Firing up my Primus 71 and Optimus 80 Stoves

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ส.ค. 2024
  • In this video I talk about firing up my Primus 71 which I did but not on camera because of a weak flame but I do show a successful firing up the Optimus 80.
    A look at my collection:
    • My Primus 71 Stove Col...
    Stoves and Burners Playlist:
    • Stoves and Burners

ความคิดเห็น • 39

  • @billf8217
    @billf8217 4 ปีที่แล้ว +5

    I really appreciate this video. When I was a kid, my dad had one of these, and I loved the way it sounded. Thanks for posting.

    • @billf8217
      @billf8217 4 ปีที่แล้ว +1

      PS I'm intrigued by your opening logo video.

    • @planetsideagent
      @planetsideagent  4 ปีที่แล้ว

      Thanks

  • @athomasbom6295
    @athomasbom6295 3 ปีที่แล้ว +1

    Really fun to see how little has changed between this and the Svea 123R

  • @19eightyforeisnow
    @19eightyforeisnow ปีที่แล้ว

    Just found this and the 81 in a freebox in fairbanks ak, both work but i couldnt figure out how, until now, greatlittle stoves..thanks for the tutorial.

    • @planetsideagent
      @planetsideagent  ปีที่แล้ว +2

      Great find! Those stoves are hard to find and getting more expensive every day. Take care of it 🙂

  • @thomassimpson8552
    @thomassimpson8552 4 ปีที่แล้ว +1

    Great stoves. Would love to see some more wood gas stove videos if possible!👍

    • @planetsideagent
      @planetsideagent  4 ปีที่แล้ว

      I currently don't have any wood gas stove videos in mind but you never know.

    • @thomassimpson8552
      @thomassimpson8552 4 ปีที่แล้ว

      @@planetsideagent All good i just love how great they look when they burn.

  • @charlietango1635
    @charlietango1635 3 ปีที่แล้ว

    I clean and restore these stoves like the svea 123 and 123R along with the 8R and 111, 111B etc, and I found the safest way to get the spindle assembly off the tank is to take the bell off, fix in the corner of the bench vice with jaw protection and turn the tank slowly, try to tighten the tank just slightly before unscrewing it, that way you avoid rounding off the nut. just my opinion.
    P.S. sounds like the jet is a bit dirty, or it is starved of vapour.
    ATB Ray

  • @DzizsKrajs
    @DzizsKrajs 4 ปีที่แล้ว

    nice video thank you for upload. Today just bought one for 3O bucks and looking forward clean it and refurbish tin :) Would like keep this stoves for next genereations. The need to see the last proper fighters !

    • @planetsideagent
      @planetsideagent  4 ปีที่แล้ว

      Cool, that's a good buy. its old tech but they still work great.

  • @73FORGE
    @73FORGE 4 ปีที่แล้ว +1

    Thanks for the video! What alcohol for the warm up did you use, and what would you recommend for the burn? Much appreciated 👍🏼🍺

    • @planetsideagent
      @planetsideagent  4 ปีที่แล้ว +2

      To prime I use Heat in the yellow bottle but denatured alcohol also works. For fuel I use Coleman fuel also called white gas or Naphtha

    • @charlietango1635
      @charlietango1635 3 ปีที่แล้ว +1

      Mentholated spirits for priming

  • @supercomp7078
    @supercomp7078 ปีที่แล้ว

    I made a pentagram key from a slightly over size allen key, I think from memory 3 sides of the allen key were a perfect fit and 5 minutes with a good file were all that were needed to make the other two sides fit, I don't think they are a perfect pentagram

  • @sanborns
    @sanborns 2 ปีที่แล้ว

    Nice Collection ...

  • @sakakibaranoriyuki3945
    @sakakibaranoriyuki3945 3 หลายเดือนก่อน

    青くてきれいなブリキの箱が焦げるのがもったいなくて、もっぱら観賞用にしています。

    • @planetsideagent
      @planetsideagent  3 หลายเดือนก่อน +1

      本当にそうですね。私はそれらを長く稼働させたり使用したりはしませんでした。それらは単に展示用です。🙂

  • @alvarokerosene6257
    @alvarokerosene6257 4 ปีที่แล้ว

    Maravillosa pieza !

  • @eagleeyeswings2863
    @eagleeyeswings2863 2 ปีที่แล้ว

    what is the type of gaz or fuel ? this is nafta ?

    • @planetsideagent
      @planetsideagent  2 ปีที่แล้ว

      Yes, NAFTA, aka white gas, Coleman fuel.

    • @eagleeyeswings2863
      @eagleeyeswings2863 2 ปีที่แล้ว

      @@planetsideagent ok . i have primus optimus 71. i never use . tank you for information

  • @christandaugherty1290
    @christandaugherty1290 2 ปีที่แล้ว

    Where do u get the fuel and what kind of fuel does it take

    • @planetsideagent
      @planetsideagent  2 ปีที่แล้ว +1

      It uses white gas also known as naphtha and Coleman fuel.
      Any sporting goods/camping store should have it.

    • @christandaugherty1290
      @christandaugherty1290 2 ปีที่แล้ว

      @@planetsideagent Thank you much appreciated

  • @eagleeyeswings2863
    @eagleeyeswings2863 2 ปีที่แล้ว

    this is friction alcool ? or methanol ?

    • @planetsideagent
      @planetsideagent  2 ปีที่แล้ว

      For priming I use Yellow bottle “Heat” alcohol but any alcohol will work, denatured or meth.
      You can also use the stove fuel to prime but It creates a lot of soot. Alcohol burns clean.

    • @eagleeyeswings2863
      @eagleeyeswings2863 2 ปีที่แล้ว

      @@planetsideagent ok tank you sir

    • @dorelcristian5769
      @dorelcristian5769 11 หลายเดือนก่อน

      Eu am una suedeză originala scrie pe ea nur fur benzin ctr8 și zgâriate pe spate 1943 Graz soldat OTTO KELNER

    • @dorelcristian5769
      @dorelcristian5769 11 หลายเดือนก่อน

      Made în Sweden

  • @vovapantera1646
    @vovapantera1646 2 ปีที่แล้ว

    I wonder if the fuel is leaking out of the nozzle. if you carry a primus in a backpack?

    • @planetsideagent
      @planetsideagent  2 ปีที่แล้ว

      They seem pretty tight, you might get some leakage from large elevation gains.
      I'd wrap the stove and fuel bottle in a plastic bag (bread bag) if for no other reason to keep the gas smell from permeating your pack contents. If your pack has outside pockets I'd carry the stove and fuel there.

  • @vovapantera1646
    @vovapantera1646 2 ปีที่แล้ว

    And how much fuel is placed in the fuel tank, and how long does it burn at full refueling?