ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
I Beam - Lateral Torsional Buckling Test
ฝัง
- เผยแพร่เมื่อ 4 เม.ย. 2019
- Lateral torsional buckling occurs when an applied load results in both lateral displacement and twisting of a member. You can see the first part of the video shows bending of the I beam and then it starts to buckle i.e. lateral displacement and twisting.
📲 Download my RC Section App 📲
apps.apple.com...
▶️ Watch Eurocode 3 Series
Part 01 - Introduction to Eurocode 3: • Introduction to Euroco...
Part 02 - Introduction to Eurocode 0: • Introduction to Euroco...
Part 03 - Eurocode 3 Structural Analysis: • Eurocode 3 Structural ...
Part 04 - Brittle Fracture: • Brittle Fracture | Eur...
Part 05 - Cross-section Classification + Buckling: • Cross-section Classifi...
Part 06 - Steel Beam Design - Bending + Example: • Steel Beam Design - Be...
Part 07 - Steel Beam Design - Shear: • Steel Beam Design - Sh...
Part 08 - Steel Beam Design - SLS: • Steel Beam Design - Se...
Part 09 - Introduction to Lateral Torsional Buckling: • Introduction to Latera...
Part 10 - Design Buckling Resistance Moment: • How to Calculate Desig...
Part 11 - Design Buckling Resistance Examples: • Calculation Examples o...
Part 12 - Steel Column - Compression Member Design: • Steel Column Design | ...
Part 13 - Steel Column - Buckling Resistance: • Steel Column Design | ...
Part 14 - Steel Column - Buckling Example: • Steel Column Design - ...
Part 15 - Tension Member Design - Fastener Design: • Steel Tension Member D...
Part 16 - Tension Member Design - Connections: • Steel Tension Member D...
Part 17 - Axial Compression, Bending, Torsion: • Steel Member Design | ...
Part 18 - Bolted Connections - Pinned & Fixed (Rigid): • Steel Connections | Bo...
Part 19 - Welded Connections - Pinned & Fixed (Rigid): • Steel Connections | We...
🔔 Connect with Dilakshana Mayadunne 🔔
Facebook.com/IamDilakshana
IamDilakshana
LinkedIn.com/in/Dilakshana/
civil_structural_engin
www.dilakshana....
Join Linkedin group (Design to Eurocodes) 👉🏻 / 9004030
Join Facebook group (Let’s Talk Civil Engineering) 👉🏻 / civilandstructuralengi...
#IBeam #SteelDesign #LateralTorsionalBuckling
Disclaimer: This material is provided on an 'as is' basis without warranty of any kind. There is no warranty that the material will meet your requirements, that the material is error-free, that results obtained from the use of the material will be reliable, nor that any errors in the material will be corrected.
Attribution:
Video - Lateral Torsional Buckling Test by Faculty of Civil Engineering RWTH Aachen University (www.fb3.rwth-aachen.de) is licensed under CC BY 4.0 (creativecommon.... Original video was edited.
Music - Sleeplessness, The Brothers Records - / @donguyrockwell
Thanks. It was very hard to visualise this phenomenon prior to seeing your video. Keep up the good work.
Muthomi Munyua Glad you found it useful.
Thanks for showing it practically.
shivam sharan lall 👍🏻
Can you provide the size and span of the beam as well as the exact location of the load along the length (assuming it's at midspan right now)? I'm curious how this compares to AISC equations.
As an Engineer, i recommend you test beams for bilateral contortional buckling and collateral torsional flexure. These are not very well understood failure modes.
Thx, the bolts and welds jointing vierendeel floor trusses with the columns of WTC towers didn't fail because of excess loading ,softening from heat or linear expansion resulting from planestrike alone
I hoped to see this test reac catastrophic failure
what value of load have you taken as the critical buckling load?
I have a question.
Here, is I-Beam subjected to a positive bending moment?
Very good and funny videos bring a great sense of entertainment!
How the graphs are get plotted in real time? Is it done by the apparatus it self?
If you want detailed graphs then you can use a kit with digital force & displacement sensors (simultaneous) connected to a computer. These sensors normally come with software that plots the graphs.
lol now i know that there's also plastic strain after lateral torsional buckling..
btw may i know:
a. the steel profile size
b. the distance between support
c. the condition of support (confinement)
Support condition seems semi-rigid
Are u from sl?
Yes, I am.
Pls tell me the name of the apparatus used
This testing rig is comprised of moveable hydraulic jack (allow for the lateral shift) and support units with degrees of freedom to facilitate the lateral torsional buckling test.
can u tell me the name of apparatus used
This testing rig is comprised of moveable hydraulic jack (allow for the lateral shift) and support units with degrees of freedom to facilitate the lateral torsional buckling test.
Can someone tell me if vertical stiffeners would help in this case at all? Or do they help against local buckling only?
@@19Borneo67 thank you for a very detailed answer. You helped me with my question greatly.
Thank u so much
Most welcome.
From Brazil. What is the dimensions of this steel beam? W150x13.... W200x...
Hi - This is a 330x160mm steel beam
@@IamDilakshana Thanks very much. Please ...the length...
UZIAHH SOARES You’re welcome. Beam length is 6.2m.
@@IamDilakshana the load was applied on the beam with what distance from the pin? Is that pin holed on supports?
Marcos Ferreira Load is applied approximately 1.86m from the nearest support which is a spring with a spring stiffness of 40430kNm/rad.
I tried to replicate this test in the Software Ansys Mechanical, if someone want to know more about this, reply this coment! =)
Please share more. What are your findings? Can you extract a video from Ansys?
@@IamDilakshana Using the conditions:
- 330x160mm steel beam;
- 6,2m
- Force aplied 1,86m from nearest pin
- Spring stiffness: 40430kNm/rad
I found a Force limit of 160,89kN to buckle! Very close to your test! I'll try to make a video soon
Just brace them.
I beam is not good
Box sec and C chanel BTB is good