If you adjust the mixture screw or the idle screw and it doesn't do anything you need to re-jet the carb, that's why it idles and runs well with the older carb is because the jets are the right size for that engine setup
3 things, you said its a larger carb, the throttle cable is sloppy, and the valves need adjusted. 1, the rod the throttle cable hooks to going into carb needs the rod adjusted, take c-clip off and adjust that. (By replacing the cable you might fix 2 issues...) 2, fix the cable solid at grip. Use a hose clamp. 3, adjust valves use honda specs. Been down this road a few times...
If you need new plastics or parts that is a crf50 replica and the wires are for the kill switch good luck on the build and you can get a lot of parts of eBay and Amazon just type in crf50 parts and they should all fit and they are cheap and good 😊😀🏍
I noticed the fuel pin was disconnected if u didn't refit that to the slide it wouldn't get fuel through the main jet making it run lean and just stall when you hit the throttle
It’s a Chinese pit bike (a copy of a lifan) pit bike also the excess wire is for the starter motor even if u don’t have a starter moto it’s just excess wires
The motor called lifan we have it here in grecce in the most bikes is the best Chinese motor but I prefer you from a other pit bike like yamaha 125 cc or honda 2 stroke
Or could be a fuel mixture problem might not be getting enough fuel so the people before probably turnt the idle screw all the way in to keep it running
The old carb may be fixed yes.. but you sprayed carb cleaner over the seals which are probably gonna ruin them.. also the old carbs throttlepin was loose which will mean you may push it in and not get it out.. that may be another reason why it ran so high.
hey i need some help so i put my broken e scooter on facebook market place on trades for a broken dirtbike so its fair and someone offered me a dirtbike, most plastics are gone its 125cc some wires are disconnected and it needs a damaged spark plug according to him he said he also has the plastics and that's everything broken, I have no experience with dirtbikes but I do with electronic wiring, I'm 15 I work on e scooters and e bikes, I have one of both and it may not seem like it but I'm capable of fixing them do you think I should buy it and take the risk?
Try turning the idle that’ll probably fix it because That idle way too highIt probably runs perfectly fine just tried turning the idle down I’m pretty sure it’s to the left or you can probably kick the bike and have it running and turn it left or right
Could you help me. I just bought a 125cc pitbike and when i try riding it i put it in gear and let the clutch out a little bit and it pulls a big wheely. Any clues why it does this?
its running lean as hell. try backing the fuel air mix screw out a bit on the newer carb
thatguyrj 7 or adjust the needle I’m sure it’s on the lean side an adjustment of the needle one level down will richen it
Well he dont kno where to turn the rpm down so ya think hes gonna know where to change the needle/mixture screw
Jeah Same idea
I have that same pitbike i bought it for 100€ and it works really good and it has new tires etc..
Finallly I’ve been waiting firrr thisss
This is pain full just adjust the idle screw
Ben Wray aye
They did last episode but it didn't fix anything
EXACTLY BRUH
Ben Wray yeah watching this was extremely painful
Ben Wray IKR
If you adjust the mixture screw or the idle screw and it doesn't do anything you need to re-jet the carb, that's why it idles and runs well with the older carb is because the jets are the right size for that engine setup
It only ran okay with the old carb once out of the 5 times we started it, I ended up ordering a new carb.
3 things,
you said its a larger carb, the throttle cable is sloppy, and the valves need adjusted.
1, the rod the throttle cable hooks to going into carb needs the rod adjusted, take c-clip off and adjust that. (By replacing the cable you might fix 2 issues...)
2, fix the cable solid at grip. Use a hose clamp.
3, adjust valves use honda specs.
Been down this road a few times...
dat laatste deel was fk grappig lol
Behind the scenes bij Legend's Garage 😂
Ze noeme dit ook wel is een klein flieterke
Legend's Garage wacht jij bent Nederlands!?
Ik ook
They dont sell ssr pit bikes in Europe so it’s just a unbranded pit bike
Oof
Canna Blake it looks like a pitpro
Looks like a xtreame pro
@@jesseshanor4991 its a lifan
KLX 125
Ive been waiting for this for soo long, thanks for making this
i wated for this for this omg love your videos hope your channel grow up to millions
If you need new plastics or parts that is a crf50 replica and the wires are for the kill switch good luck on the build and you can get a lot of parts of eBay and Amazon just type in crf50 parts and they should all fit and they are cheap and good 😊😀🏍
Thanks for the tip!
I had the same problem ended up being the throttle peice that connects to the carb was to small
Do you know what the Bike is called id Love to learn more about it and maybe Buy it
It's either a Samurai or Apollo pit bike.
Sounds to me like the needle valve is stuck or the bowl may have a pin hole in it
Thats a funky pitbike 100%
It sure is!
dit is echt geweldig blijf doorgaan man
Danku, ga ik zeker doen!
bought one jus like it nd had the same problem with it rving high i adjusted the air fuel mix nd idle until it was running normal
You can buy one of these online for like £150
might not be helpful now but try adjusting the idle screw
i guess you had installed a mikuni vm22 (26mm) carburetor, uhm right?
I noticed the fuel pin was disconnected if u didn't refit that to the slide it wouldn't get fuel through the main jet making it run lean and just stall when you hit the throttle
Yes, this was fixed off camera.
It’s a Chinese pit bike (a copy of a lifan) pit bike also the excess wire is for the starter motor even if u don’t have a starter moto it’s just excess wires
4:40 ones for gear indicators
O okay, Thanks!
The motor called lifan we have it here in grecce in the most bikes is the best Chinese motor but I prefer you from a other pit bike like yamaha 125 cc or honda 2 stroke
Thanks, All these engines look so similar 😅
really hard to say if its a SSR or not, brand names are different everywhere..
Plus that idle screw look like it’s been screw in not out. Screwing it out will bring the revs
The idle screw did nothing. The carb was junk.
Or could be a fuel mixture problem might not be getting enough fuel so the people before probably turnt the idle screw all the way in to keep it running
4:26 that thing show what gear u have i think.. U propably know what i mean.
Nice
Finally it’s out yay
The old carb may be fixed yes.. but you sprayed carb cleaner over the seals which are probably gonna ruin them.. also the old carbs throttlepin was loose which will mean you may push it in and not get it out.. that may be another reason why it ran so high.
I ended up ordering a new carb.
dope project so far I love it
Thank you!
the extra wire is for if you get lights
To take of the screw heat it up with a torch or a lighter
I wish I had had a pit bike I’ve been wanting one for years but I’m poor so I can’t afford one
🤣🤣
If you are poor how are you watching this 😂😂
I'm sure you can save up some money for a cheap second-hand pit bike!
U should buy a 20€ plastics kit from ebay
AnthonyOW you can get those plastic kit things for €8 on aliexpress
@@Rick-du6xq ok
hey i need some help so i put my broken e scooter on facebook market place on trades for a broken dirtbike so its fair and someone offered me a dirtbike, most plastics are gone its 125cc some wires are disconnected and it needs a damaged spark plug according to him he said he also has the plastics and that's everything broken, I have no experience with dirtbikes but I do with electronic wiring, I'm 15 I work on e scooters and e bikes, I have one of both and it may not seem like it but I'm capable of fixing them do you think I should buy it and take the risk?
Try turning the idle that’ll probably fix it because That idle way too highIt probably runs perfectly fine just tried turning the idle down I’m pretty sure it’s to the left or you can probably kick the bike and have it running and turn it left or right
Idle screw did nothing. The carb was junk.
its the choke it works like a throttle to pump the gas through your engine
hello i love your series if you could make more videos about that engine
More videos about the pitbike coming soon!
i really like this cheap pitbike project, hope to see similar stuff in the future :)
Thank you! More video incoming!
I’m pretty sure it’s Apollo 125 2010 I don’t know the year I’m just guessing
That extra wire by think Cdi box is for a ignition key
Greetings from lithuania ;)
If you need a new carby I've got one for 125cc pit bike but I wouldn't know how to send I to ya
Send it to me just bought a project👍😂
Wollah zieke gasten haha ik blijf wiet kopen door ulder 😂😂 volgende stap zou een quad moeten zijn vriend 😉😉😉
Er komt binnenkort een quad aan!
LMFAOOOOOOOOOO HOW TF DID U RANDOMLY JUST START FIGHTING 😂😂😂😂😂 MADE MY MORNING. LOVE FROM NYC BRO
nyc sucks
I'm glad you enjoyed the video! Love from Belgium!
pak voor uwe carbu rem reiniger da werkt beter om the kuisen :)
Bedankt voor de tip, heb toch maar een nieuwe carb besteld ;)
what about checking the air and fuel mixture screw?
I did, didn't seem to do much.
Legend's Garage what’s your elevation your jets might be set to the wrong elevation
I have the exact same problem! Did you find out what was wrong?😬
I ended up ordering a new carb.
Btw I was first and I’ve been watching for 6 mins now
*nobody cares*
*nobody gives a fuck*
Who asked?
Thank you, I appreciate the support!
If i were u I would of bought a mikuni copy carb for like a 50 or small 110
good video!
Could be cause u don’t have a chain allow the motor to spin
First, nice video
Thank you!
A friend is gonna throw away his pit bike and i took it....the front shocks are as rusty as those....LOL
door de carburateur wat af te stellen kan het al wa beter draaien
Het hele motorblok ligt momenteel uit elkaar 😅
Could you help me. I just bought a 125cc pitbike and when i try riding it i put it in gear and let the clutch out a little bit and it pulls a big wheely. Any clues why it does this?
DEZESEBAS maybe let the clutch out slower. Or you could be giving it to much gas
@@pugproductions1801 the thing is i dont give it gas and when the free play stops it shoots away
Pull a big wheelie? Does it rev high? How much "throw" does the clutch have?
I had a Suzuki ozark 250 and it idled like that when the choke was on
thats logic
Did you find out what was up with the carb myn doing same
I ended up just ordering a new carb.
fiddle with the idle screw, its on the carb
I fiddled with it, didn't seem to fix the problem.
Do you know where to get a carb like the old one ?
I ordered a different one online.
This man had no fucking gaskits on the manifold
You dont have a rubber seal on the contact of the engine
I like your. Videos
Thank you!
Just adjust the screw on the carb for the idle
Adjusting the idle screw did not do anything.
nice!
There is a idle screw that controls the idle
I turned the idle screw, it didn't do anything.
It worked a lil with other carb cause ur idle screen too high
Turning down the idle screw didn't do anything.
Or the idle needs Aujusti
Your supposed to take the jets out of the carb and clean them
Already ordered a new carb.
Looks like an atomic pit bike or a lifan pit bike
6:42 *TomoOrow*
Sounds like autotune lol
The carburettor needs to be tune there should be a screw on The carburettor to turn down the revs
Turning the idle screw didn't do anything.
Back the idle screw out on the carb
I did, it didn't do anything.
The other cable for electric start
4.24 is for the stator
Thank you.
You need to get crf50 plastics
Corey is the best Norton u look gay as fuck lol
It is a waste of money I did the same thing
I first need to get the bike running well ;)
Im pretty shure that the spare plug is for a sprayer
A sprayer? What do you mean with "sprayer"?
Ik heb het zelfde gehad maarcdan bij mijn dax ge moet kijken bij uwe chok
How is school?
Pretty good, thanks for asking!
Turn the idle screw
It looks like a Baja or a cool star
thats a Roketa 125cc pitbike i had a nice blue one sold it because back rim was broken i could prob fixed it
I honestly still have no idea.
Was it all really worth it though
Yes £50 is well worth it
In my opinion, yes it was worth it.
@@LegendsGarage bless
Mooi ding man
Put the same cab
video starts at 14:30
How dare you expose the secret message in this video only meant to be seen by secret agents!!!
Or just turn idle screw down 🤷🏼♂️😂
Turning down the idle screw didn't do anything.
Adjustment idle screw
Turning down the idle screw didn't do anything.
I put a 230 carb on a 80
Its a bajah ssr 125 my friend hade one
The guy in the video at 16:34 looks like fps russia
It is a lithen
Why not buy a carb off ebay
It's a lifan 125cc trust
Turn the idle screw down it's on the carburetor
Johnathan Webber he alr tried that, it didn’t change anything
I tried turning the idle screw, It didn't do anything. I ordered a new carb.
I think it's a 125 cc ssr
Kan je een keer een Nederlandse video maken
It’s the huge air filter get a pod
Craiglist bestaat toch niet in belgië is het tweedehands misschien
Craigslist bestaat in België, hij komt wel van 2dehands maar craigslist is beter bekend internationaal.
It does it to my motorbike
how much u want for it
It is not for sale.