I have a brand new RC car. Put the engine on like 20% power just to get it to move. But I noticed anything past that and the car would stop dead cold. And my clutch bell does not have some colour action occurring. Is it possible there was an issue during manufacturing?
Hi, I have a vx 18, when I Rev the car it doesn't move, but as soon as i Lift it up, the wheels turn but when on the ground it doesn't move, I checked the clutch, the dogbones and cups, all good, any idea why is it doing that?
is the thin black lining on the inside of the clutch bell important??? i was checking it over and i accidentally rubbed a ton of it off, not knowing it was there. please comment. And yes, im new to the hobby.
is this the same way for a 24.7 motor bobby im having a hard time getting it off cause my starter i have on it is a roto start is there a video on how to do this with just a allen ranch and i dont have the money to buy extra tools i have the tools that came with my starter kit sorry im broke
In 4:12 Any one with answer ? I ordered a brand new engine but it’s not the 2.5mm bolt ,, it’s actually 8mm nut , I’m confused how to put everything together .
please help i have a 4wd turnigy 1/16 scale nitro and when i pull the pull chord the wheels move at the same time , the car doesnt start or move. i was told that my clutch had burnt but i dont know what to buy to fix it please help. (btw im new to this)
You like to replace clutch bearings every couple of runs? Come on. I know you're trying to sell stuff but that there is just gonna screw some kid over into buying things they will most likely never actually need. Please keep your sales pitch or whatever mildly realistic, and also short. 8 FREAKING MINUTES!!!!
@gammelman1 i have seen traxxas e-revos take four 60 foot falls on to the body with just the battery door breaking i dare you to try that with yout tonka shit
@gammelman1 ok sorry man, Most of the ppl watching this are noobs. Of course there going to screw something up...And yea im getting in to brushless also.
Just port and polish a engine like this I surprised it turn out well just need to tighten my clutch
I have a brand new RC car. Put the engine on like 20% power just to get it to move. But I noticed anything past that and the car would stop dead cold. And my clutch bell does not have some colour action occurring. Is it possible there was an issue during manufacturing?
Hi,
Thanks for this nice video.
Is there any 3 shoes clutch for the same motor?
Cheers
Hi, I have a vx 18, when I Rev the car it doesn't move, but as soon as i Lift it up, the wheels turn but when on the ground it doesn't move, I checked the clutch, the dogbones and cups, all good, any idea why is it doing that?
is the thin black lining on the inside of the clutch bell important??? i was checking it over and i accidentally rubbed a ton of it off, not knowing it was there. please comment. And yes, im new to the hobby.
There also wasn't a screw on the clutch bell, is it because of that?
Do you guys sell the bearing washers? I bought a used car and when I inspected the clutch bell, I found no washers!!
is this the same way for a 24.7 motor bobby im having a hard time getting it off cause my starter i have on it is a roto start is there a video on how to do this with just a allen ranch
and i dont have the money to buy extra tools i have the tools that came with my starter kit sorry im broke
In 4:12
Any one with answer ?
I ordered a brand new engine but it’s not the 2.5mm bolt ,, it’s actually 8mm nut , I’m confused how to put everything together .
We need more spare parts in Australia. I been searching for a supercharger kit but not available.
Daniel Do try RB innovations and for spare parts ebay
@gammelman1 What makes it not hobby grade? These things are Quite tough if you ask me...
please help i have a 4wd turnigy 1/16 scale nitro and when i pull the pull chord the wheels move at the same time , the car doesnt start or move. i was told that my clutch had burnt but i dont know what to buy to fix it please help. (btw im new to this)
Real KING!!! Clutch shoes (and a clutch shoe tool for better replacement) and some blue lock tight
@gammelman1 so what do you got big shot?
You like to replace clutch bearings every couple of runs? Come on. I know you're trying to sell stuff but that there is just gonna screw some kid over into buying things they will most likely never actually need. Please keep your sales pitch or whatever mildly realistic, and also short. 8 FREAKING MINUTES!!!!
@xTopLevelGamingx I think they been doing that on facebook?
when i pull the pullstart the clutch makes a little ringing sound. I can move the car easily like an electric one. I'm new to nitro pls pls help
i wish u guys would have a give away tht would be awsome!!!
i have all the tools besides the lock tool you have
Thanks 4 sharing. Greet DCRlive
@gammelman1 I have raced them around, Dont start shit if you cant back it up.....
@gammelman1 how? i dont think a 5 year old would be able to play with engines...
@gammelman1 You have a good One Too!
How to put 2speed clutch on exceed 1/10
Btw, it’s not a nut, it’s a bolt
Sheldon Mueller it’s actually a screw
If I here him say washer one more time I'm gonna swallow a nail...lmao
No bolt only grub screw
Kyle Vance tbh
@gammelman1 First Off its T-Maxx, not T max/s. Show me what you got, then go from there..Otherwise shut it.
QUATRO
@gammelman1 i have seen traxxas e-revos take four 60 foot falls on to the body with just the battery door breaking i dare you to try that with yout tonka shit
@gammelman1 ok sorry man, Most of the ppl watching this are noobs. Of course there going to screw something up...And yea im getting in to brushless also.
second
third
first