How to Replace Water Pump 2005-2010 Chrysler 300
ฝัง
- เผยแพร่เมื่อ 17 ธ.ค. 2024
- Buy Now!
New Engine Water Pump from 1AAuto.com trq.video/ib-1...
This video shows you how to install a TRQ water pump in your 2005-2010 Chrysler 300. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This repair was done on a 2005 Chrysler 300 C 5.7L Sedan 4-Door RWD Automatic and the process should be similar on the following vehicles:
2005 Chrysler 300
2006 Chrysler 300
2007 Chrysler 300
2008 Chrysler 300
2009 Chrysler 300
2010 Chrysler 300
Tools you will need:
• Pocket Screwdriver
• 10mm Socket trq.video/oaRp...
• 13mm Socket trq.video/oa88...
• 15mm Socket trq.video/oa88...
• Pliers
• T50 Socket
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet trq.video/oaRp...
• 3/8 Inch Drive Ratchet trq.video/oa88...
• Torque Wrench trq.video/oapY...
• Gloves trq.video/oEo-...
• Hose Clamp
• Safety Glasses
• 10mm Allen Wrench
• 8mm Allen Wrench
Subscribe: / @trq
Check out our playlist:
Chrysler 300 1st Generation 2005-2010: • Chrysler 300 1st Gener...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great video. This will be the fourth time doing a water pump on the lx platform. Needed a quick reminder. Very instructional. Some insurance in addition to the belt inspection…Also inspect and replace tensioner and pulley if needed. If you hear squeaking on cold starts in conjunction with battery/charging issues, replace those parts. You can also find o-ring kits and replace the one on the heater line. And if you’re replacing the upper or lower hose, be careful, the inlet/outlet on the radiator are plastic.
Lot of rust does need a little cleaning. I think it is a good and helpful video but prefer holding water pump flush against engine block then installing bolts and water tube. Very good idea to torque bolts going into aluminum. Thanks for the really good video.
Good vid but word of advice for the guys like me replace it all so you know that your system is good nothing Like a week later ur thermostat fails and your doing this all over again
I've done this on my 6.1 Jeep and taking out the fans is not difficult and it gives you a better work space
Biggest words of advice watch until the end😭
Is the process the same for 2.7l
Thank you. Your are a life saver, which your detail information. I was able to replaced the water pump on my kid's car. Your the best.
the coolant that came out was orange, the new was green, what kind of coolant for an 06 hemi 300 5.7 ??
Thank you your are professional ❤
So you don’t need permatext silicon after you install your gasket on?
Great video👍🏾
Thank you
Is this the same for a v6 2.7 300
+@ericmoss5193 This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ
Wasted 5 minutes watching this dumbaz scree in the waterpump bolts