Yooooo! I was just watching "Everyday Home Repairs" doing a video about a bathroom remodel and they seriously threw your name out as the best person on TH-cam to teach you about drywall! I'm so proud! 😭😭😭 You've made it to the big time, Pal! You come highly recommended to others who didn't know who you were and I'm so proud of you! 😭😭❤️
Another tip that goes along with the cleanup process (as it has to do with how to leave the mud overnight - or longer). If I wipe down the sides of the bucket as you've shown, I can pour a layer of water over the mud and I don't have to worry about drying out the top layer and/or promoting crusties. The next day, I can pour off the excess and the mud will have been kept in good shape. Easier that than fighting the lid when the mud is not going to long term storage.
Good show. I like scrubby sponges and steel wool for cleaning. Hot water helps to get old crud loose. Let steel tools dry on a piece of cardboard, make sure they don't touch.
I do a lot of remodeling, framing, tiling, stucco, flooring, casing, etc.. But what I don't do a lot of is DRYWALL. However, it's inevitable that there is ALWAYS a drywall patch that needs to be repaired, comes with the territory. I have been watching your videos for a while. Today I was doing a ceiling patch, and the entire time I kept catching myself say, "feather them edges, feather them edges." LMAO. I was VERY impressed with how much I have learned from you and how much better I have become. Still a work in progress, but thanks to you, I'm on the right path.
I keep a grout sponge instead of the brush.. It's the go to for cleaning pan and tools and inside mud bucket.. and also good for sanding a small edge here and there, and the edge on corner beads if need. The more broken in the better
My go-to is a toilet brush; they're made to get in corners and I like starting jobs with immaculate tools. The best friend is the 5 gallon bucket of water for both mud or piant tools - especially brushes and scraped rollers, soaking does most of the work for you. The mud bucket cleanup I call "parking" your mud. NOTHING is more IRRITATING than boogers in your mud (then on wall)! For spackling, try this: pour water in it and dump it out just before putting the lid on. It keeps it like new.
The best thing I ever did for making my occasional drywall projects more enjoyable, was replacing anything carbon steel, with stainless steel when possible😎
@@719vol I find drywall left on aluminum does get a rust build up if not cleaned decently or scraped I feel this comment meant. The old mud box for pulling tapes my dad had got pretty crappy and a rough surface of we didn't clean it well.
12:54 Good opportunity to caution about reaching into a bucket like that, can really slice up your hand on a stray knife or trowel that you didn't know was in there.
Ha ! I have a 6" knife I've had for 10 years , most people would toss it but I always go to it when making small repairs and it is sharper than a razor , it has laid my hand open more than once
For the bottom of the water bucket mud, I usually pour the water into another bucket until I get to the mud. When I open a box of mud, I keep the plastic empty bag and put it back in the box and use that as a garbage bucket. I'll take the left over mud from bottom of bucket and scrape it into mud garbage box
The long handle brush is OK, but a short handle brush (like the kitchen scrub brush that IKEA sells for a buck or two) is easier to use and is easy to get into the nooks and crannies of your pan and tools, expecially mixing paddles.
Hi Ben awesome video very educational there's a lot of great tips and don't worry about dumping the mud in the toilet that's the least of our worries we all do it like you said just water it down and another tip as a professional drywall taper for 12 years I usually leave all my automatic Taping Tools in buckets of water not even clean but I use the leftover bags from the mud boxes to cover my tools even my buckets of mud instead of the lids then when they get too dirty I shoot them out and use a new bag of empty mud great video from DC taping Niagara Falls Ontario
Hey Ben I have really enjoyed you taping videos. I usually wash my tools using the garden hose when available. Then I have clean buckets of H2O for my next start. I also love seeing my Most Precious Wife’s face when I use the top tray of the dishwasher for cleaning my tools. Wishing you and your family a Merry Christmas and a Blessed New Year!
As soon as I found out stainless steel mud knives existed I immediately purchased them. One of the best decisions I've made after wasting money on rusted out carbon/blue steel blades. It's always cheaper to buy the right tool first than to constantly grow away cheapo tools.
Me either. Love doing it around the house though. About to start taping a bunch of uneven butt joints that never received tape or mud when they manufactured the mobile home. They just attempted to cover the joints with this thin trim
I also use a plastic tire brush for cleaning the tools. And I keep a large damp sponge near my work area to wipe the "crusties" onto, to wipe off the edge of the knives/trowel. The sponge works as well if not better for cleaning up at the end of the day. And I use the handles in the box of compound like a drying rack for the knives. I always learn something from your videos though, I almost didn't watch this one but glad I did!
Great videos and a lot of help for us non pros. One comment about flushing down the toilet. Don’t do if the site is on a septic system. I would recommend covering it and taking it elsewhere. Thanks again for all the work you do making these.
Personnaly, when I'm done mixing and I want to clean the paddle, I swirl it around in the water until most of the mud has come off. By varying the rotation speed and giving it a few bursts, I can get it almost perfectly clean without even touching it. The little that remains is then scraped off by hand.
Hi Ben. Haven't used the carbon steel, however, I have switched to all stainless steel and I'm super glad I made that decision. I use Hyde products and so far, no complaints. Couldn't disagree with anything you said on the video. Not that I ever do🤣🤣. Good to see ya again. Hope you and the fam are doing well.
@@stevensko9153 Yeah. I own two Level5 knives and they're awesome. Very sturdy. However the flex is a bit compromised on Level5 because well, they are well made. Whereas, Hyde provides a little bit more flexibility when using the knife. It helps me achieve an easier feathered-edge when adding pressure to one side. I've only been drywallin for about a year so I go for whatever makes my job easier 🤣. I learned everything from Ben. He's my teacher.
5 gal bucket of water with a sponge or brush......especially for rapid set, keep em clean in between coats....a long handlenylon brush works well with a sponge.....I never let them even dry with mud still on them....one bucket for cleaning gets set up at the start
When scraping off the “crusties” while cleaning you can put it back in to the mud bucket? Wouldn’t they just be in the mud the next time you use it? Or does it break down after you mix it up?
I never do. It's extremely rare that I'll put any mud back in the bucket once I take it out, even if it looks clean. Mud's cheap - not worth dealing with hitchhikers.
I use a similar cleaning method though I do it slightly differently; I use a medium stiff brush for plaster and joint compounds while using a stiff bristle brush for stucco and concrete cleaning. I use a dip, brush, dip method which seems to work fast and well; I also will keep towels in the vehicle for drying off tools before putting them away though if they’re going to get used the same day of next day I tend to not dry them as I use exclusively stainless and magnesium tools exclusively. I also keep smaller nylon and copper bristle brushes in my kit for getting the smaller areas but typically a putty knife will get things off. My trowels store on magnetic strips while most of my trowels live in a home made stand as I have dozens in different sizes from 1” through 14” and includes flexible to firm blades and scrapers. While I will keep paddles in water most of the time if I don’t or just with some materials I’ll let the paddle sit and get hard then just knock things off which has worked OK for me for years. Thankfully I don’t do as much mud/stucco work as I used to as it can be tougher than the more skill less work side of things like cabinetry and finish work.
OMG you just gave me the greatest idea! Thank you so much. I am a stucco guy and I have a truck with a great storage lockers for the tools, but the trowels always seem to fall off. I have a magneted knife strip that we can't put anywhere in our kitchen so it just stored away. I am going to go mount that in my tool locker and the trowels won't fall over anymore. Thanks for the tip, I'm so happy now BTW the best thing I like about taping is how easy the mud cleans off the tools compared to my stucco tools. Sand and cement and all the other mud we use for stucco is tough on hand tools. WD-40 is the only help
@@Phazetic99: No problem; I actually use 2 $5 magnet strips from Harbor Freight, 1 on top and 1 on bottom which holds the trowels fine and they can actually overlap so you can fit more side to side. I have numerous tools and will actually drop a trowel in my sponge bucket to soften up while I use a spare; with a stiff bristle brush I usually don’t have an issue cleaning them but occasionally stuff stick and I just let it set them knock out off with a wood chisel. Though WD-40 and green scotchbright is my go-to to deal with rusty spots. I have a small shop and have always had to be creative to fit everything in.
I keep a small hose with a twist nozzle in my truck. I am OCD and so as soon as I am done I scrape everything then hit it all with the hose before it dries on. It gets into all the cracks and small spaces better then any brush. The key is the drying even with the aluminum and stainless.
@Steven Ticino- what kind of a truck do you drive?! I've driven around with a hose n nozzle in my trunk too but I don't have a water source on-board to spray my tools.
Ah, cleaning the sides of my bucket. Wow, did I get eyes rolling when I would do that! What can I say I didn’t have trouble with dried mud in the bucket. Thanks for a nice instructive video.
An old tile setter would always have a bucket with a couple shovels of gravel in his clean bucket. Stick the drill in there and spin the mixer: instant clean.
Do you have a preference on a magnesium hawk or aluminum. I don't care for aluminum as it's likely I have always used magnesium. My buddy for the DeWalt with the black coating on it, really enjoyed that too. Is there a video for metal filing or "machining" the edge of the Hawks back to straight edges as the trowel makes wear paterns in the edges.
I bought a plastic rectangular bucket made for window washing squeegees at lowes to keep my knives, pan, tape, and a jab saw in. My biggest knife is a 12”.
In another video, Ben demonstrates the box he built ages ago (sort of like a lightweight knife block you'd see with a kitchen knife set-except with a carrying handle). If I recall, he also shows how he built version 2.0 of it. Does a great job protecting everything while also making it all quick access. Best wishes!
Thank you for the info! What can I do to save my mud bucket that has dried mud on the sides above the rest of the mud without getting crumbs in my mud?
let's talk about putting things down drains. i was sanding dried multipurpose mud texture on a ceiling in a small bathroom. over the 30 minute or so job i got thickly covered in dust. and as i sweat it all got quite gummy. almost like a glue consistency. not wanting that in my shower drain. i had the wife hose me off in the back yard. was i over-worrying? would that have been ok to send down the drain? - keeping in mind we have a septic system, not city sewer. enjoying the videos! keep up the great and very helpful work!
Question for Vancouver carpenter or anyone that can answer. Imagine a recessed joint running across a wall. Mid sheet we have a butt joint/factory edge running up from the floor until it meets the recessed/beveled seam. Is the correct way to mud up the beveled seam and stop or mud "though " it stopping at the top of the beveled edge ?
Still cant find a pan with rubber bottom grip. Tried “after market” rubberized magnet meant for the pan and it worked for about .7 seconds. Is that a particular brand that you got? It looks like it stays put very well. Great vid by the way. Essential! Cleaning is about routine. I clean my gear every time. Got used to it and works like a charm. Also how you store/carry your tools is a key as well. Thanks Ben. 👊
@@jerseyjim9092 I tried Husky from HD and some blue perforated one (don’t remember brand) from Lowe’s and both failed miserably right away. Same symptom like your goldblatt. Lets wait and see if Ben will chime in. 👀
Learning a lot from your channel, have a 1900 home in the US do you know if I can sand the old plaster walls smooth? They have years of over painting over and over and not to good of smooth plastering over the years as well. What it be good to cut all that down with sanding? Plaster not breaking or peeling anywhere, ceiling where replaced just not sidewalls. Hope you have time to reply thank you and love the channel really 😁😎
I just did this on some very jagged and pointy plaster walls in a bathroom, I sanded down the walls with 40 grit paper on a 5” random orbit sander and shop vac, it worked surprisingly well and quickly. Then I skim coated it with all purpose joint compound to help smooth out the walls
While working I have a spray bottle with water and paper towels. So easy to spray and wipe. When finished all tools are cleaned to being spotless. It only takes a few minutes There's no other way for me. I am really confused that this is a popular question? It's kinda implied that if you want a smooth wall you need clean knives and crumb free spackle.
For me It seems If you don’t wipe everything off quickly at least with an old towel they will show signs of rust eventually even the stainless stuff don’t matter.
Try soaking you carbon knives in vinegar for a bit. If it isn't a poor grade of steel that should prevent them from rusting as fast or at all depending on the amount of time they are exposed to moisture.
Hoping for some HELP! My question is, 'Do I use Peel Stop before I use drywall patch or patch and then use the Peel Stop'. Please advise. I have plaster walls in a 1940s home. ALL the paint peeled off the outside walls when I was prepping to paint. I could not get all the layers off and am left with paint ridges. Planning to patch to feather and smooth out. Sanding is not an option on such thick areas. My question is, 'Do I use Peel Stop before I use drywall patch or patch and then use the Peel Stop'. Please advise.
My dad and I did a job and forgot a pail of water with a carbon 3" knife it. When we came back a year later to this shop for more work we found it. It was pitch black and not really smooth anymore lol
Is it possible to remove cured hot mud from a plastic bucket? Already banged out the big chunks with a mallet but it still has residual mud stuck to the bucket. only 1/16” thick layer of mud.
Is that non slip tape on the underside of ur pan? How is it on ur hand? It seems like it’s be really abrasive. Btw, love the channel, thank u for sharing!
Unless your trial is non-magnetic stainless steel will it will corrode because non-magnetic stainless steel is what they use them kitchen entry and it doesn't have no car but magnetic stainless steel has carbon in it to check it take a magnet to it
Got me a 40+ year old pan. Sometimes it gets cleaned right away, sometimes not cleaned until the next use. If I weren't lazy all tools would be cleaned immediately, but, well....
Hey Ben, do you do hourly contracting work that we can hire you to help us fix a couple of minor paint/drywall related deficiencies? We are also located in Vancouver, BC. Thanks!
Just leave your tools so home owners see them , next morning they will be clean 90% of the time. I like to see them pat themselves on the back. I agree scrape when done then scrap before you start. Scrap down inside of mud bucket. Mix mud next day, most important is the blade, mud on the handle not going to make a difference, nothing is harder to do after a bunch of mudding, sitting there and polishing your tools?
One of my stainless steel putty knife was rusty after I leave it in water for a day.I came back clean after I use some wd-40,I google says even stainless steel can rust if you don't maintain it well😕
When I can't muster motivation to properly cleanup, I seal stainless tools into a half empty mud bucket. Nothing dries out, then clean at the end of the project. It's also a 'fun' way to misplace your tools- clear buckets please!
I finally switched to all SS tools. Break in is a bit of a bear tho. At least with carbon u can break them in quickly with sandpaper. I’ve managed to break in some of my SS tools by scraping painted walls. 🤷♂️. Anyone know a better way to break in a SS too kid love to hear it. Thanks
I find the best way to keep our tools clean is to leave early and let my partner deal with it. It saves me a ton of work.
Murphy's Law!
🤣🤣🤣
Hahaha!
Made me laugh out loud
Hahaha good one
Yooooo! I was just watching "Everyday Home Repairs" doing a video about a bathroom remodel and they seriously threw your name out as the best person on TH-cam to teach you about drywall! I'm so proud! 😭😭😭 You've made it to the big time, Pal! You come highly recommended to others who didn't know who you were and I'm so proud of you! 😭😭❤️
Thnak you!!!!!
Another tip that goes along with the cleanup process (as it has to do with how to leave the mud overnight - or longer). If I wipe down the sides of the bucket as you've shown, I can pour a layer of water over the mud and I don't have to worry about drying out the top layer and/or promoting crusties. The next day, I can pour off the excess and the mud will have been kept in good shape. Easier that than fighting the lid when the mud is not going to long term storage.
Good show. I like scrubby sponges and steel wool for cleaning. Hot water helps to get old crud loose. Let steel tools dry on a piece of cardboard, make sure they don't touch.
I do a lot of remodeling, framing, tiling, stucco, flooring, casing, etc.. But what I don't do a lot of is DRYWALL. However, it's inevitable that there is ALWAYS a drywall patch that needs to be repaired, comes with the territory. I have been watching your videos for a while. Today I was doing a ceiling patch, and the entire time I kept catching myself say, "feather them edges, feather them edges." LMAO. I was VERY impressed with how much I have learned from you and how much better I have become. Still a work in progress, but thanks to you, I'm on the right path.
I keep a grout sponge instead of the brush.. It's the go to for cleaning pan and tools and inside mud bucket.. and also good for sanding a small edge here and there, and the edge on corner beads if need. The more broken in the better
My go-to is a toilet brush; they're made to get in corners and I like starting jobs with immaculate tools. The best friend is the 5 gallon bucket of water for both mud or piant tools - especially brushes and scraped rollers, soaking does most of the work for you. The mud bucket cleanup I call "parking" your mud. NOTHING is more IRRITATING than boogers in your mud (then on wall)!
For spackling, try this: pour water in it and dump it out just before putting the lid on. It keeps it like new.
@@garychandler4296 Thanks for the toilet brush idea!
The best thing I ever did for making my occasional drywall projects more enjoyable, was replacing anything carbon steel, with stainless steel when possible😎
100000%
Mud is super corrosive too, so normal tools will get obliterated if you leave almost any on there
I got rust stains in my dry mud with a cheap steel trowel. I bought the stainless trowel the next day!
@@EricLS gypsum is corrosive? You sure it’s not the water in the mud?
@@719vol I find drywall left on aluminum does get a rust build up if not cleaned decently or scraped I feel this comment meant. The old mud box for pulling tapes my dad had got pretty crappy and a rough surface of we didn't clean it well.
@@Matt-my7pz agreed. S/s does and can rust. Was just wondering if it’s the water or the gypsum that is causing the corrosion.
12:54 Good opportunity to caution about reaching into a bucket like that, can really slice up your hand on a stray knife or trowel that you didn't know was in there.
Ha ! I have a 6" knife I've had for 10 years , most people would toss it but I always go to it when making small repairs and it is sharper than a razor , it has laid my hand open more than once
For the bottom of the water bucket mud, I usually pour the water into another bucket until I get to the mud. When I open a box of mud, I keep the plastic empty bag and put it back in the box and use that as a garbage bucket. I'll take the left over mud from bottom of bucket and scrape it into mud garbage box
same
Perfect idea, thanks!!!
I use the green scotch -brite scour pads for cleaning my tools , pan , and bucket of mud . It really works the best
I’m watching this after I just cleaned my mudding tools like I haven’t been doing this for over a decade 🙄 lol thanks for all the content Ben.
Yes, always clean tools right after use, never wait until the next day! Love your attitude!
I use an old dishwasher brush for cleaning, really gets into the nooks & crannies
The long handle brush is OK, but a short handle brush (like the kitchen scrub brush that IKEA sells for a buck or two) is easier to use and is easy to get into the nooks and crannies of your pan and tools, expecially mixing paddles.
Try a toilet brush or bottle brush and thank me latter
@V C - Why does the length of a brush handle affect how well it works to clean nooks and crannies?
Same, have many of them around !
The small sponges that have scrub pad on 1 side are excellent as well.
thanks for psoting !
Lmao, ditto!
@@bethanyanderson1745 same reason a short handle brush works best in the kitchen, doesn't get in the way of your wrist and stores easier.
Hi Ben awesome video very educational there's a lot of great tips and don't worry about dumping the mud in the toilet that's the least of our worries we all do it like you said just water it down and another tip as a professional drywall taper for 12 years I usually leave all my automatic Taping Tools in buckets of water not even clean but I use the leftover bags from the mud boxes to cover my tools even my buckets of mud instead of the lids then when they get too dirty I shoot them out and use a new bag of empty mud great video from DC taping Niagara Falls Ontario
Hey Ben I have really enjoyed you taping videos. I usually wash my tools using the garden hose when available. Then I have clean buckets of H2O for my next start. I also love seeing my Most Precious Wife’s face when I use the top tray of the dishwasher for cleaning my tools. Wishing you and your family a Merry Christmas and a Blessed New Year!
As soon as I found out stainless steel mud knives existed I immediately purchased them. One of the best decisions I've made after wasting money on rusted out carbon/blue steel blades. It's always cheaper to buy the right tool first than to constantly grow away cheapo tools.
Same. I was ecstatic when I realized I could get stainless steel.
Bought stainless tools the first time and still have them many years later.
Blue steel isn't supposed to be cheapo, it's supposed to be superior because it's more flexible.
I do this for a living and I promise carbon/blue steel is way nicer. Just dry them off after cleaning and you won’t have any problems.
@@bretmarty5902 Seriously.
I'm definitely guilty of spending too much time keeping tools clean. I'd never make it as a paid drywaller.
right lol
Ha, ha,
Me either. Love doing it around the house though. About to start taping a bunch of uneven butt joints that never received tape or mud when they manufactured the mobile home. They just attempted to cover the joints with this thin trim
Use a sponge. It works better and quicker than you think, also uses a lot less water. Reminds me, I got a bunch of stuff to clean now.
I also use a plastic tire brush for cleaning the tools. And I keep a large damp sponge near my work area to wipe the "crusties" onto, to wipe off the edge of the knives/trowel. The sponge works as well if not better for cleaning up at the end of the day. And I use the handles in the box of compound like a drying rack for the knives. I always learn something from your videos though, I almost didn't watch this one but glad I did!
Great videos and a lot of help for us non pros. One comment about flushing down the toilet. Don’t do if the site is on a septic system. I would recommend covering it and taking it elsewhere. Thanks again for all the work you do making these.
Great tips thank you. I need a stiff bristled brush now lol.
If you put dish soap in your mud do your tools become self cleaning?
Personnaly, when I'm done mixing and I want to clean the paddle, I swirl it around in the water until most of the mud has come off. By varying the rotation speed and giving it a few bursts, I can get it almost perfectly clean without even touching it. The little that remains is then scraped off by hand.
i always take my tools outside and wash them off with the nozzle set to jet cleans everything perfectly in a couple minutes
I dig the skateboard grip tape on the mud pan. All awesome videos by the way. Thanks for sharing.
Hi Ben. Haven't used the carbon steel, however, I have switched to all stainless steel and I'm super glad I made that decision. I use Hyde products and so far, no complaints. Couldn't disagree with anything you said on the video. Not that I ever do🤣🤣. Good to see ya again. Hope you and the fam are doing well.
We are well. Thank you Cindy!!!
@@stevensko9153 Yeah. I own two Level5 knives and they're awesome. Very sturdy. However the flex is a bit compromised on Level5 because well, they are well made. Whereas, Hyde provides a little bit more flexibility when using the knife. It helps me achieve an easier feathered-edge when adding pressure to one side. I've only been drywallin for about a year so I go for whatever makes my job easier 🤣. I learned everything from Ben. He's my teacher.
5 gal bucket of water with a sponge or brush......especially for rapid set, keep em clean in between coats....a long handlenylon brush works well with a sponge.....I never let them even dry with mud still on them....one bucket for cleaning gets set up at the start
When scraping off the “crusties” while cleaning you can put it back in to the mud bucket? Wouldn’t they just be in the mud the next time you use it? Or does it break down after you mix it up?
I never do. It's extremely rare that I'll put any mud back in the bucket once I take it out, even if it looks clean.
Mud's cheap - not worth dealing with hitchhikers.
Yes, the crusties will re-hydrate with regular mud.
Contaminated mud, used mud. Through it away
Never, I am guessing he was doing that because this was a demo not a real job
Thanks for great video, i always had a problem getting rid of the wster
I use a similar cleaning method though I do it slightly differently; I use a medium stiff brush for plaster and joint compounds while using a stiff bristle brush for stucco and concrete cleaning. I use a dip, brush, dip method which seems to work fast and well; I also will keep towels in the vehicle for drying off tools before putting them away though if they’re going to get used the same day of next day I tend to not dry them as I use exclusively stainless and magnesium tools exclusively. I also keep smaller nylon and copper bristle brushes in my kit for getting the smaller areas but typically a putty knife will get things off. My trowels store on magnetic strips while most of my trowels live in a home made stand as I have dozens in different sizes from 1” through 14” and includes flexible to firm blades and scrapers.
While I will keep paddles in water most of the time if I don’t or just with some materials I’ll let the paddle sit and get hard then just knock things off which has worked OK for me for years. Thankfully I don’t do as much mud/stucco work as I used to as it can be tougher than the more skill less work side of things like cabinetry and finish work.
OMG you just gave me the greatest idea! Thank you so much. I am a stucco guy and I have a truck with a great storage lockers for the tools, but the trowels always seem to fall off. I have a magneted knife strip that we can't put anywhere in our kitchen so it just stored away. I am going to go mount that in my tool locker and the trowels won't fall over anymore. Thanks for the tip, I'm so happy now
BTW the best thing I like about taping is how easy the mud cleans off the tools compared to my stucco tools. Sand and cement and all the other mud we use for stucco is tough on hand tools. WD-40 is the only help
@@Phazetic99: No problem; I actually use 2 $5 magnet strips from Harbor Freight, 1 on top and 1 on bottom which holds the trowels fine and they can actually overlap so you can fit more side to side. I have numerous tools and will actually drop a trowel in my sponge bucket to soften up while I use a spare; with a stiff bristle brush I usually don’t have an issue cleaning them but occasionally stuff stick and I just let it set them knock out off with a wood chisel. Though WD-40 and green scotchbright is my go-to to deal with rusty spots. I have a small shop and have always had to be creative to fit everything in.
@@libertarian1637 Already installed that magnet and it works awesome!
@@Phazetic99: Glad to hear. One of the reasons I like watching TH-cam is to get new ideas, glad you were able to get a helpful one.
Thank you for making this video! Just the information I was looking for. You rock.
I keep a small hose with a twist nozzle in my truck. I am OCD and so as soon as I am done I scrape everything then hit it all with the hose before it dries on. It gets into all the cracks and small spaces better then any brush. The key is the drying even with the aluminum and stainless.
@Steven Ticino- what kind of a truck do you drive?! I've driven around with a hose n nozzle in my trunk too but I don't have a water source on-board to spray my tools.
"You should never have buildup on the back"... uhhh, right boss....
All jokes aside! Thanks for all the videos, they've helped me immensely.
That's a great tip about cleaning the compound bucket to avoid crusties.
My go-to for tool cleaning are green Scotch scratch pads. They make short work of mud and rust (even on dried mud too).
Ah, cleaning the sides of my bucket. Wow, did I get eyes rolling when I would do that! What can I say I didn’t have trouble with dried mud in the bucket. Thanks for a nice instructive video.
"Sigh, this is going to sound so bad." I knew it before you said it! Lol 👍
An old tile setter would always have a bucket with a couple shovels of gravel in his clean bucket. Stick the drill in there and spin the mixer: instant clean.
I clean all my plastic wedges that way , but with no gravel.
what about quick set mud that u cant just throw the excess back into the bucket? Just waste it all rinsing it off into the water bucket?
Hey Ben do you have videos on fixing cracks and holes that have orange peel or other textures?
He says they don't do much for texture up there, that kilted guy covers it well though ( he was primarily a repair drywall dude)
Do you have a preference on a magnesium hawk or aluminum. I don't care for aluminum as it's likely I have always used magnesium. My buddy for the DeWalt with the black coating on it, really enjoyed that too. Is there a video for metal filing or "machining" the edge of the Hawks back to straight edges as the trowel makes wear paterns in the edges.
Just a flat file, clamp it in a vice or flat on a work bench, and hand file it straight.
great hand tool practice.
How you transport and store the trowels. In what?
I bought a plastic rectangular bucket made for window washing squeegees at lowes to keep my knives, pan, tape, and a jab saw in. My biggest knife is a 12”.
In another video, Ben demonstrates the box he built ages ago (sort of like a lightweight knife block you'd see with a kitchen knife set-except with a carrying handle). If I recall, he also shows how he built version 2.0 of it. Does a great job protecting everything while also making it all quick access. Best wishes!
What do you do with the dirty water?
Thank you for the info!
What can I do to save my mud bucket that has dried mud on the sides above the rest of the mud without getting crumbs in my mud?
let's talk about putting things down drains. i was sanding dried multipurpose mud texture on a ceiling in a small bathroom. over the 30 minute or so job i got thickly covered in dust. and as i sweat it all got quite gummy. almost like a glue consistency. not wanting that in my shower drain. i had the wife hose me off in the back yard.
was i over-worrying? would that have been ok to send down the drain? - keeping in mind we have a septic system, not city sewer.
enjoying the videos! keep up the great and very helpful work!
Question for Vancouver carpenter or anyone that can answer. Imagine a recessed joint running across a wall. Mid sheet we have a butt joint/factory edge running up from the floor until it meets the recessed/beveled seam. Is the correct way to mud up the beveled seam and stop or mud "though " it stopping at the top of the beveled edge ?
I've done it both ways with my scuess, but what's the correct most efficient way
Still cant find a pan with rubber bottom grip. Tried “after market” rubberized magnet meant for the pan and it worked for about .7 seconds. Is that a particular brand that you got? It looks like it stays put very well. Great vid by the way. Essential! Cleaning is about routine. I clean my gear every time. Got used to it and works like a charm. Also how you store/carry your tools is a key as well. Thanks Ben. 👊
I had one of those red goldblatt ones. Piece of junk. Magnet glue apparently wasn't waterproof.
This was going to be my question.
I dont see any answer ?
@@jerseyjim9092 I tried Husky from HD and some blue perforated one (don’t remember brand) from Lowe’s and both failed miserably right away. Same symptom like your goldblatt. Lets wait and see if Ben will chime in. 👀
@@richardramey5943 Patience Rich, patience …
I thinks it’s a Kraft mud pan
Learning a lot from your channel, have a 1900 home in the US do you know if I can sand the old plaster walls smooth? They have years of over painting over and over and not to good of smooth plastering over the years as well. What it be good to cut all that down with sanding? Plaster not breaking or peeling anywhere, ceiling where replaced just not sidewalls. Hope you have time to reply thank you and love the channel really 😁😎
I just did this on some very jagged and pointy plaster walls in a bathroom, I sanded down the walls with 40 grit paper on a 5” random orbit sander and shop vac, it worked surprisingly well and quickly. Then I skim coated it with all purpose joint compound to help smooth out the walls
What's this about adding glue to the mud?
Amazing video and amazing work you do such a great job.
Keep up the amazing work Ben.
i like to wipe down the sides of the inside of the bucket with a wet sponge. picked that up from tiling.
While working I have a spray bottle with water and paper towels. So easy to spray and wipe. When finished all tools are cleaned to being spotless. It only takes a few minutes There's no other way for me.
I am really confused that this is a popular question? It's kinda implied that if you want a smooth wall you need clean knives and crumb free spackle.
@Matt Bottorf - Monk? Mr Monk? Is that you?
I use a bottle brush or maybe it's a small toilet brush to clean, it's really nice that the bristles anre 360
For me It seems If you don’t wipe everything off quickly at least with an old towel they will show signs of rust eventually even the stainless stuff don’t matter.
Nothing will piss you off more then crustys
I'm a new diyer, so can you just put a thick plastic bag in the mud pan for easier clean up or do they make a liner to go in the joint compound pan?
Try soaking you carbon knives in vinegar for a bit. If it isn't a poor grade of steel that should prevent them from rusting as fast or at all depending on the amount of time they are exposed to moisture.
gonna try this ,,
thanks for posting
3:10
What’s the difference between a crunchy and a crusty? 🤔🤔
Crunchy has a high volume of air whipped into it, whereas a crusty does not-it's more on the solid side. Only kidding... I don't know either! 🤷🏻♂
Leaving the mud bucket open to the air and next to the washout bucket is a no no- put a lid back over it
Very informative. Great job 👏
Thanks.
Hoping for some HELP!
My question is, 'Do I use Peel Stop before I use drywall patch or patch and then use the Peel Stop'.
Please advise.
I have plaster walls in a 1940s home. ALL the paint peeled off the outside walls when I was prepping to paint.
I could not get all the layers off and am left with paint ridges. Planning to patch to feather and smooth out. Sanding is not an option on such thick areas.
My question is, 'Do I use Peel Stop before I use drywall patch or patch and then use the Peel Stop'. Please advise.
My dad and I did a job and forgot a pail of water with a carbon 3" knife it. When we came back a year later to this shop for more work we found it. It was pitch black and not really smooth anymore lol
But what about cleaning up quickset? How do you deal with that?
Can you dump this water with mud in grass or street etc. Would it hirt anything?
Grip tape on the pan is a good idea!
How long can you leave plaster in a bucket, obviously with a proper lid?
Is it possible to remove cured hot mud from a plastic bucket? Already banged out the big chunks with a mallet but it still has residual mud stuck to the bucket. only 1/16” thick layer of mud.
You camera man or women is doing great 👍
We keeping our pronouns correct on drywall cleaning videos now lol 😆
I am a massive OCD cleaning person, and my drywall tools look new. I even scrub the handles! I NEED HELP😂😂😂
Is that non slip tape on the underside of ur pan? How is it on ur hand? It seems like it’s be really abrasive. Btw, love the channel, thank u for sharing!
Looks the same as mine, it's more like rubber and just came from menards
Someone with a septic tank here and just starting skim coating. I’m assuming it’s not wise to flush down the toilet being on the safer side?
I've recently started using automatic boxes. I love the time savings but cleaning takes forever. I spend almost 30 minutes cleaning.
*My favorite was make sure you clean it at the job sight (home owners - kitchen sink) and not at home - lol*
You: "your pan should never look like this"
Me: My pan always looks like that.
😂
Fastest cleaning mud pan is a flexible one like mudflextools way faster
Good advice on not leaving steel in contact with aluminum. To a chemist, that is literally a recipe for corrosion.
Great video, thanks !!!
Unless your trial is non-magnetic stainless steel will it will corrode because non-magnetic stainless steel is what they use them kitchen entry and it doesn't have no car but magnetic stainless steel has carbon in it to check it take a magnet to it
I just hose down my pan and tools in this area I don’t care about. Is that bad? I use the dry stuff you mix.
Got me a 40+ year old pan. Sometimes it gets cleaned right away, sometimes not cleaned until the next use. If I weren't lazy all tools would be cleaned immediately, but, well....
Good vocabulary
Hey Ben, do you do hourly contracting work that we can hire you to help us fix a couple of minor paint/drywall related deficiencies? We are also located in Vancouver, BC. Thanks!
Does drywall mud clog drains?
Do you have any tips for boxed mud in plastic bags? I know well now how not to do it.
Remember it's stainLESS steel, not stainPROOF steel. That's why mud stuck in corners can still cause corrosion.
" I'm not OCD about that" then continues to get every speck of mud off every tool 😂😂
One last note. What about all the water on the floor 🤔😁🇺🇸
Stainless steel floors, then leave it-otherwise, it's best to blot up excess water! 🤷🏻♂
It all depends on how much fibre you're eating! Do store you mud with water on top?
i put like a 1/4" of water on top.
Not intentionally.
Just leave your tools so home owners see them , next morning they will be clean 90% of the time.
I like to see them pat themselves on the back. I agree scrape when done then scrap before you start.
Scrap down inside of mud bucket. Mix mud next day, most important is the blade, mud on the handle not going to make a difference, nothing is harder to do after a bunch of mudding, sitting there and polishing your tools?
Has anyone tried the dishwasher for boxes and trowels?
One of my stainless steel putty knife was rusty after I leave it in water for a day.I came back clean after I use some wd-40,I google says even stainless steel can rust if you don't maintain it well😕
After I cleaned the
Trowel they get rusty. How do I keep them from not getting rusted ?
Lubricating spray! Oil based or silicone based spray! Wipe with machine oil!
If you dump.you mud back in the bucket, won't it get hard?
Say this in V.C's voice. "Cleaning tools? It's not just OK. It's, It's Necessary!!"
When I can't muster motivation to properly cleanup, I seal stainless tools into a half empty mud bucket. Nothing dries out, then clean at the end of the project. It's also a 'fun' way to misplace your tools- clear buckets please!
I finally switched to all SS tools. Break in is a bit of a bear tho. At least with carbon u can break them in quickly with sandpaper. I’ve managed to break in some of my SS tools by scraping painted walls. 🤷♂️. Anyone know a better way to break in a SS too kid love to hear it. Thanks
@Michael - what do you mean by breaking in your tools?
@5:03 I strive for adequate as well.
Scrubbie pad for paddle too