Repair Lithium Rebar Cutter With Brushless Impact Wrench
ฝัง
- เผยแพร่เมื่อ 14 มิ.ย. 2024
- I paid about $80 for the Lithium Rebar Cutter, The motor and the plastic nut are broken，There is no battery for the cutter‘s socket，So I repaired it with a cheap brushless impact wrench.
- แนวปฏิบัติและการใช้ชีวิต
*Good **MyBest.Tools** value compaired to other brands*
I was gonna say "just buy a replacement, would be way cheaper than this full rebuild and turning and all that," but then I googled how much a cordless rebar cutter costs. Holy cow good job!
this was REALLY impressive. the whole built, the fit and the finish on the aluminum piece.
Tbh I'm quite impressed with how well that lil cheap motor handled powering the hydraulic pump to get thru that big ol' piece of rebar at the end. Like that's just impressive that it managed to get thru that.
I’ve used a little hex impact drill like that in a pinch to take lugnuts off.. powering a little hydraulic pump should be easy, on top of being brushed to brushless upgrade
@@megaman992 agreed. The motor doesn't really do much work it's the hydraulic pump that holds the load.
Well done, it looks like it came that way. I think you made a good decision to not open the hydraulic pump as they can be a nightmare to reassemble and the fluid was clean. Cheers Stuart 🇦🇺
What a Frankenstein-looking tool. Great restoration!
I'm new to your channel, and I'm instantly hooked! The previous videos I've watched have been great, I've been inspired, with your help, step by step I've fixed a few of my old tools, I'm on top of the world, full of confidence, by watching you, I can do it too!!
Until now, McGyver and the A Team have nothing on you!!
Absolutely Brilliant 👏 👌
Alot of time spent to fix a worn out tool,but I admire the effort/skill to make it nice to look at.
Making the connecting flange was really hard task that you did nicely. I think that lathe machine is our new member
Очень хорошо..Я часто смотрю твои видео и сам люблю что то востановить,отремонтировать или переделать..Мне нравится смотреть как ты востанавливаешь инструмент.
Привет из России
Amazing to watch and amazing skill.
But couldn't help but feel making a mount for the smaller motor in the original housing would be so much more efficient 😂
The big sigh at 3:24 when it spills all over hit me in the feels
Another fantastic restoration. The modification of the modern power source to fit the restored unit to include the machining of the transition section is next level craftsmanship.
Brilliant Restomod, Didn't stop, just kept finding ways to succeed... Most Excellent. Thank you for sharing.
آرامش شما توی کار رو خیلی دوست دارم. عالی بود ممنون 👍👍👍
A very skilled restoration artist with knowlege in machine works, electricity and electronics.
Near video should be restoring and making the front part look like it matches, like it was one whole tool. Awesome video.
That cutter seems very gentle cutting the rembar, it doesn't suddenly break it and make a loud noise.
*we have cheap and efficient angle grinders these days but i didn't know such an add on existed, very interesting.*
When the budget jumps into hundreds of thousands the consumer tool market falls short of what the industrial trades have. Decking gun that drive finger sized "nails" into thick steel beams. Portable hydraulic benders for pipe or re-bar. Some job sites won't let you make a spark so no friction cutting tools. Hilti has made hi-torque battery powered impact guns and grinders for years before milwaukee even thought about it.
12:40 the dremel speaking Italian 😂😂
Ещё 3d- -принтер добавить и можно самостоятельно инструмент делать, а не переделывать))) А так залипательно и прикольно)
Еще можно самому накопать в шахте медь, железо и выплавить
Great job fixing and making parts for it but why didn't you clean up the cutter part of it??
Enjoyed the video and I gave it a Thumbs Up
I am Soo impressed. You should sell it. Pit it on an auction for your viewers.
Just wow, a really great job of repair, and thanks again for sharing your thoughts and great video
Проэк супер, но сделал такой красивый переходник, а насадку не почистил и не покрасил, было бы как новое всё!
Комментарий в поддержку канала и ролика, а также труда мастера ремонтника.
Отличный ремонт
Loved this project very well done !
seeing you use the tap at the end made my arse pucker up. looked so close to snapping.
Lots of skilled work. Nice!
Cool restoration and very impressive tool!
My god, I've never seen a pinion puller that small. Now I need one B)
Awesome job. You have a great talent.
Very nice job. Works like a charm.
In the beginning .. I thought that not get fitt . But that was creative . Amazing job 🥰
Что вы там сами не можете? Когда он вал переходной изготовил ,я уже был восхищён но вот когда из балванки такое выточил! Молодец
Thank you; was very pleasant to watch.
fantastic! Thanks for sharing the approach you took to solving this problem.
Однозначно молодец! Золотые руки! 🤝👍
watching from Philippines 🇵🇭
Good video,impressive retro fit.you mean the old one wasn’t a makita keep on doing what your doing.👍👍👍😎😎😎
Really great job 👏
we need to fund our boy a milling machine, even if it's just a manual one.
Awesome!! Absolutely awesome work!!!
Great restoration and video
Beautiful work
Nice work makes me wish I had a lathe.
Wow that is phenomenal you are an artist
Well done dude. Fantastic.
Cool and very useful tool!
this is professional work .... i like it man
Finally! Nailclippers that are worthy of my nails!
What a great project. Congrats. Btw. Could you repair my wife?
Awesome 👍👍👍Thanks for sharing.
Congratulations for the video, friend 👏 👏👏!!!
Nice work man..
Es un trabajo magnífico
Why the impact wrench when the cutter is using a hydraulic reduction?
I confess I had my doubts but that turned out damn impressive! BTW: i assume you did but change the gear oil. Preferably with synthetic. I'm certain it oil requirements will be in the owners manual on line! Also stir a magnet through the oil to see if its shedding metal.
Amazing job
Simply wonderful
Is it just me or those sounds while sanding the aluminium @ 12:51 these sounded like the ray gun Toy I had when I was a kid wow the early 90s where a blast for me, other than that fantastic video, from a metal worker point of view - very little planning from what I could see but over all I'm very impressed
Kalau bisa di perjual belikan akan lebih ada manfaat nya dan berguna lagi dan harga di sesuai kan dengan harga pokok...
Mungkin ini yang dinamakan ide jenius ada nilai tambah dari barang yang sudah jadi di tambah pemikiran yang baik 👍
congratulations friend great job 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷
Los mejores 20 mins de mi vida 💛 que buen vidio
You made me say: wait what a couple of times. Makita wannabe was the hardest one. (The original Makita is not cheap at all).
Мы сами себе создаём трудности и героически с ними боремся!!!
thats a 1000 $ tool good job
Seems like a lot of effort to repair something that you could probably just buy new for the same cost you repaired it for but yeah, ik you were doing it so you can improve your own skills and make a good video and it turned out well, good job :)
Also knowing it could be done is better yet beside would would not been able to watch it
عمل ممتاز ومتقن 👍👍
When a not-so-genuine Makita was repurposed to do something extraordinary.
Ellerinize sağlık.
Wow. Thank you.
This was amazing.
12.19 = mini EDM 😁
nice 👍
What benchtop power supply is that? May be looking for a nicer one for my tinkering
Разобрать гайковёрт что бы собрать это сомнительная выгода)
думаю, главная выгода -- контент и комментарии. Ну и сделал всё же рабочую вещь.
Так она и так рабочая была, нужно было просто акб подключить.
The problem with brushed motors is that when they get stuck, they take on the new title of short circuit.
use one for my toenails they work great!
Use a centering bit on lathe! it will make your life a lot easier ! good job tho. i was curious about that small motor having enough torque to cut that!
Wow!!! So cool!!!
They should make newer with fast gap closure, for thin bars would improve the response time
Really good job¡¡
I wonder if you restore all the parts ..and paint it with silver..BTW nice idea
Very nice.
Excellent!
There are some mounts for a hand mill to mount it on your lathe. Just an idea for saving time.
7:36 where has that tool been all my life?
u could out faze the bolts to use the old screw holes ,,,, and making a milling machine from an angle grinder maybe next project...
12:48 - Sounds like when Schwartz in A Christmas Story is pleading with Ralphie not to leave him because his tongue is stuck to the pole.
Very good 🔥🔥🔥
Excellent
So how do I watch a video like this with a simple fact that these no talking like please explain to us what in the world you're doing damn tool like please makes it so much more interesting that way
I wonder, why didn't you simply take longer screws and screw all the way from black flange to the blue plastic? Seems the hole pattern is similiar enouch that it would be possible.
Amazing..👍👍👍
You should have covered the magnetic core with tape, It is hard to clean the metal shavings. Also for machining the contour of the aluminum piece, you could have mounted the drill with the cutting rotating bit against the lathe and turn the lathe head by hand for the three 120 degree portions to machine that lip.
I was very surprised he didn’t use the lathe to contour that piece. He still did a good job but I figured the lathe would have been the machine for the job rather than a dremel
Beautiful work!
Whoozer Great Job !!!
Muito bom 😊😊
Be honest, you make pew pew sounds whenever you use it.
Спасибо!!!