/burm.
Now all you have to do is open the ball vale and water will continue to flow.
It's a siphon just like you had but without the barrow/stand.
Water leaving the pipe creates a vacuum on the inlet side.
It is simply volume displacement.
Your barrow crushed because you were closing off the intake while the outlet was still displacing volume.
I think the collaps of the barrel is theatre. The plasic bags closing thevfilling studs, they hold!
@@Dingsrud The theatre is they don't need a barrel.
This works like a pump if you need to draw water higher then the sourse and outlet, but clearly this is not needed here.
@@icicicles A barrel may be practical to prime the siphon. One do not need any foot valve and no need to take a bath in the river to remove any plastic bag at the suction side. An alternativ is to suck the whole tube in water to get it filled with water.
This set up is a siphon with a starting barrel, it is not a pump. No siphon can lift water to a higher level. Water level in source usr be higher than discharge to the field.
@@Dingsrud Ya I probably shouldn't have used the word pump even though I expressed it like a pump, still wrong.
Water does seek its own level so the outlet would have to be below the source.
Apppp0pppppàÀaaai00aa0l@EQ
Does it work uphill or downstream or flat land
Great experiment. No matter what people may say it's an excellent information 👍. God bless you 🙏
Learn for Future: I would kindly appreciate it very much if you would respond to my comments. I have build the system exactly as you explain in the videos but it does not work. Is it possible that we exchange ideas to find out why it does not work? Thanking you kindly in advance
I did the same thing
1. Fill up as much water as possible, force the air out from the drum/barrel we are using. (both side inlet and outlet should be air sealed while u r doing this)
2. When the water overflows from that two vertical pipe, air sealed it. (Tips: I would suggest using 4 valve for all the holes, easier to operate and make a bigger hole at the bottom of the drum with an extra valve to clean the wastage that sucked in from inlet pipe, make it big so ur hand had access into it for cleaning or dealing with cloaking problems in the future. Do not use netting at inlet hole as it will cloak it as soon as some leafs being pulled over)
3. At the end of the outlet, open it up and let it run for couple second to create stronger vacuum in the drum. ( the drum deformed when he leaves the water running for too long time, but strong vacuum suction was created as well)
4. Open up the inlet and ur water will be running smoothly as they are filled with water without air in the inlet pipe, it makes the suctions stronger.
*Just remember one thing, short inlet and longer outlet, just make sure no air running in from the outlet, then this system will work just fine, so valve is super useful. If the pipes are filled with water in the outlet before opening up, it will be fine. But if u let some air into the outlet pipe, this system will fail.
Try it couple times to get the right vacuum suction u need, as different length of inlet pipe and quantity of airs going back into the drum do affects the vacuum power needed to make this work.
Good luck!
Assalom aleykum men bu kursatuvni Janubiy Koreyadan tomosho qilayabman uzimni millatim UZBEK.Uzbekistonga borsam menham shunday vakkumli pompa yasashim kerak Alloh nasib qilsa ingliz tilini bilmayman lekin sizga habar yozayotganimdan hursandman juda Uzbekistonda katta katta unumdor yerlar kop lekin sugorish uchun suv kamroq bizda dengiz okeanlar yoq salomat buling habaringizni kutaman
@@AustinAhxinn input water level must be higher than output water level. it is a siphon and nothing else. Let the guy simply tell us the height of the water inlet level relative to the water outlet level. That is all we need to hear from him. he does not say ANYTHING about that. WHY?
@@stevesilos4402 is basic of siphon. But some people tried it even with higher input and lower output still failes. The details in between matters
@@AustinAhxinn details in between ??? I have build an air tight system. Filled it with water. inlet pipe also completely filled. Opened the outlet valve and you know what happened all of the time? Every time air is sucked at the outlet valve back into the drum.
how much high pumped water field than pond? height distance between two ends.
Zero! No siphon can pump water up!
Please mention how much down feet on wards u can did this from ground level and hole diameters of pipes inlet , outlet and air pipes in every discrption boxes...
gracias amigo me acabas de dar una gran idea saludos desde colombia
Chúc mừng bạn thành công .❤❤
Thanks alot bro have learned. Will try
This is Very helpful, thank you for sharing. Maybe we will use a smaller pipe
so that sa drum will not deform. We will use water for dishwashing or taking a bath
Smaller pipe will not help. One must reduce the height difference between inlet and outlett.
Amazing job my friend! 👏🏻👏🏻👏🏻👌🏻👌🏻🤙🏻🤙🏻🇺🇸 Thanks for sharing!
Question, how long does it last? until the water is emptied from the barrel, or one hour, two hours?
If the water level in the river is higher than the outlet to the field and all plumbing is air tight, it will run for months, maybe more.
Good Job 👍
Can we use plastic drum?
Good Job Man ❤
МО ЛО ДЕЦ !!!, КАРАСИВО ПРЕМЕНИЛ ЗАПЕРТЫЙ В ЗАМКНУТОМ ПРОСТРАНСТВЕ ОБЪЁМ ВОДЫ.
подписка, лайк.
Good knowledge,,,can that idea used to draw water from a borehole,,??
You must reduce the flow of water going out so that the container will not be damage or at the time you open the exhausting valve dont delay also to open the intake passages of water.
For this SIPHON to work, the water level in the river must be higher than the exit to the field. Then you start with opening at the high end, in the river. You may take a rest, drink a cup of the and then open the output. As for collapse of the steel barrel, strange that the plastic bags at the filling studs are holding. Is he making a theatre?
good job my brother..thanks you
It deformed because you open the outlet valve while the inlet( the pipe in the lake) was still blocked, I do understand why you did that but check valve at the end would have prevented it.
❤how long the flow stay?
Bro you are legend
Great job
You need a pressure gauge to check sucking pressure and dual intake and you will pump harder the weight of the fall causes the sucking pressure. By increasing the diameter of your outflow pipe you cause more vac suction as you want more volume increase and it goes on and on if you keep raising your barell you can pump further and more volume
All wrong my friend. Water only flows down.
@@seetheforest so trees move water up how , with a man made pump ? Water loves water ...
@@Alex-um4fe no one knows, it's a mystery.
The suction tube is same diameter as the output. No need to waste any money on dual intake. With the output at the center of the drum, half of the barrel volume are not active! With a priming drum there is no need to jump into the river, just theatre.
There is no need for closing the inlet in the river. If you do, you should open in he river before opening the output to prevent air from sucking in from the output.
@@Alex-um4fe so magic barrel pumps work on the same principal as trees?
we just convert it with concrete tank i think. if possible right?
You need a stronger tank. I did a test with a twenty ltr plastic container and garden hose. It sucked a bucket dry in less than a minute 👍 the container collapsed a little from the vacuum 🧐🤩👍
Please tell me after you opened the output pipe....you opened the intake pipe directly without a wait or wait a couple second....because as I understand if you open the intake one late and the water in the drum empty then it wil not work.
Simply open in the river first. Then you can open the output some time later in the day.