You are a genius!! As if the first generation werent good enough, now you improved it! Thank you for taking the energy to share. Consider putting a disclaimer about the hazard in handling razor-sharp metal.
Just made one of these and felt the need to say thank you for putting together such a well edited and clearly narrated guide. All the best from the UK.
After I inadvertently sliced off most of my fingertips & drilled holes into the remaining ones, this stove was handy & efficient for cauterization. Mama always said, "What doesn't kill ya makes ya stronger." This is why she always said that.
Nice clear video. Instead of holding the cut can with a cloth, you can use one of those neoprene soda/beer can cozies that fit over the can exactly. You can drill the holes before cut the ring off when the can is a little stiffer. You can use smaller energy-drink cans (8.4-ounce Red Bull, for instance, instead of standard 12-ounce soda can) or larger cans like 16-ounce Rockstar or 24-ounce malt liquor (Olde English 800, Colt 45, King Cobra) if you want a smaller or bigger stove. The larger cans have noticeably thicker aluminum walls, so they are little harder to cut but sturdier once assembled.
I finished mine ! I'll test it after I get another blood transfusion from my fingers cuttings and loss of blood, now im convinced to bring my kitchen stove on my next camping trip.
The "music" brings back painful memories of being stuck on a level of Wolfenstein and not being able to find a way out. The beauty of a soda can stove is that it's free -- until you add tape. Cut the cans longer, slip one inside the other and you're back to free.
one more thing...so glad there is someone teaching how to do these things, when TSHTF people need to know how to survive with what they can find. This is not just for campers. Good job
I also made that design...but if you fill half full on it....it will take a half a minute before flames goes out ....its fine I love that new improved design. Keep up the good work! God bless
Use 1/32 drill bit or if you prefer larger finger drains use 1/16 drill bit. Despite the 1980 Casio Synthesizer music and a laundry list of safety hazards, this is a great video on a very simple and useful product. Full disclosure, my dad drilled straight through his finger fixing a Christmas tree stand with these techniques... looked at me through the hole in his bone/nail. Love that man!
Very nice. I counted about 10 - 12 seconds from starting to full stable burn. That will save loads of fuel that was wasted on the original design just trying to warm up. 👍👍👍👍
the yellow flames are proof that the fuel isn't burning efficiently. I like the penny stove it seems to be one of the best. my grands and I made the card board and wax and cardboard and oil they seemed to be very close to the same in cooking time we did a little experiment on that one with 2 different fuels and made hot chocolate. still cool experiments and all will boil water and cook something to eat. great job thanks for sharing.
Probable the capillarity effect of the groove's in the inner can are too much,* sucking more fuel than is possible mix with air. * Maybe if make less groove's help.
Great vid! To get all thre creases out of the metal tape and get a perfect seal use the backing paper from the tape to rub the tape down. Gently obviously! Works perfect. Duct fitters trick 😉
So I just spent the last four hours watching stove videos. I decided I wanted to build a stove and I made this one. This one gets up and running within a few seconds. I watched a video where some guy made his version of the double wall can stove. Then he lit it and spent three minutes saying how awesome his stove was while he was waiting for it to warm up. This was a fun project. I've still got ten more cans of coke, I wonder what else I can make.
I just made one of these, first one I made off another video and it won't light, this one worked great, I already put it with my emergency coffee maker, in case the power gos out. Going to make some more of these for cooking to. Thanks man!
One small tip, when you're drilling the vent holes in the top don't have your finger on the inside of the can while youre drilling on the outside or you might wind up with a "vented" finger.
I want to describe a stove that I made after several years of R&D, for you. It was based upon your own design. I needed power and longevity of burn time for the outdoors. I needed to make Coffee, breakfast and hot water after that on one burn. Yet remain lite and compact to carry easily in my cook set. My stove is well over 45 min of burn time, usually about 54min burn time. I used a large sized , used Sterno canister for the base. I brazed in a smaller (you can JB weld this) a taller can upside down with the original top removed and fuel vanes added for flow down inside. The inside can ( heated pressurized fuel reservoir) is basically sealed once the pot or pan is placed on top. I packed the inbetween space with fiberglass insulation to the top level of the Sterno base can. The final part was to drill a 1/8th fill hole in the top of the braised center can bottom (which is now the top) to add fuel. This acts as the huge fuel tank , and low pressure heat expansion chamber. Of course the fiberglass is the flame ring just like your "Feest" stove and the principal is the same. However, the fuel volume is massive and there is an inherent preheat and charge with this design that acts more like a natural gas burner in efficiency and burn time. I have other alcohol stoves just like you. However, this is my go to must have HOG burner that out cooks all others for time and efficiency.
@@romainejayne1811 it's easy to make it. My stove design is also around 50 min of burn time. I just need 1 tuna can. I put the carbon felt first (or u can use toilet paper or jeans) to the bottom as the first layer. Then I give steel wool above as the second layer. Cover it on top with the iron mesh. I don't need JB weld or tape adhesive for my stove. I just need mini pot stand to boil or to cook. If I cook the rice, I put my simmer ring on top, to reduce the flame.
@@poutchiepuffin4266 I already bought my mesh but haven't made my stove yet. I leaned off using the carbon felt. Steel wool and jeans mat'l. lol Except my mesh is soft stainless steel and probably won't last long.
So many different designs. I did build a lot of versions around the time this video was made and my testing show the basis of the 3 part stove to be the most efficient. But the one I settled on was a very simple 3 piece design. Where the top pressed onto the bottom with a simple inner wall. No silver tape required.
Awesome. With fire lighting illegal in Britain, I've been looking for alternatives to a big, dumb butane cooker for my travelling kit. This seems a sensible primary for making a brew or a quick bacon butty. Perfect for my needs👍
@@shatterpointgamesThe Minneapolis police beat a homeless man who was lighting small fires in a parking garage to keep warm. We're all living in a dystopia ¯\_(ツ)_/¯
Great video, got here from Kenneth Kramm's video. He made, and uses this stove all the time, and it's great. I'm going to make this, and I appreciate your effort.
using a tall and a short can ie energy drink can and cola you get a size difference so one can will slide inside the other so you don't need the foil and it is stronger.
I actually have a decent tip here! A can opener will take off the top of a soda can with no sharp edges. You can fit a smaller hydroponic basket in the top doing that as well. Also, gloves are helpful you loon (but thanks for the solid instructional vid)
Awesome , I like the whole deal where it burns nicer and more efficient, medal tape has some goo glue type stuff , idk if I’d cook over it until atleast burning off that glue but really is cool 😎
Everyone commenting on getting cut on the aluminum edges probably haven't handled cut aluminum much. It's is a slicing hazard only if you are sliding your hand across the cut surface. Pressure straight down will not likely result in a cut even if you are pounding your hand down on it. I know, I demonstrated this to some naysayers by repeatedly slamming my hand on a cut can edge and showing no penetration. AnywAY! Great Video, Nice to show every step. I don't miss the lack of instruction, your actions showed everything and there were no words to confuse the issue. I could show this to any friend who speaks another language and they could follow this easily. The music was epically intense for the video, LOL. I felt like I was in a drama. Anyway, I"ve made a few cans before seeing this. I see this has more steps, and I can see why. I will try it. I like the way it looks and how it works.
I might try this just because it's cool. What do you think, would it be any easier to cut the can if it was filled with water and allowed to freeze first. Then you'd have something to push against and maybe cut through the aluminum completely. I think I might give it a try.
+Left of Everywhere That may work too by freezing but if you don't want to go to the trouble with the blocks of wood, you can use dollar store scissors and just a utility knife, a few of my prototypes were made that way and they came out great. The cans cut super easy.
the razor blade hangs out pretty far allowing it to flex, giving you some unclean cuts, putting them a bit further back on the board might help you with that.
@@Sokol10 If you store on the shelf, then yes. If you are on the hike and have some leftover alcohol inside the stove after cooking, its not a problem to store it insid the trangia burner till your next meal time 3 hours later. Leave it on a shelf with alcohol, will obviously corrode it over time so burn last fuel off. Alcohol is cheap anyway.
If you make and use one of these i hope you stay 5 miles from me. When that aluminum tape fails and it will yoybwill have a fire ball Then a forest fire to deal with. I use alcohol stoves 2-4 times a day, and NOT ONE AND OF THEM IS TAPED TOGETHER. THIS US AN EXTREMELY DANGEROUS STOVE!!!!!!!
Nice video! I was going on an overnight hiking trip with the college in 2005 and wanted something to cook my evening meal on. I would up buying one much like the first design from Tinny at Minibull Design. For my $5 he included a video on how to make them. I tested it, liked it, and set to work making some more. Wound up selling one to a classmate... for $5. Stove worked great and all I had to buy was the metal flue tape. I'll try your design for my next one. :)
Two weeks later (and many burns as well) no problems, this thing will light with even a small spark from a ferro rod. Although one lesson learnt was if you plan to use this stove make sure your pan is as dry as possible, if it isn't completely hold it over the flame for a few minutes then wipe away water that appears on the bottom, your efficiency will be severely effected if you don't.
It's a great idea, but may not work as well in cold temperatures. that was my experience with the penny soda can stove. The open center may make the difference though. Definitely worth testing!
Brian Wall my cousin made one for his deer blind and put it in a terra-cotta pot! And he is in Michigan! It heats up the pot and produces more heat. He said it actually roasted him out last night!
The flames look like they're dancing. Great video. Next step is how to create controllers to turn up/ down the flame. I would of loved to see you put out the flame safely.
Absolutely reusable. I test stoves by using them time after time. I have three ultimate stoves i put through the wringer. Original ultimate stove made from 2 Ocean Spray juice cans 500 burns Made from 2 monster cans has 390 burns Made from 2 Hansen energy drink cans with 350 burns
Just run longer time, and cause a big fire if you accidentally tip over the stove. ;) The objective of the "beverage can stove" - created 20 years or more, is for provide hiking a easy stove, with ability to boil two cups (american) ~473 ml of water, using 1 (best types) or 2 fluid oz (~30 ml) of alcohol, for reidrate lyophilized food, make hot beverage (coffee, tea, chocolate...). For camping, bushcraft, where's weight is not a big issue, can use more capable pressurized gas stove, wood gas stove, but an alcohol stove can attend well. See AB Camping videos where the guy use a Trangia Stormkok (storm cooker) alcohol stove for cook more conventional food, in rain, could weather, snow conditions.
@@Sokol10 Soo that Trangia & cook kit (stove) was/ is made for military application is why it’s so effective in bad weather to feel better on a full belly in those bad conditions.
AJ Saveliev You set the pot directly on the stove. Otherwise the large flame coming out of the center consumes too much fuel. The outer jets will continue to burn.
No you do not set the pot directly on the stove. I have used this set up for years for backpacking. Initially I used 3 tent stakes to hold the pot over the stove, sometimes not the sturdiest. I also tried just finding appropriate sized rocks, not always easy or possibly. More recently I fashioned a pot holder out of a bit of stove-pipe coupling. Works good
Setting a small backpacking pot directly on top seems to be too close in my experience. I bought a small pot and stand combo by Esbit that can burn solid fuel tabs and is just the right size to fit one of these DIY alcohol can stoves. CS585HA model number. The can stove fits in the package for storage quite nicely and the stand has pretty good wind protection for the flame as well. Great for single person very light weight and small volume stove. Sterno stove bases are pretty commonly available at department stores, etc. If concerned about covering the center, could cut out a bottom section of another can to fit over it while burning.
ARE THESE TWO HE BUILDS BETTER THAN THE OTHER SIMPLER STYLE WERE THERE IS NO BIG HOLE AT THE TOP BUT INSTEAD JUST A LITTLE PIN HOLE ENCIRCLED BY A BUNCH OF OTHER PIN HOLES? His looks like a way bigger flame but is it worth it? Thanks for the upload Andrew W! Blessings!
if the issue is only the preheating of the stove, adding the very common fiberglass wick to the outside is awesome for that. Speeds up blossoming of the stove. I preheat all alcohol stoves, and it's undoubtedly the way to go. You can also use a can lid or just a bit of foil honestly, to hold fuel under the burner and preheat it.
The concept is ok but You know you can avoid using aluminum tape by letting the top side longer so that they come together one inside the other, keep trying. 👍
@@escapetherace1943 Well you need to try again cause i just slided top side inside bottom side and mine works perfectly. Btw, its my first soda can alcohol stove. Newbie luck prehaps? :D
Pushpins are great for uniformity just make sure they go in straight. Sucks when everything is perfect and then one little flame shoots out slightly too far or at a different angle than the rest.
@@TheDrip50291 I can't take the credit for the upload as I didn't upload it. However, I have had my own experience using these and simply gave a response to your query.
When your dish towel isn’t working and you need to grab a sharp piece of thin metal, feel free to wear gloves. Drilling toward your finger is not only foolish, but is also another great opportunity to wear gloves.
Using gloves while opperating power tools is an even worse idea.. just Google- glove caught in (and then insert whatever power tool) and watch the carnage...
That's like trying to cook a turkey with Esbit or canned heat. Not a good idea. Besides you need a full size oven and not a stove for something like that.
You are a genius!! As if the first generation werent good enough, now you improved it! Thank you for taking the energy to share. Consider putting a disclaimer about the hazard in handling razor-sharp metal.
Does everything need a warning label though.. what about the one for TH-cam that tells you there are people like me here? lol.
Just made one of these and felt the need to say thank you for putting together such a well edited and clearly narrated guide. All the best from the UK.
After I inadvertently sliced off most of my fingertips & drilled holes into the remaining ones, this stove was handy & efficient for cauterization. Mama always said, "What doesn't kill ya makes ya stronger." This is why she always said that.
LOL
The men want to criticize and make him do to their way. The women just get in there and do it. 😄 Great comment.
Nietzsche said it first, but yo mama must have been well read.
Nice clear video. Instead of holding the cut can with a cloth, you can use one of those neoprene soda/beer can cozies that fit over the can exactly. You can drill the holes before cut the ring off when the can is a little stiffer. You can use smaller energy-drink cans (8.4-ounce Red Bull, for instance, instead of standard 12-ounce soda can) or larger cans like 16-ounce Rockstar or 24-ounce malt liquor (Olde English 800, Colt 45, King Cobra) if you want a smaller or bigger stove. The larger cans have noticeably thicker aluminum walls, so they are little harder to cut but sturdier once assembled.
I finished mine ! I'll test it after I get another blood transfusion from my fingers cuttings and loss of blood, now im convinced to bring my kitchen stove on my next camping trip.
The "music" brings back painful memories of being stuck on a level of Wolfenstein and not being able to find a way out. The beauty of a soda can stove is that it's free -- until you add tape. Cut the cans longer, slip one inside the other and you're back to free.
steal the tape from the hardware store and you're back to free
Get caught and you can teach stove making to the cop (constable on patrol) that's watching your cell.
@@quantanglement +1 for teaching me that constable on patrol bit.. amazing I've never heard that before.
To be honest i'm not sure if that is where cop comes from - just heard it from someone else. But, seems like it could be.
@@quantanglement grrrrrrrrr hahaha bright idea
one more thing...so glad there is someone teaching how to do these things, when TSHTF people need to know how to survive with what they can find. This is not just for campers. Good job
What are TSHTF people? I know how to survive in the wild but I'm not familiar with that acronym.
I also made that design...but if you fill half full on it....it will take a half a minute before flames goes out ....its fine I love that new improved design. Keep up the good work! God bless
Use 1/32 drill bit or if you prefer larger finger drains use 1/16 drill bit. Despite the 1980 Casio Synthesizer music and a laundry list of safety hazards, this is a great video on a very simple and useful product. Full disclosure, my dad drilled straight through his finger fixing a Christmas tree stand with these techniques... looked at me through the hole in his bone/nail. Love that man!
Does it have a use besides a hobo dinner? Say, in a power outage, is it ok for a heater or a lamp?
Very nice. I counted about 10 - 12 seconds from starting to full stable burn. That will save loads of fuel that was wasted on the original design just trying to warm up.
👍👍👍👍
Made one of these after following your instructions, works a treat, thank you!
the yellow flames are proof that the fuel isn't burning efficiently. I like the penny stove it seems to be one of the best. my grands and I made the card board and wax and cardboard and oil they seemed to be very close to the same in cooking time we did a little experiment on that one with 2 different fuels and made hot chocolate. still cool experiments and all will boil water and cook something to eat. great job thanks for sharing.
Probable the capillarity effect of the groove's in the inner can are too much,* sucking more fuel than is possible mix with air.
* Maybe if make less groove's help.
Always drill directly toward your finger
Alright
Stop when you see red fluid.
I like drilling directly toward my finger 💉
Or your eye... Depends on the situation.
@@cynthiamoon372 Dont be daft. Thats just the coolant to protect the drill bit!
Very well done, instructional video from start to finish. I like the use of tape instead of ole JB Weld. Can't wait to build a few. THANKS.
Great vid! To get all thre creases out of the metal tape and get a perfect seal use the backing paper from the tape to rub the tape down. Gently obviously! Works perfect. Duct fitters trick 😉
Ahh. Nice
Thank you for your contributions to soda can stove R & D 😎👍
So I just spent the last four hours watching stove videos. I decided I wanted to build a stove and I made this one. This one gets up and running within a few seconds. I watched a video where some guy made his version of the double wall can stove. Then he lit it and spent three minutes saying how awesome his stove was while he was waiting for it to warm up. This was a fun project. I've still got ten more cans of coke, I wonder what else I can make.
I just made one of these, first one I made off another video and it won't light, this one worked great, I already put it with my emergency coffee maker, in case the power gos out. Going to make some more of these for cooking to. Thanks man!
All fingers were harmed in the making of this stove
use sand paper to dull the cut edges.
That’s a good demonstration of cutting a soda bottle that’s Excellent.
One small tip, when you're drilling the vent holes in the top don't have your finger on the inside of the can while youre drilling on the outside or you might wind up with a "vented" finger.
With capillary action.
That video game music is almost as cool as the stove and the stove is very cool. Props!
I want to describe a stove that I made after several years of R&D, for you. It was based upon your own design. I needed power and longevity of burn time for the outdoors. I needed to make Coffee, breakfast and hot water after that on one burn. Yet remain lite and compact to carry easily in my cook set. My stove is well over 45 min of burn time, usually about 54min burn time. I used a large sized , used Sterno canister for the base. I brazed in a smaller (you can JB weld this) a taller can upside down with the original top removed and fuel vanes added for flow down inside. The inside can ( heated pressurized fuel reservoir) is basically sealed once the pot or pan is placed on top. I packed the inbetween space with fiberglass insulation to the top level of the Sterno base can. The final part was to drill a 1/8th fill hole in the top of the braised center can bottom (which is now the top) to add fuel. This acts as the huge fuel tank , and low pressure heat expansion chamber. Of course the fiberglass is the flame ring just like your "Feest" stove and the principal is the same. However, the fuel volume is massive and there is an inherent preheat and charge with this design that acts more like a natural gas burner in efficiency and burn time. I have other alcohol stoves just like you. However, this is my go to must have HOG burner that out cooks all others for time and efficiency.
I wish you would make a short video for us to show your model, too. Sounds powerful!
@@romainejayne1811 it's easy to make it. My stove design is also around 50 min of burn time. I just need 1 tuna can. I put the carbon felt first (or u can use toilet paper or jeans) to the bottom as the first layer. Then I give steel wool above as the second layer. Cover it on top with the iron mesh. I don't need JB weld or tape adhesive for my stove. I just need mini pot stand to boil or to cook.
If I cook the rice, I put my simmer ring on top, to reduce the flame.
@@poutchiepuffin4266 I already bought my mesh but haven't made my stove yet. I leaned off using the carbon felt. Steel wool and jeans mat'l. lol Except my mesh is soft stainless steel and probably won't last long.
So many different designs. I did build a lot of versions around the time this video was made and my testing show the basis of the 3 part stove to be the most efficient. But the one I settled on was a very simple 3 piece design. Where the top pressed onto the bottom with a simple inner wall. No silver tape required.
The inner wall has any functional purpose, or is it there just for a longer lifespan? Y want to test a stove like this one here
Awesome. With fire lighting illegal in Britain, I've been looking for alternatives to a big, dumb butane cooker for my travelling kit.
This seems a sensible primary for making a brew or a quick bacon butty.
Perfect for my needs👍
You're living in a dystopia
@@shatterpointgamesThe Minneapolis police beat a homeless man who was lighting small fires in a parking garage to keep warm. We're all living in a dystopia ¯\_(ツ)_/¯
This is great..thanks for showing how to cut the can!!!
3:42 That slight collapse of the can wall is why you should do all scoring first, then seperate the sections after all scoring is done.
Thank you utube .and the man who share this great idea
Great video, got here from Kenneth Kramm's video. He made, and uses this stove all the time, and it's great. I'm going to make this, and I appreciate your effort.
Very cool,
👍👍👍👍👍👍👍
At 8:55 or so I just knew when the drill bit went through the can the next thing we would see is a fountain of blood, lol. Cool video man!
Very nice Alcohol Stove. Enjoyed your video.
FOR SAFETY:
Use second can for bottom (3/4 ").
(No sharp edge hazard)
You. Absolute. Madman.
This stove is so cool that I am going to watch it again and again
Great idea. Looks great!
using a tall and a short can ie energy drink can and cola you get a size difference so one can will slide inside the other so you don't need the foil and it is stronger.
💯 % agree!
This is the best video yet.
Awesome video! Great detail and easily replicable by watcher!! Great Job!!
I've seen many videos on TH-cam but I like your video and also make just like you. Good job 👌👌👌
Instructions - A+
Music - F-
cmon musik is kewl
@@clpevyNil F*cking Gen Z hipster EDM noise.
(Not a boomer)
Very ratchet and clank
beeeeowoooow deeeo beoow beeewoweo dun dun nanan da duh dun nu uh.
@@scottdunn2178 it's D grade not F grade wtf
I actually have a decent tip here! A can opener will take off the top of a soda can with no sharp edges. You can fit a smaller hydroponic basket in the top doing that as well. Also, gloves are helpful you loon (but thanks for the solid instructional vid)
Feels like I'm rollin through the hood, making a camp stove. ;-)
🤣
Very nice beautiful stove
Awesome , I like the whole deal where it burns nicer and more efficient, medal tape has some goo glue type stuff , idk if I’d cook over it until atleast burning off that glue but really is cool 😎
Everyone commenting on getting cut on the aluminum edges probably haven't handled cut aluminum much. It's is a slicing hazard only if you are sliding your hand across the cut surface. Pressure straight down will not likely result in a cut even if you are pounding your hand down on it. I know, I demonstrated this to some naysayers by repeatedly slamming my hand on a cut can edge and showing no penetration. AnywAY! Great Video, Nice to show every step. I don't miss the lack of instruction, your actions showed everything and there were no words to confuse the issue. I could show this to any friend who speaks another language and they could follow this easily. The music was epically intense for the video, LOL. I felt like I was in a drama. Anyway, I"ve made a few cans before seeing this. I see this has more steps, and I can see why. I will try it. I like the way it looks and how it works.
I might try this just because it's cool. What do you think, would it be any easier to cut the can if it was filled with water and allowed to freeze first. Then you'd have something to push against and maybe cut through the aluminum completely. I think I might give it a try.
+Left of Everywhere That may work too by freezing but if you don't want to go to the trouble with the blocks of wood, you can use dollar store scissors and just a utility knife, a few of my prototypes were made that way and they came out great. The cans cut super easy.
Very good idea
Bad ass craftsman skills🦅😬
great video but as a Mother, I had butterflies in my stomach watching this PRAYING you wouldn't get cut! lol! Good job Andrew
Nice lil improvement 👏👌
the razor blade hangs out pretty far allowing it to flex, giving you some unclean cuts, putting them a bit further back on the board might help you with that.
yep and while at it use a 2nd screw to keep it in place instead of ur thumb ;p
Two screws in the nicks allow you to swap out the blade easily as well, loosen, replace, retighten.
Use a heavy book and sandwich the blade between the pages at the correct height(s): no boards, no screws.
@@harveychapman3843 Best advice!
@@harveychapman3843 amazing advice.
Great stove build thanks
You should put amounts and burn times. Also what fuels burn best and longest.
more burnable holes more amount burnt.unless he could make vaporized fuel like normal gas tanks
Denatured alcohol
@@garymckinley6974 illegal in California
@@asamusicdude I didn't know that, no wonder I don't see it anymore.
@@garymckinley6974 your freaking kidding!
Not having seen the previous build, what's
'the breakthrough that makes the newer design burn so much better?
Finally! a use for diet Pepsi.
haha
I thought all diet sodas were for target practice
hahahaha that's the best use I have heard for diet sodas!
Iacomus Lycanthropus Fd
Diet Coke is VERY unhealthy more unhealthy than regular coke so DONT drink it
Great stove 😊❤
If you wanted this as an emergency backpack light/stove, how would you store the alcohol ?
Trangia stove stores liquid
That's already provided for in the 5th of JD he's got or should have with him.
The alcohol comes in plastic bottles right from the store. Just make sure you save the cap. ;)
@@Astro80s Store alcohol inside Trangia B25 burner can correde and produce cracks in the stove walls.
@@Sokol10 If you store on the shelf, then yes. If you are on the hike and have some leftover alcohol inside the stove after cooking, its not a problem to store it insid the trangia burner till your next meal time 3 hours later. Leave it on a shelf with alcohol, will obviously corrode it over time so burn last fuel off. Alcohol is cheap anyway.
Excellent video! Doing this weekend...much thanks!
If you make and use one of these i hope you stay 5 miles from me.
When that aluminum tape fails and it will yoybwill have a fire ball Then a forest fire to deal with.
I use alcohol stoves 2-4 times a day, and NOT ONE AND OF THEM IS TAPED TOGETHER.
THIS US AN EXTREMELY DANGEROUS STOVE!!!!!!!
high-temp silicone probably
Nice video! I was going on an overnight hiking trip with the college in 2005 and wanted something to cook my evening meal on. I would up buying one much like the first design from Tinny at Minibull Design. For my $5 he included a video on how to make them. I tested it, liked it, and set to work making some more. Wound up selling one to a classmate... for $5. Stove worked great and all I had to buy was the metal flue tape. I'll try your design for my next one. :)
What are other fuels you can use?
wao nice sharing ............ love from my workshop............
Could I use beer cans, different music, & maybe not drill into my fingers?😜.. still cool tho👍
Very great video! Thanks!
do you have to have the pan above it setting on a rack?
OHHH man you topped the original design..⭐⭐⭐⭐⭐
Doesn't the fuel eventually affect the glue on the tape?
Capi Berra metal tape is rated for high temps.
I made one using aluminium tape rated for 160 degrees Celsius. I got some initial leakage from the glue on the first burn but after that it was fine.
Get UL Listed hvac foil tape for best results
Two weeks later (and many burns as well) no problems, this thing will light with even a small spark from a ferro rod.
Although one lesson learnt was if you plan to use this stove make sure your pan is as dry as possible, if it isn't completely hold it over the flame for a few minutes then wipe away water that appears on the bottom, your efficiency will be severely effected if you don't.
he didnt say heat and high temps he said the fuel.
I really liked watching the flame at the end, it was like the flame was dancing to the music.
It's a great idea, but may not work as well in cold temperatures. that was my experience with the penny soda can stove. The open center may make the difference though. Definitely worth testing!
Brian Wall my cousin made one for his deer blind and put it in a terra-cotta pot! And he is in Michigan! It heats up the pot and produces more heat. He said it actually roasted him out last night!
The flames look like they're dancing. Great video. Next step is how to create controllers to turn up/ down the flame. I would of loved to see you put out the flame safely.
The only way that would work is to have the alcohol pressurized, running past a control valve or else use a wick.
Just wondering how long it burns. Is it re-useable...or just one time and then dispose? Do you need to put it on fire resistant surface?
Absolutely reusable.
I test stoves by using them time after time.
I have three ultimate stoves i put through the wringer.
Original ultimate stove made from 2 Ocean Spray juice cans 500 burns
Made from 2 monster cans has 390 burns
Made from 2 Hansen energy drink cans with 350 burns
Instructions unclear dick cut on coke can
ooo a dick cut sounds horrible
so funny! lol lol hahahaheeheehee
@@mcgillicuddy4008 Men smh hahahaha
Nice beautiful works
can it work with other types of fuel like naphtha
What if you made the stove deeper, added more alcohol, would it blow up or just run longer ?
Just run longer time, and cause a big fire if you accidentally tip over the stove. ;)
The objective of the "beverage can stove" - created 20 years or more, is for provide hiking a easy stove, with ability to boil two cups (american) ~473 ml of water, using 1 (best types) or 2 fluid oz (~30 ml) of alcohol, for reidrate lyophilized food, make hot beverage (coffee, tea, chocolate...).
For camping, bushcraft, where's weight is not a big issue, can use more capable pressurized gas stove, wood gas stove, but an alcohol stove can attend well.
See AB Camping videos where the guy use a Trangia Stormkok (storm cooker) alcohol stove for cook more conventional food, in rain, could weather, snow conditions.
@@Sokol10
Soo that Trangia & cook kit (stove) was/ is made for military application is why it’s so effective in bad weather to feel better on a full belly in those bad conditions.
I’ve also encountered this problem where the flame wasn’t coming out of the original one and turns out If you just make the holes bigger it works
Thank you for this. I just hope I can do it right! I really think this is very cool and convenient! For hard times! Thanks!
Oh thanks didnt know they had factory made kind. I'm kind of new at this. Thanks for the tip where would I buy one of those at for 3 dollars? 😁❤
@Matthew Hopkins
😊
@Matthew Hopkins ok thanks!I've been looking on there. What is the name of it ? So I can type it in and find it?
Do you set the pot directly on the stove or do you need something to put the pot on?
AJ Saveliev You set the pot directly on the stove. Otherwise the large flame coming out of the center consumes too much fuel. The outer jets will continue to burn.
No you do not set the pot directly on the stove. I have used this set up for years for backpacking. Initially I used 3 tent stakes to hold the pot over the stove, sometimes not the sturdiest. I also tried just finding appropriate sized rocks, not always easy or possibly. More recently I fashioned a pot holder out of a bit of stove-pipe coupling. Works good
Setting a small backpacking pot directly on top seems to be too close in my experience. I bought a small pot and stand combo by Esbit that can burn solid fuel tabs and is just the right size to fit one of these DIY alcohol can stoves. CS585HA model number. The can stove fits in the package for storage quite nicely and the stand has pretty good wind protection for the flame as well. Great for single person very light weight and small volume stove. Sterno stove bases are pretty commonly available at department stores, etc.
If concerned about covering the center, could cut out a bottom section of another can to fit over it while burning.
You can do either. I like to set the pot right on top with Penny cans. The double wall ones I use a pot stand.
When cutting the stove bottom, fill the can will moist sand to maintain some strength to the walls
How to add more fuel without dying or letting it flame out?
ARE THESE TWO HE BUILDS BETTER THAN THE OTHER SIMPLER STYLE WERE THERE IS NO BIG HOLE AT THE TOP BUT INSTEAD JUST A LITTLE PIN HOLE ENCIRCLED BY A BUNCH OF OTHER PIN HOLES? His looks like a way bigger flame but is it worth it? Thanks for the upload Andrew W! Blessings!
Great design, great video, dreadful music
Delightful Douschebaggery Yes I agree
Must agree
Utterly agree....tht music was vexing to the core 😫😫😫
Still not as ugly as your thumbnail.. Lol
The music is awesome.
Right on. Doesn’t the adhesive on the tape fail due to the heat?
Neat, still prefer putting steel wool in the walls to help wick.
Works good,I will have to try this better method.
Listening to this video makes me feel like I'm exploring a haunted house and zapping monsters with a level 1 blaster.
Beautiful. 👌
A little commentary along the way is much more informative talking about the steps, anything else like music I would rather turn on my Stereo.
if the issue is only the preheating of the stove, adding the very common fiberglass wick to the outside is awesome for that. Speeds up blossoming of the stove. I preheat all alcohol stoves, and it's undoubtedly the way to go.
You can also use a can lid or just a bit of foil honestly, to hold fuel under the burner and preheat it.
The concept is ok but You know you can avoid using aluminum tape by letting the top side longer so that they come together one inside the other, keep trying. 👍
doesn't work, it's too tight and messes up the middle layer (i tried this)
@@escapetherace1943 Well you need to try again cause i just slided top side inside bottom side and mine works perfectly. Btw, its my first soda can alcohol stove. Newbie luck prehaps? :D
@@fulldnbboy it burns out fuel way too fast anyway and most the heat's wasted. The tuna can stove designs work a lot better
Very well done.
Would a push-pin work for the holes instead of a drill?
I've done it that way successfully. For smaller holes I used a short needle that I'd imbedded into a wood handle
I've done it both ways. little effect on efficiency of the stove, drill is way easier
Pushpins are great for uniformity just make sure they go in straight. Sucks when everything is perfect and then one little flame shoots out slightly too far or at a different angle than the rest.
I used a drywalling screw worked great.
Very clever👍
13:26 The flames are dancing in rhythm to the music.
ParagliderCollapse not this time.
ParagliderCollapse
Are you having a large catered event at your house that you need these burners for? Foods gotta stay warm somehow. What do you use these for?
Boiling water in the backcountry for freeze-dried meals a backpackers delight or hiker.
@@Sel-Shackfield This is definitely an awesome DIY stove. Appreciate the vid and the time you spent on it!
@@TheDrip50291 I can't take the credit for the upload as I didn't upload it. However, I have had my own experience using these and simply gave a response to your query.
When your dish towel isn’t working and you need to grab a sharp piece of thin metal, feel free to wear gloves.
Drilling toward your finger is not only foolish, but is also another great opportunity to wear gloves.
Using gloves while opperating power tools is an even worse idea.. just Google- glove caught in (and then insert whatever power tool) and watch the carnage...
Does it burn alcohol faster and how long does the fuel takes before it depletes
great video, it looks easier and more efficient that others, the music sounds like from a porno.
Good video, nice tools.
I'm not sure what I did wrong, but I get a strong blue flame in the center and my pinholes around the edge never ignite.
jmaskdc sounds like the alcohol vapour isn't able to make it up to the pin holes. maybe try crushing the inner piece a bit more?
jmaskdc yeah me too, im trying to cook a pork roast im gonna cut thin before it goes bad too, hopefully Ill figure it out in a few minutes.
keep up the good work youngman
I made one of these last night but it's taking forever to cook my turkey.
That's like trying to cook a turkey with Esbit or canned heat. Not a good idea. Besides you need a full size oven and not a stove for something like that.
Takes bout a gallon of alcohol to burn all the feathers off.
🤣
Get your turkeys right out of the egg, eh?
Great design