Isuzu 1.7 dti / y17dt opel astra g p0251 (read description)

Hi to all of you, try not to skip the video, i have written instructions, please leave a comment and if you like my videos press thumbs up and consider SUBSCRIBING to my channel.
This is one of the methods to repair opel astra g / corsa c / isuzu 1.7 dti EDU/ECU , don't just resolder pins without complete disassembly and clean all the pins.The car had p0251 spill valve malfunction as dtc, the engine will stop when warm or stall due to the dry solder joints. This is a simple fix that will last if it's done properly.
****************************************************
Consider support my channel : www.paypal.me/AmpGarage
****************************************************
Contact: [e-mail]
#p0251
#isuzu
#opel
#astra
The music is created in FL studio.
/ minimalb3havior
Contact me : [e-mail]

[@amperugarage]

Check my COMMUNITY tab on my channel for additional updates.

[@apanachixperia4888]

Bardzo dobrze pokazane żeczowo i jak dla laika.
Ja swój sterownik musiałem oddać do regeneracji ponieważ wcześniej tak zeczowego filmu nigdzie nie było ale teraz bym się pokusił o naprawę sam.

[@deniskhorovodov7176]

Thank you very much, your video is very helpful!

[@bundylovess]

Nice job mate big thumbs up 👍

[@zbigniewkwiatkowski1813]

Dobra robota, a nie tylko papranie cyną na zewnętrznej stronie PCB, jak to robią mistrzowie szybkiej kasy.

[@Ricardo-ee2mt]

Hi, thanks for sharing.
1- Do you use special wire to make the bridges between the PCB and the connector?
2- Do you use normal tin (lead with tin) or do you use another type of solder?
3- What type of gel do you use to apply on the pcb?
4-what do you seal the cover of the switchboard with?

[@amariabdslam1398]

What is the material that you put with the toothpick before desoldering
Thanks for your help

[@amperugarage]

Flux

[@deniskhorovodov7176]

I'm searching the specs for a smd component on this board, it's a SOT-23 with a code sAK. Don't you know what it is?

[@katherinebarale6298]

De donde son yo uruguay 🖐️

[@sergiofernandez6096]

What kind of problems can the EDU module cause?
I have a Meriva with a Y17DT engine, which loses power between 1500 and 2000 rpm, during this problem it releases white smoke, above those revs it works correctly.
The rest of the engine is revised and ok
I await an answer, thank you very much!

[@iahumesanger]

1:01 =))

[@fs0c1ety_bs92]

What's the name of that thing u use to remove soldering

[@amperugarage]

Desoldering station

[@eldjtwity]

Estimado usted podría dar los valores de los capacitores?
Dear you could facilitate the values ​​of the capacitors?

[@amperugarage]

10uf / 35V

[@eldjtwity]

@@amperugarage agradezco su respuesta.
Trabajo en reparar este módulo pero está falla de que se quemen los capacitores no me había llegado.
Agradezco su respuesta

[@mukisicario7079]

Cobat unit on left form three unit stake range 40 klm cut half ground and trench unit D2 following opened ground train cabin over and out kayak7Y AO AS UN 0 1-10R* VFVFAOSD k

[@younesmernaoui1209]

Where can you find the module?

[@amperugarage]

The location is behind the engine, you can see it under the car bolt on the engine .

[@younesmernaoui1209]

@@amperugarage what type of bolts just curious sinve i'll be fixing it later in the evening and currently not at home, so i know if i need to buy a new set

[@amperugarage]

Younes Mernaoui 10mm wrench