ESC acting funny
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2025
- Not sure what the issue is here. I've replaced the servo with a known good one so I've ruled that out. I've moved the wiring around to make sure there is as little possible RF interference. I've tried every trick I know. I'm hopeful the "glitch buster" I've ordered from NOVAK will cure it.
- ยานยนต์และพาหนะ
Also, I don't remember if you are running an external BEC with your esc... If it's a Novak Crusher esc ( wich I think it is vaguely ) they recommend the use of an external BEC if you run anything more than 2S ...
I've ordered their Glitch Buster in hopes that will solve the issue, but I won't know until I get it.
Isn't the Yeti XL stretching the limits of the Crusher / 4600KV combo a bit ?
It's the kind of setup you find in 1/10th scale 4x4 SCTs ...
In such a heavy 1/6th scale 4x4 basher It might be out of it's comfort zone.
Maybe the lack of an external BEC and the strain of the esc/motor combo put together are drawing to much from the batteries and the LVC kicks in or some sort of fail-safe.
RC Marty
You may be correct and that's what I'm beginning to think.
Have you tried re-binding your Tx/Rx and re-setting the ESC's end-points ? I'm sure you have but we over-look the small things sometimes when we want to get the things going.
I have not re-bound the Rx & Tx but I have reset the ESC.
Same results.
What motor and esc are you running ? I'm sure I saw it in a previous vid but I can't remember what combo it was... A Novak sensored esc with a 550 motor if I remember well ??
4PHD 4 pole with sensor.
teamnovak.com/products/index.php?main_page=product_info&cPath=2_123&products_id=555