Rye I think you spend some time with the side detailing of cars it doesn't need to be a fully custom air channel just vents and air channeling because one stretched out vent doesn't match the detail with the rest of the car.
I actually did custom stuff a few times on the side (in other design timelapses) but deleted the footage as the body is too janky to do what I want in the time I want. But if I use the body again I'll definitely try to use something totally custom!
this engine is bad it has 7.5% efficiency, it super expensive, it has no torque at low rpm and very bad power curve. it all most explodes at it peak power.
I absolutely love boxer engines because they get some crazy power even though they can have relatively small displacement. Best engine for an all around car, they can be a bit expensive though
@@Ferrari255GTO great for handling too. And the boxer 6 pot is one of the only engine that is perfectly balanced using no counterweights or balance shafts. I think v12s are that way too but don't qoute me there lol
you snapped a brake line or something?? how does one even add performance brake calipers to there car anyway?? i want to know since im trying to do the same to my next car...
Visionär is a rather good way to name a concept car since its easy to see it means Visionary (in both Swedish and German too), and the hybrid its emulating is basically the Koenigsegg Regera, but with gears and a heckin' lot more grip from the looks of things :P It seems to me that this vehicle would, in real life, have a combination of a massive motor running through a gear reducer acting as a starter and torque booster on the engine itself, while it would also have two motors driving the front wheels capable of enough regen braking to make the wheels begin to slide upon braking. Likewise the engine's booster motor would provide massive engine braking too via regen to recover power, or otherwise recharge the battery pack when cruising. I like it, like, a lot.
@@skyhylands I have like half of the mind needed to be one, that is the practical and ideation side of it, however my academic performance in the field is quite shoddy as proven by my failure to even get close to putting that iron ring on my finger. I have no true ability at maths :P
cop: you were going 175mph on a 50mph zone rye: im sorry sir i had to go 175 so that I could turn or else i'd ruin the donut shop sir sounds and looks smashing. nice car edit: 4:58 you can pronounce it as bo-lead
hello. i just wanna say that I think that your a good creator. I love your videos and wonder, How? I can't join the discord but im working on a hyper car that has a 7L Twin turbro V10. but anyways nice job!
It can't turn because it's 4000 pounds! That's about like a full size sedan or midsize SUV. Anything that handles well is under 3000. Super cars are routinely around 2000. Put that thing on a diet for the facelift version.
I was trying to get in between a heavy gas supercar (Bugatti Chiron is 4000ish) and a Rimac Nevera (4750ish) :P but in the V2 version it for sure may be lighter :D
Supercars are closer to 3000+ a svj adventador is 3600lbs and a gt500 is over 4k lbs hell even a p1 is over 3k. “anything that handles well is under 3000” is laughably wrong
I'm a little late to watching this, but you know what Trize (a part of our group) made a 1424hp 3 cylinder video..... months ago.... so it wasn't held by forgotten mustard, and you didn't make a record :P
drive.google.com/file/d/1BR6m4j8zu6R8rQ2i8GoQctN4LKREwP0Z/view?usp=sharing Here is a link for the beamng mod, inside the beamng mod there is an automation .car file
@@TwinTurBros after tuning ran a lap of 1:56.615 almost hit the wall on last turn before the finish line lost precious seconds believe i can get a low 1:4 second time i uploaded the run on my page.
Fun challenge for u To make a car with out automation complaining and for it to have good brakes but not to good but not to bad and good steering but not to good off steering but not terrible steering (if u know how to make them good lol)
JOIN THE DISCORD TO ENTER IN THE DESIGN CHALLENGE!!
discord.gg/3ttFqBKpSq
No, I don't think I will.
Rye I think you spend some time with the side detailing of cars it doesn't need to be a fully custom air channel just vents and air channeling because one stretched out vent doesn't match the detail with the rest of the car.
I actually did custom stuff a few times on the side (in other design timelapses) but deleted the footage as the body is too janky to do what I want in the time I want.
But if I use the body again I'll definitely try to use something totally custom!
@@TwinTurBros oof
1400hp out of a 3 cylinder?! I could hardly squeeze that much out of a v8 in the game 🤣
this engine is bad it has 7.5%
efficiency, it super expensive, it has no torque at low rpm and very bad power curve. it all most explodes at it peak power.
It's definitely a meme engine xD
I made a v8 do 3000hp lol
I absolutely love boxer engines because they get some crazy power even though they can have relatively small displacement. Best engine for an all around car, they can be a bit expensive though
@@Ferrari255GTO great for handling too. And the boxer 6 pot is one of the only engine that is perfectly balanced using no counterweights or balance shafts. I think v12s are that way too but don't qoute me there lol
The car actually sounds supercharged to me. LOL
It's either the trans or the electric motors
@Ray David maybe
@@TwinJag374he said it is a mix of I. DR and some other l3 engine
You nailed the design on this one! I also loved the custom sound, it was music to my ears xD
Good job!
Rye: AWD
Also Rye: put RWD
Pretty sure the whole point was petrol rwd and electric fwd.
I changed it back to AWD when I hoped into beamng :P
Koenigsegg: "WRIGHT THAT DOWN!"
Been a minute. Was trying to install some performance brakes on my integra today and sprung a leak in the system, so I needed this
you snapped a brake line or something?? how does one even add performance brake calipers to there car anyway?? i want to know since im trying to do the same to my next car...
@@iammyworstenemy3807 better stopping power
6:10 *SHIT'S ABOUT TO GET REAL!!!*
I would absolutely LOVE to see this happen XD
Visionär is a rather good way to name a concept car since its easy to see it means Visionary (in both Swedish and German too), and the hybrid its emulating is basically the Koenigsegg Regera, but with gears and a heckin' lot more grip from the looks of things :P
It seems to me that this vehicle would, in real life, have a combination of a massive motor running through a gear reducer acting as a starter and torque booster on the engine itself, while it would also have two motors driving the front wheels capable of enough regen braking to make the wheels begin to slide upon braking. Likewise the engine's booster motor would provide massive engine braking too via regen to recover power, or otherwise recharge the battery pack when cruising. I like it, like, a lot.
I have a feeling you're an engineer lol
@@skyhylands I have like half of the mind needed to be one, that is the practical and ideation side of it, however my academic performance in the field is quite shoddy as proven by my failure to even get close to putting that iron ring on my finger. I have no true ability at maths :P
Twin TurBros: * builds a 1400 horsepower 3-cyl *
koenigsegg gemera: *hold my fucking fwd hypercar*
Me: listens to Twin TurBros talk about gaping holes with no context
Nice work, my guy.
I'm amazed at what is possible with an I3 engine and a body with zero drag. Btw the design you did looks very cool!
cop: you were going 175mph on a 50mph zone
rye: im sorry sir i had to go 175 so that I could turn or else i'd ruin the donut shop sir
sounds and looks smashing. nice car
edit: 4:58 you can pronounce it as bo-lead
This car looks gorgeous
1:17 THAT'S ME!!!
8:44 Man.. those door jambs are a bit too close for a car that long.
Besides that, it looks amazing
perfect car concept bugatti bolide
finally! a Lamborghini asterion competitor!
Very strong koenigsegg vibes it gives...
You beat the system
I love this channel
19:13 Just casually goinh at 450kms
19:16
WARP MODE ENGAGED
Yet another banger from ryan
Beautiful koenigsegg jesko
Early I love your vids
Ferrari at the front, and Lexus LFA at the back and BMW exhausts
dam that be quicker than a tesla roadster
It's a hybrid alright! A hybrid between super car, big ass truck, and a jetliner.
Looks like a lykan hypersport crossed with a jesko
when I saw the thumbnail I was like, *gasp* "no way"
I need to be The Stig and set lap times in these awesome cars
you probably need a channel to even post your lap times
Nice
hello. i just wanna say that I think that your a good creator. I love your videos and wonder, How? I can't join the discord but im working on a hyper car that has a 7L Twin turbro V10. but anyways nice job!
Looks a lot like your other super car that you made for the track. Can’t remember the name tho, will update when I get the name
Edit: Magnus Auska
Sounds like a car from watchdogs legion
Im having troubles with this body, the chassis sticks out in the front, how did you solve it?
You have the option to hide the chassis in automation (in the open alpha. BUT back then what i did was modify beamng files to hide it there!
4:33 says awd but it clearly says rwd. Kinda pissed me off lmao
It can't turn because it's 4000 pounds! That's about like a full size sedan or midsize SUV. Anything that handles well is under 3000. Super cars are routinely around 2000. Put that thing on a diet for the facelift version.
I was trying to get in between a heavy gas supercar (Bugatti Chiron is 4000ish) and a Rimac Nevera (4750ish) :P
but in the V2 version it for sure may be lighter :D
Supercars are closer to 3000+ a svj adventador is 3600lbs and a gt500 is over 4k lbs hell even a p1 is over 3k. “anything that handles well is under 3000” is laughably wrong
Bugatti Body, Zenvo styling lol
he kept saying "p shape" i think triangular would have been a better description, also it makes me want to think it's some kind of Pagani
How did you get the daytime running lights to light up
It's the koenigsegg gemera!!!
(Engine wise anyway)
I'm a little late to watching this, but you know what Trize (a part of our group) made a 1424hp 3 cylinder video..... months ago.... so it wasn't held by forgotten mustard, and you didn't make a record :P
That feeling when the video doesn't pop up when you search for it.
But I do stand corrected!
@@TwinTurBros :P I never saw his video, but I just know he's basically the one making all the records
I still have the overall record... R-right!?
@@TwinTurBros ....
Hay Ryan want country is from?
Irl there is actually a V3 twin turbo in a huracan that can got 1400horse power
My favorite thing to do is to make as much power from sub 1 liter 3 and 4cylinders
Kristian von koenigsegg is typing..
Ferrari sf19 stradale + some kind of mclaren= front and then rear is zenvo tsr-s and you have koenigsegg jesko spoiler
Exactly! Pretty much sums up my inspiration
Looks like a Koenigsegg Jesko
Make a v16 12k rpm Supercar
He can even make it rev it higher than 12k by modding the files
But the v16 engine type isn't the best power/weight wise but still a cool idea
I wish I had a pc so i could play this with beamng (Insert sad pepe)
Make the a insane race car with no rules and try to beat the northshlifle record
Wtf is "the a insane" i need to go back to school 😂
Do the supra 2jz engine
I don’t understand English and you ask how do you write in English, I’ll tell you that this is a translator
Can you make a crash after your trials?
Why did you put a licence plate from Spain?
Gran Turismo Vacuum cleaner car
I would send in my car design if I had a PC ☹️
4:57 you can pronounce it as "bo-leid"
Why did u stop taking 1/4 mile times?
I actually forgot xD,
After I posted it was thought "awh man!" To myself xD
i like the car.........i want the .car file for Automation to fix the rear wing coming off at 350+ mph
drive.google.com/file/d/1BR6m4j8zu6R8rQ2i8GoQctN4LKREwP0Z/view?usp=sharing
Here is a link for the beamng mod, inside the beamng mod there is an automation .car file
@@TwinTurBros after tuning ran a lap of 1:56.615 almost hit the wall on last turn before the finish line lost precious seconds believe i can get a low 1:4 second time i uploaded the run on my page.
Koenigsegg already made one, you are way behind dude!
would it be cool if I modeled a car like this in blender? I'd consider
That would be awesome!!
Sadly my blender skills are sub par at best xD
@@TwinTurBros I love to model and hhave some good time in it. Id totally do it, sadly I have something else to work on rn. If i had refs id do it
"Boogardy"
Tyre diameter is a bit too large tbh.
Fun challenge for u
To make a car with out automation complaining and for it to have good brakes but not to good but not to bad and good steering but not to good off steering but not terrible steering (if u know how to make them good lol)
Early gang
But he clicked RWD not AWD…
Also it's pronounced bol-eead
so does every person who plays this game cheat?
E
E
The sad part is that my Bentley has more PS and a higher top speed
this is illegal
How? Really 😑