I solved my fan problem by taking a new fan and holding it against the bottom of the case about where the old fan is located. I then drilled two very small holes in the bottom case in the approximate area of the fan screws. I was then able to loosen the screws thought the holes and pull out the fan and install the new one. This saved me from removing the entire guts of the PC just to replace the fan. The holes make no difference to the PC. Thanks again for the video and your replies.
Just used this video this morning when I got stuck swapping out the HDD for an SSD: Gently pry out the HDD to remove it. BONUS! Found the SATA to laptop adaptor was removable and installed it on the new SATA SSD. Everything boots and works!😃👍🏻💻
regazzz for future reference if anyone is having the same problem with lines distorting the screen, you need to follow this disassembly video all the way to the bezel removal, then look for a strip of aluminium tape that is stuck on the inside of the bezel above the screen power inverter, simply remove this tape and all your problems will go away, i cant for the life of me work out why its even there in the first place.
hello mate, i have an Acer Aspire 6930z and the Wifi LED i keep blinking on on and every few seconds when Wifi is turned on... is that normal ? or it should stay On, not blinking ?
***** Does the Wi-Fi card happen to be Broadcom by any chance? If so you can disable blinking by editing driver inf file or in the registry change: ledbh0 -1 to ledbh0 1.
B Murf i think is Atheros man, but i'm asking if it is normal to keep blinking whern Wifi is On ? every few seconds it keep's blinking.... is my first Acer Laptop and i don't know much about Acer Laptop's... that's why i'm asking Before i have had a HP and the Wifi LED stay ON
I have Acer Aspire - 874G32Mn manufactured 09/04 and I must say this serie is one the best cooling design in the world, Temp up limit does not exceed 80 degrees celcius even under full load for hours (stress tests). I am still using my laptop and really happy with it.
I was stumped trying to loosen a HDD from this model. In this video you did it so very fast I could not see just what move you made to loosen the HDD from its connection to the motherboard. I did try sliding it a little & nothing happened, was concerned not to apply too much leverage. I did notice about 6 screws were missing from around the HDD due to previous technicians most likely losing them. I have successfully removed and replaced HDDs from other models, but this one stopped me cold. Other than that, a great video.
I like it, but I was hoping you would have also shown how to replace the DC jack. I can't take it out from the plastic. I had another laptop with a similar plastic design, but that one came off easily. Do you have any suggestions on what I should try? Thank you!
I answered my own question >.> I was using my flashlight and found a very small red latch on the inside and it pops the cover on the dc jack on the outside. It reveals two more screws that have to be taken out to continue the removal of the DC jack. Thank you again for the video! :D
Thank you for replying so quickly. You are right - my eyes played a trick on me - I see now that you did not simply remove the base cover of the computer but instead had to pull off the entire guts out of the base cover from the top. That means this is the only way to replace the little grey fan at 11:53. The screws to this fan are under the base cover of the computer. To get to the screws I would have to remove almost all the internal organs from the top. Wish there was a better way.
the metal doesnt slide out but I was able to take it out like you do it with that yellow object. What's the secondary hard drive for? Sata2 drive doesn't seem to fit in
Hi thanks for the video - I need to replace the fan and the video seems to have edited out the part where you took off the bottom cover off the lap top. I took out all the screws from the bottom but no go. Do you remember how to get the bottom off?
I you think it is booting up you have at least feel a fan working, but you also can plug in an external monitor (don't forget to switch to external monitor) and than look will anything appear. If not than it is possible that gpu is dead. If will than LCD bad or cable is not connected.
question... you didn't happen to look where the bluetooth connection on the mobo is did you? I know this model has the option by which i mean you can press that bluetooth light on the kb but that's about as much as it's going to work unless you get a bluetooth dongle. Just wondering if there's a connection thingymajig inside so I don't need to pick up the dongle.
hey bro, i have the same laptop, my problem is he is getting to fast hot, some people told me to open it and clean it, but do i have to take the keybord & screen to out to open the back of it?
On mine the screen has started to flicker and the left half of the screen has gone dimmer to the right half. Would this be caused by the inverter and is it an easy enough job to replace the inverter?
Hey regazz, i'm desperate, please help me man... I dissasemble my Aspire 6930 to replace my CPU following your Video Guide and now when i power on my Laptop, everything is working except the iluminated Acer Logo on the Back Cover ... How can i make it to light up again ? :(( Is the cable that you dissconnect at 6:08 responsible for the Acer Iluminated Logo ? I appreciate if you can guide me please...
Thank you so much.I want to renovation the cpu&gpu thermal paste. Do I have to remove screen the thermal paste when I renovation the cpu&gpu thermal paste ?
Pretty late answer, but in case someone else comes here and sees this: Nope, I didn't have to take apart the screen when I replaced the thermal paste a while back. But it was pretty rough! This laptop's build is pretty complex, have to pay attention to details and be careful when connecting connectors again.
do you know if i can find the screen in mexico? i've been looking for a screen for months and my laptop stil works the problem is that i can't close it x.x (i have an Acer aspire 6935) thank you!
Thank youvery much!I have a problem with my hdmi port when by accident i pull the hdmi cable hard from the port and from then the hdmi port doesnt work! Can i replace the port? Can i find same port to fit? Thank you
Hi, do you know if there's a way to change the dc power jack? :( i opened the monitor just like the end of your vid, but i can't find a way to open that little capsule
unopezzo I remember this ridiculous design. It giving me a headache just by looking at this type of dc jack location. First of all you will need to remove a Front Bezel (around 14:25) than you will have a better access to a dc jack. There should be some screw/s that are holding it.
ok but i need to remove my fan. i tried to open bottom and remove it but i can't do it. should i remove my keyboard to do it? isn't there any other way? because im afraid of damage my laptop
Yes, you will need to follow this video remove keyboard and pretty much everything I have done. Just keep in mind this is a take apart video. So, you don't need to disassembly an LCD to get to a fan :)
Hello, "undercase" is a case bottom. This part is like a base and everything goes in to it. To replace a case bottom you will need to remove everything out of it.
@@regazzz well , the laptop had 1 hdd only and had like 100 gb of photos and videos. When i changed it to sdd the videos and photos were already in there but how because it was a brand new ssd.
@@MzQx watching on my phone, first comes to mind that maybe there is another drive in the location where I removed small door at 00:14? If not there, it could be only in CD rome and instead of CD rome. Because this laptop doesn't have an internal SSD or anything like that. Check that compartment and check if you have CD-rome / DVD rome there.
This is a great news! Sorry, I don't have time to answer questions right away, trying to keep up with all at once. Once a day! :) Anyway thanks for notifying!
thanks for the video master :) i need to clean my acer 6930g's fan so i opened bottom of it but i could not do it because there is a part that blocking fan. could you tell me how to clean fan or if you make a video for that it could be perfect
What did you take apart at 1:10? Do you know where the CPU and the GPU are and if they are easy to access? Also are they replaceable? Finally is the RAM hard to replace? Sorry for all the questions but thanks a lot! Nice video!
Hi, nice video. I wanted to ask you ... do you know how to access the power jack of the pc? I need to see if something is unsoldered or if I need to replace it .... because changing the angle of the monitor the power disappears .... Thank you
I wouldn't say it and learn how I would watch this video upto the point where I am removing the DC jack. Additionally I would check if the DC jack is actually removable or not. Video probably not the best choice specially on the phone or some small screen but you can search for Mobo on eBay and find pictures.
hi,i have d same laptop with 4gb ram and it would b great if i could put in a graphic card, since there APPEARS to be slot for it ,can it be installed.
Hi, I don't have this laptop anymore, so, can't make another video... If you will watch this video, you will notice that the fan is easy to access, means easy to clean. Hold a fan blades (prevent from rotating it a lot) and use canned air to blow dust away.
Hey man, the screen of my 6935g is broken. Well, not really the screen, but the lightning; it works but is dark as hell. I am indeed a little bit afraid of opening it, so I´d like to ask first; is it possible that the lightning isn´t broken and it´s just a loose cable? And if it is broken, can I fix it or is it better to buy a new screen? Thanks in advance!
Hi! Im from Argentina. I have the same Laptop and a few days ago the screen started flashing, but if I press in the middle of it, (in the Acer Logo) the screen stop flashing and the faliure stops. Is possible that the flex is not working ok? Or was loosened? Thank you very much!
Hello, this way or another one, you will have to remove a palmrest first and usually motherboard. Disconnect DC jack from motherboard and plug in new one.
Do you guys think it is posssible to access the fan if I only open the first big cover on the backside of the notebook? Or do I have to take apart the whole notebook till i have the motherboard? Because I want to clean my fan and renew the cooling paste for GPU and CPU. Cheers
I rarely edit my videos, I pulled my archive with this video and there was no editing in this video. At what part of this video do you experience some problem? (just give me a minutes where to look)
hello mate, i have an Acer Aspire 6930z and the Wifi LED i keep blinking on on and every few seconds when Wifi is turned on... is that normal ? or it should stay On, not blinking ?
Hi, after my cooler has stoped to work, I ordered new one by amazon. After watching this video, I managed to replace the cooler by myself. All worked fine, but then the HDD started to get too hot and the laptop was just turned off. So I checked the temperature with some software and it showed me 50-51 °C. What's wrong with the HDD? What have I done wrong by assembling the laptop? Any ideas?
You are welcome! The problem is that it is not possible to remove a case bottom without taking everything out from inside. Case bottom is like a base where everything goes in. Yes, this is only a way.
Great job..the reason I watched this video is to see where the CMOS battery is ?? didn't see it..my 6930 will not boot and alot of people are saying to removing battery. any help would be appreciated
TY for that for sharing this great video with us and all the info... Really helpful I love your screwdriver can you tell me the model so i can buy the same :D Thank you
Hey man, this videos is a "take apart video" so, it is basically depend on a model of a laptop. Te remove a keyboard - you will not need remove a LCD, but in some laptops to remove a palmrest you will need to remove LCD, because it is blocking it. At the start you can remove a keyboard and try a canned air, in fan, but be careful, don't make it spin a lot, fan can be damaged.
Sir i have acer aspire 6930 and it has problem like it stuck on acer logo and when i press F2 then bios is not open what should i do .plz sir i also watch your this channel from lockdown . And also support it
can someone tell me what the little silver cap that holds and keeps the charging cord from wiggling is called? mine fell out somewhere and now my battery wont stay charging when i keep the cord in. I'm pretty sure its cause the cap thingy is missing.
I don't know what it's called, but I have the same problem with my 6920. Mine is still there, but loose and wobbling around. Affects the charging of the battery. It'll say that it's 100% charged, but then just frequently dies. I have to put something under the charger plug to jack it up at an angle to get it to charge. It's very old still with Vista on it. Still going strong. I don't know if the power jack needs replacing or if it can be just tightened. It seems like those silver caps are screwed on. Mine just sits on my desk and I never move it or abuse it. Seems like just opening and closing the screen just wears it out. But it is like 15 years old!
regazzz hello mate, i have an Acer Aspire 6930z and the Wifi LED i keep blinking on on and every few seconds when Wifi is turned on... is that normal ? or it should stay On, not blinking ?
***** I just have this laptop for 1 week, and i want to know if is normal for the Wifi LED to keep blinking every few seconds... is should just stay On or is it normal to keep blinking while i'm connected through Wifi ? I have recorded a video, take a look on my channel ...
Nice video, yet the part I needed to put back together you didn't dissasemble. I took my laptop apart a month ago to replace power jack which is in hinge and now I don't remember how to put it back together!
No problem getting this type of comments all the time, but surprised how many videos out there where people using nothing at all. I don't have this type of videos right now... Sorry.
I solved my fan problem by taking a new fan and holding it against the bottom of the case about where the old fan is located. I then drilled two very small holes in the bottom case in the approximate area of the fan screws. I was then able to loosen the screws thought the holes and pull out the fan and install the new one. This saved me from removing the entire guts of the PC just to replace the fan. The holes make no difference to the PC. Thanks again for the video and your replies.
Just used this video this morning when I got stuck swapping out the HDD for an SSD: Gently pry out the HDD to remove it. BONUS! Found the SATA to laptop adaptor was removable and installed it on the new SATA SSD. Everything boots and works!😃👍🏻💻
Nice!
i used this video to help solve the notorious screen distortion problem that is common with this model, thanks a bunch mate
B Murf you are so welcome!
regazzz for future reference if anyone is having the same problem with lines distorting the screen, you need to follow this disassembly video all the way to the bezel removal, then look for a strip of aluminium tape that is stuck on the inside of the bezel above the screen power inverter, simply remove this tape and all your problems will go away, i cant for the life of me work out why its even there in the first place.
hello mate, i have an Acer Aspire 6930z and the Wifi LED i keep blinking on on and every few seconds when Wifi is turned on... is that normal ? or it should stay On, not blinking ?
***** Does the Wi-Fi card happen to be Broadcom by any chance?
If so you can disable blinking by editing driver inf file or in the registry change:
ledbh0 -1 to ledbh0 1.
B Murf
i think is Atheros man, but i'm asking if it is normal to keep blinking whern Wifi is On ? every few seconds it keep's blinking.... is my first Acer Laptop and i don't know much about Acer Laptop's... that's why i'm asking
Before i have had a HP and the Wifi LED stay ON
I have Acer Aspire - 874G32Mn manufactured 09/04 and I must say this serie is one the best cooling design in the world, Temp up limit does not exceed 80 degrees celcius even under full load for hours (stress tests). I am still using my laptop and really happy with it.
I was stumped trying to loosen a HDD from this model. In this video you did it so very fast I could not see just what move you made to loosen the HDD from its connection to the motherboard. I did try sliding it a little & nothing happened, was concerned not to apply too much leverage. I did notice about 6 screws were missing from around the HDD due to previous technicians most likely losing them. I have successfully removed and replaced HDDs from other models, but this one stopped me cold. Other than that, a great video.
I like it, but I was hoping you would have also shown how to replace the DC jack. I can't take it out from the plastic. I had another laptop with a similar plastic design, but that one came off easily. Do you have any suggestions on what I should try? Thank you!
GREAT!!! (I don't feel like a legend, but I am glad that this videos helping to fix a laptops!!)
You know what? What is that in the lower left of the laptop? It's empty for me, I've been wondering for years.
I answered my own question >.> I was using my flashlight and found a very small red latch on the inside and it pops the cover on the dc jack on the outside. It reveals two more screws that have to be taken out to continue the removal of the DC jack. Thank you again for the video! :D
Thank you for replying so quickly. You are right - my eyes played a trick on me - I see now that you did not simply remove the base cover of the computer but instead had to pull off the entire guts out of the base cover from the top. That means this is the only way to replace the little grey fan at 11:53. The screws to this fan are under the base cover of the computer. To get to the screws I would have to remove almost all the internal organs from the top. Wish there was a better way.
the metal doesnt slide out but I was able to take it out like you do it with that yellow object.
What's the secondary hard drive for? Sata2 drive doesn't seem to fit in
Hi thanks for the video - I need to replace the fan and the video seems to have edited out the part where you took off the bottom cover off the lap top. I took out all the screws from the bottom but no go. Do you remember how to get the bottom off?
I you think it is booting up you have at least feel a fan working, but you also can plug in an external monitor (don't forget to switch to external monitor) and than look will anything appear. If not than it is possible that gpu is dead. If will than LCD bad or cable is not connected.
Hello,
I think it can be used as a space for a second hard drive....
question... you didn't happen to look where the bluetooth connection on the mobo is did you? I know this model has the option by which i mean you can press that bluetooth light on the kb but that's about as much as it's going to work unless you get a bluetooth dongle. Just wondering if there's a connection thingymajig inside so I don't need to pick up the dongle.
hey bro, i have the same laptop, my problem is he is getting to fast hot, some people told me to open it and clean it, but do i have to take the keybord & screen to out to open the back of it?
hi great video i need to change the motherboard but can you tell wheat one i need or where the numbers are.
On mine the screen has started to flicker and the left half of the screen has gone dimmer to the right half. Would this be caused by the inverter and is it an easy enough job to replace the inverter?
Hey regazz, i'm desperate, please help me man... I dissasemble my Aspire 6930 to replace my CPU following your Video Guide and now when i power on my Laptop, everything is working except the iluminated Acer Logo on the Back Cover ...
How can i make it to light up again ? :((
Is the cable that you dissconnect at 6:08 responsible for the Acer Iluminated Logo ?
I appreciate if you can guide me please...
could you tell me what type of hard drive is in that acer im trying to order one, but im trouble finding it
Thank you so much.I want to renovation the cpu&gpu thermal paste. Do I have to remove screen the thermal paste when I renovation the cpu&gpu thermal paste ?
Pretty late answer, but in case someone else comes here and sees this: Nope, I didn't have to take apart the screen when I replaced the thermal paste a while back. But it was pretty rough! This laptop's build is pretty complex, have to pay attention to details and be careful when connecting connectors again.
i just need to replace the DC jack, any ideas on the fastest way? without a complete disassemble.
do you know if i can find the screen in mexico? i've been looking for a screen for months and my laptop stil works the problem is that i can't close it x.x (i have an Acer aspire 6935) thank you!
Thank youvery much!I have a problem with my hdmi port when by accident i pull the hdmi cable hard from the port and from then the hdmi port doesnt work! Can i replace the port? Can i find same port to fit? Thank you
Hi, do you know if there's a way to change the dc power jack? :( i opened the monitor just like the end of your vid, but i can't find a way to open that little capsule
unopezzo I remember this ridiculous design. It giving me a headache just by looking at this type of dc jack location.
First of all you will need to remove a Front Bezel (around 14:25) than you will have a better access to a dc jack. There should be some screw/s that are holding it.
regazzz great, got it! Thanks! I agree, it's absurd, much better soldering a new dc on the motherboard!
Thanks a lot, you helped a lot with this video.
help what is on the left bottom side , where its empty , i have this part missing what goes there if its not a hard drive thank you
ok but i need to remove my fan. i tried to open bottom and remove it but i can't do it. should i remove my keyboard to do it? isn't there any other way? because im afraid of damage my laptop
Hey I need to apply thermal compound onto my cpu and my question is do I really need to take apart the entire laptop to do it?
There are tons of places online where you can look for used or new laptop parts. Most popular I would say is ebay.
Yes, you will need to follow this video remove keyboard and pretty much everything I have done. Just keep in mind this is a take apart video. So, you don't need to disassembly an LCD to get to a fan :)
Hello,
"undercase" is a case bottom. This part is like a base and everything goes in to it. To replace a case bottom you will need to remove everything out of it.
Hi,the 250gb storage is built in the motherboard ? Because I see I have two partitions when I switch from hdd to sdd.
No, it is either two drives or one drive that has two partitions. Most likely one drive
@@regazzz well , the laptop had 1 hdd only and had like 100 gb of photos and videos. When i changed it to sdd the videos and photos were already in there but how because it was a brand new ssd.
Maybe another drive installed in the area of CD drive?
@@regazzz 8:40 on your video on the right side can be another drive?
@@MzQx watching on my phone, first comes to mind that maybe there is another drive in the location where I removed small door at 00:14? If not there, it could be only in CD rome and instead of CD rome. Because this laptop doesn't have an internal SSD or anything like that. Check that compartment and check if you have CD-rome / DVD rome there.
This is a great news! Sorry, I don't have time to answer questions right away, trying to keep up with all at once. Once a day! :) Anyway thanks for notifying!
thanks for the video master :) i need to clean my acer 6930g's fan so i opened bottom of it but i could not do it because there is a part that blocking fan. could you tell me how to clean fan or if you make a video for that it could be perfect
My wireless network card is broken, is it hard to change and where can I find it? Thanks
What model is your power drill? And what is that green tool called?
What did you take apart at 1:10? Do you know where the CPU and the GPU are and if they are easy to access? Also are they replaceable? Finally is the RAM hard to replace? Sorry for all the questions but thanks a lot! Nice video!
Hi, nice video.
I wanted to ask you ... do you know how to access the power jack of the pc?
I need to see if something is unsoldered or if I need to replace it ....
because changing the angle of the monitor the power disappears ....
Thank you
I wouldn't say it and learn how I would watch this video upto the point where I am removing the DC jack. Additionally I would check if the DC jack is actually removable or not. Video probably not the best choice specially on the phone or some small screen but you can search for Mobo on eBay and find pictures.
Simple search on eBay for "Acer 6930 DC jack" Can be removed. Just watch the video when I am removing on it and that's it.
@@regazzz Thanks for your answers ..... I just wanted to know if to get to the DC Jack I was forced to disassemble the display frame ....
hi,i have d same laptop with 4gb ram and it would b great if i could put in a
graphic card,
since there APPEARS to be slot for it ,can it be installed.
Hi,
I don't have this laptop anymore, so, can't make another video...
If you will watch this video, you will notice that the fan is easy to access, means easy to clean. Hold a fan blades (prevent from rotating it a lot) and use canned air to blow dust away.
would you please tell me if u know why my acer aspire 6930 wont display anything
. I think it is booting up, but it has no display
Hey man, the screen of my 6935g is broken. Well, not really the screen, but the lightning; it works but is dark as hell. I am indeed a little bit afraid of opening it, so I´d like to ask first; is it possible that the lightning isn´t broken and it´s just a loose cable? And if it is broken, can I fix it or is it better to buy a new screen? Thanks in advance!
Muy bueno , justo lo que estaba buscando!
Hi! Im from Argentina. I have the same Laptop and a few days ago the screen started flashing, but if I press in the middle of it, (in the Acer Logo) the screen stop flashing and the faliure stops. Is possible that the flex is not working ok? Or was loosened? Thank you very much!
Hello,
this way or another one, you will have to remove a palmrest first and usually motherboard.
Disconnect DC jack from motherboard and plug in new one.
Do you guys think it is posssible to access the fan if I only open the first big cover on the backside of the notebook? Or do I have to take apart the whole notebook till i have the motherboard? Because I want to clean my fan and renew the cooling paste for GPU and CPU.
Cheers
I rarely edit my videos, I pulled my archive with this video and there was no editing in this video.
At what part of this video do you experience some problem? (just give me a minutes where to look)
It will either automatically detect or you may need to press a comand fn+external screen, f8 I believe.
Let me know how it worked out on your laptop.
Thank you, your video was very helpful. Regards from México.
1.10 hard drive. At about 12.18 CPU (right one, removable) and GPU (left one glued/soldered) appear
For what is the spare room which located right under the o.s label?
i believe its for a second HDD but there is an aftermarket subframe piece you need to mount the hdd properly
Where is the graphics card located
Thanks so much bro, this helped me a lot, i cant even explain !
BloodyheadRamson you are so welcome! And actually if you want to explain - you can support my channel :)
hello mate, i have an Acer Aspire 6930z and the Wifi LED i keep blinking on on and every few seconds when Wifi is turned on... is that normal ? or it should stay On, not blinking ?
Hi, after my cooler has stoped to work, I ordered new one by amazon. After watching this video, I managed to replace the cooler by myself. All worked fine, but then the HDD started to get too hot and the laptop was just turned off. So I checked the temperature with some software and it showed me 50-51 °C. What's wrong with the HDD? What have I done wrong by assembling the laptop? Any ideas?
50-51 looks not that bad. Does hdd makes any clicking noise?
You are welcome! The problem is that it is not possible to remove a case bottom without taking everything out from inside. Case bottom is like a base where everything goes in. Yes, this is only a way.
Great job..the reason I watched this video is to see where the CMOS battery is ?? didn't see it..my 6930 will not boot and alot of people are saying to removing battery. any help would be appreciated
Some people do that too, it is a little bit extreme in my opinion, but it is also a way. :)
TY for that for sharing this great video with us and all the info... Really helpful
I love your screwdriver can you tell me the model so i can buy the same :D
Thank you
Hey man, this videos is a "take apart video" so, it is basically depend on a model of a laptop. Te remove a keyboard - you will not need remove a LCD, but in some laptops to remove a palmrest you will need to remove LCD, because it is blocking it. At the start you can remove a keyboard and try a canned air, in fan, but be careful, don't make it spin a lot, fan can be damaged.
Sir i have acer aspire 6930 and it has problem like it stuck on acer logo and when i press F2 then bios is not open what should i do .plz sir i also watch your this channel from lockdown . And also support it
I think it is a regular SATA hard drive.
can someone tell me what the little silver cap that holds and keeps the charging cord from wiggling is called? mine fell out somewhere and now my battery wont stay charging when i keep the cord in. I'm pretty sure its cause the cap thingy is missing.
I don't know what it's called, but I have the same problem with my 6920. Mine is still there, but loose and wobbling around. Affects the charging of the battery. It'll say that it's 100% charged, but then just frequently dies. I have to put something under the charger plug to jack it up at an angle to get it to charge. It's very old still with Vista on it. Still going strong. I don't know if the power jack needs replacing or if it can be just tightened. It seems like those silver caps are screwed on. Mine just sits on my desk and I never move it or abuse it. Seems like just opening and closing the screen just wears it out. But it is like 15 years old!
Is videocard replaceable?
Yes, it should be. I have Nvidia 9800m in mine
***** Yes. So much bolts, I even lose couple of them. But newer acer laptops more easier in disassmble, in my opinion.
Thank you very much this helped me out.
GREAT! You are welcome!
regazzz hello mate, i have an Acer Aspire 6930z and the Wifi LED i keep blinking on on and every few seconds when Wifi is turned on... is that normal ? or it should stay On, not blinking ?
Did you create an account today to tell that? :) Thanks!
Can someone please tell me if that laptops screen is LED/LCD/CCFL?? My one is cracked and i need to replace it. Thank you!
***** I just have this laptop for 1 week, and i want to know if is normal for the Wifi LED to keep blinking every few seconds... is should just stay On or is it normal to keep blinking while i'm connected through Wifi ?
I have recorded a video, take a look on my channel ...
*****
Thank you soo much man, i was worried, i thought my Unit is defective
CMOS battery located under palmrest
This laptop Intel core is.?
Nice video, yet the part I needed to put back together you didn't dissasemble. I took my laptop apart a month ago to replace power jack which is in hinge and now I don't remember how to put it back together!
thanks mate had to unplug the screen display cable
That's great!!! :)
nice one
First check on external monitor. If there is no problem, than try inverter... it is cheaper than screen...
You are right, that's why I grounded my leg and my table is grounded too. I just don't like this stupid cord hanging around.
Thanks a lot for this video
green tool is useless, it was sharp at the start, but after two laptops it was broken completely and not sharp enough.
Thank you!
Hey, this video is more than one year here :))
You are welcome!
bro, do you still have this laptop? or anyone else here has it?
+Killary Montena Nope, I don't, do you need some part for it?
sorry, no, I just need bios file (eeprom .bin file for wifi link card 5100 agn from it). I have app to extract it (20 seconds of job.)
i have one
but is the 6935G version
very useful
THANK YOU, i'll try to change the DC jack Power socket connector.
+aspis2000 remember all screws, where they are coming from. Have a good luck!
Any luck with this? I need to do it as well, do you really have to take apart the whole lid to replace it?
No problem getting this type of comments all the time, but surprised how many videos out there where people using nothing at all. I don't have this type of videos right now... Sorry.
i spilled ribena all over mine.... keyboards broken.. just need a new one?
sometimes simple cleaning can help, but usually not and need a replacement. Most important that motherboard will be alive.
Thanks man!
bravo ma manfano
Good. It should be same drive...
tanks for the help men :D
+Jhann Neblina P you are welcome!
I would look on ebay, from us it will be shipped fast.
no problem!
Good thank
this is a different laptop, at least on the picture and motherboard is different.
Nope, motherboard wasn't shocked I used in some other laptop and it was working.
no I don't, sorry. Usually you can buy it together with cable.
Merci trop fort :demontage à la visseuse et couteau suisse 😁💪
Thabks
thank you, very mach )))
Thanq❤👍