Awesome stuff, sir! I hope mine comes out half as cool. I have been messing with the concept almost two years without taking the time to assemble it. I have an Artifact kit from 2 years ago, and some Aussie Turf Springs. But mine will be in an XZEUS2 shell. I also plan on doing a Jet Omni kit inside of a Longshot as a lower fps LS option.
I really like that front part of the barrel etc. Mine has a deploy stock and I currently use the Nerf flash suppressor thingy. Same pump grip. Needs a bit more tuning as well but works a treat. Can't wait to try it at AW.
If you are going to upgrade the spring, you’ll probably need to extend the barrel because the one that comes with the kit is too short to handle anything more than like a 10 kg spring. I know that monkeemods has started to sell longer barrels for the Worker/arftict half dart-kits and those and they can probably handle the 18,5 kg turf spring if you wanna use that.
That's amazing. I just acquired my first longshot recently at Goodwill and I want to get those parts for it so I can have an up-to-par longshot. Keep up the great work Captain!
Make sure to buy a spring that isnt worker, their longshot springs are MUCH weaker than most brands and turf is by far the best. Also with a higher springload a longer barrel would be needed.
Great build as always Captain! For the scope you could do the ribs on the front orange. It would break it up perfectly! (Ps you got me on the edge of my seat thinking you had a new give away contest at the end there 😉)
I gotta say. I do think its pretty funny that you painted the black pump grip and stock orange, when you can order them orange. It probably matches better though.
Been wanting to upgrade my own longshot for ages, and you just tempted me into it. So I ordered a stage 1 and stage 2 kit to get me started, something about clearance sale. as always, love your channal and I hope to see my fan build at some point in the future. :)
Ya a new vid!What I think is funny is that I've been watching this channel forever (Since 2017) and Ive just subscribed realising I'm missing all this goodness
Was that a squeal of delight or fear at 5:42? It sounded somewhat involuntary. Also for the scope I would suggest using a paint brush as opposed to a spray paint can.
A few questions about a mod project of mine: What needs to be done to make a Longshot capable of high spring loads? How much can a Longshot be minimised? Is there anything with a Retaliator form factor that is K26-able?
At the very least you need a metal catch plate. If you go high enough you will need a pump kit of some kind and a metal boltsled. for insanely high spring loads there are parts of the shell that need reinforcement. You can remove the stock and a good portion of the barrel. Also the top rail and bipod. And yes, the BuzzBee Champion and the BuzzBee Reaper both can take k26.
@@CaptainXavier Thanks for the reply you are always helpful with questions like this. Perhaps some day if I get off my lazy *** you'll see something out of this advice.
I love the design of the ZS Longshot, but why did they have to remove the only comfortable spot for your hand on the blaster? And why give a sniper rifle a twelve rounder and the lever action a six mag?
Just got a longshot myself, my first ever, so I'm thinking of k26ing it and that's it. I can't afford a pump kit, or any of the other nice kits, any suggestions?
@@CaptainXavier I have a upgraded catch spring, material to pad the plunger head and polycarbonate supports for the mounts, do you believe that would suffice?
i have a question can you replace the rubber bit of a nerf dart with an earplug like one of the foam ones because i dont know why not. luv your vids and p.s how would it work? i hope this will be on the QnA and fanmail video srry if u already saw this comment i put it on the wrong video... soooo yea
Hey cap I have a idea nerf could use for a 300 dollar rival blaster considering they continue there OP rival guns it could be a 300 round full auto hopper fed fly wheeler with the same rate of fire as the Prometheus and the same rechargeable battery and could be a double barrel that's meant to be planted up so basically it's a rival version of the rhino fire and they should name it Hercules
Can you do a monday mod tips for making a masterkey with a Magnus? I also had an idea to use a thunderblast as a modular underbarrel launcher since it is supposedly more powerful than the demolisher's launcher. Also cool Longshot Battle rifle.
That is not a Mod Tip. That is a build guide. And it really is just: Cut off handle, cut down the slide, attach to barrel. Same for the Thunderblast. Cut off the handle and stock, attach to barrel.
Probably...I mean...we have made spaceships and self-driving cars...so I can't imagine why a Nerf blaster that does what other Nerf blasters can do would be impossible... ;)
I've never seen the point of turning a bolt action sniper rifle into a pump action gun, just never made sense to me even looks wise. If I ever get a longshot and upgrade it I won't be turning it pump action.
Then you won't be able to use a very heavy spring. Or you will have to prime it very awkwardly with both hands on either side of the blaster. The pump grip is not just for looks. It provides even pressure on both sides of the boltsled. Uneven pressure can jam or break the sled.
A bunch of places. NFstrike, Banggood, Lightake, Workerkit, Ebay, Germany, Etsy. And it depends who is buying the Vulcan. I wouldn't pay more than $8 for a Vulcan. Someone else might pay $50.
I heard "turf blaster spring" as "TERF blaster spring" for a second. So I'm just imagining flinging foam at TERFs so they go away. You wouldn't really want transphobes at your Nerf war.
![[Review] Worker Metal Longshot Kit](http://i.ytimg.com/vi/UbUKpJYxGlA/mqdefault.jpg)
Awesome stuff, sir! I hope mine comes out half as cool. I have been messing with the concept almost two years without taking the time to assemble it. I have an Artifact kit from 2 years ago, and some Aussie Turf Springs. But mine will be in an XZEUS2 shell. I also plan on doing a Jet Omni kit inside of a Longshot as a lower fps LS option.
It is here, and it is wonderful
This is the most amazing longshot I've ever seen! Thanks for giving me the inspiration to try modding thanks for the great vid man
I really like that front part of the barrel etc. Mine has a deploy stock and I currently use the Nerf flash suppressor thingy. Same pump grip. Needs a bit more tuning as well but works a treat. Can't wait to try it at AW.
If you are going to upgrade the spring, you’ll probably need to extend the barrel because the one that comes with the kit is too short to handle anything more than like a 10 kg spring. I know that monkeemods has started to sell longer barrels for the Worker/arftict half dart-kits and those and they can probably handle the 18,5 kg turf spring if you wanna use that.
That's amazing. I just acquired my first longshot recently at Goodwill and I want to get those parts for it so I can have an up-to-par longshot. Keep up the great work Captain!
Make sure to buy a spring that isnt worker, their longshot springs are MUCH weaker than most brands and turf is by far the best. Also with a higher springload a longer barrel would be needed.
Thank you!
Would you be willing to put links in the description for all the parts that you used in the final version of the build?
They are available wherever Worker Parts are sold. NFStrike, Lightake, Banggood, WorkerKit, Ebay.
Awesome video captain.
18.5 Turf Is The Truth!!
Great build as always Captain! For the scope you could do the ribs on the front orange. It would break it up perfectly! (Ps you got me on the edge of my seat thinking you had a new give away contest at the end there 😉)
I gotta say. I do think its pretty funny that you painted the black pump grip and stock orange, when you can order them orange. It probably matches better though.
Been wanting to upgrade my own longshot for ages, and you just tempted me into it. So I ordered a stage 1 and stage 2 kit to get me started, something about clearance sale. as always, love your channal and I hope to see my fan build at some point in the future. :)
That looks so much like an MK-14 EBR!
Vismod comes back to an Accuracy International AS50
Ya a new vid!What I think is funny is that I've been watching this channel forever
(Since 2017) and Ive just subscribed realising I'm missing all this goodness
Captain on deck *salutes*
That's the most beautiful thing I have ever seen
Was that a squeal of delight or fear at 5:42? It sounded somewhat involuntary. Also for the scope I would suggest using a paint brush as opposed to a spray paint can.
Both.
Knew you would do one of these eventually
A few questions about a mod project of mine:
What needs to be done to make a Longshot capable of high spring loads?
How much can a Longshot be minimised?
Is there anything with a Retaliator form factor that is K26-able?
At the very least you need a metal catch plate. If you go high enough you will need a pump kit of some kind and a metal boltsled. for insanely high spring loads there are parts of the shell that need reinforcement.
You can remove the stock and a good portion of the barrel. Also the top rail and bipod.
And yes, the BuzzBee Champion and the BuzzBee Reaper both can take k26.
@@CaptainXavier Thanks for the reply you are always helpful with questions like this. Perhaps some day if I get off my lazy *** you'll see something out of this advice.
that looks amazing!
Very Nice
It looks great
The mag release looks super cool
Wait a sec. CAPTAIN XAVIER HAS A LONGSHOT?!
Not sure why you're surprised, he has everything you could possibly want, really
Sir I feel you've made your content to enjoyable. What the hell are we supposed to do if you ever stop making videos.
I have a long shot, but i dont have the trigger for the front gun and i dont have a lot of attachments.
Im also a fan of the longshot
Could you show how to make a tri break shotgun?
Has anyone successfully done that? Because my initial guess is that it would not work well at all.
Captain Xavier you could try?
@@snusankatt he could try but it might be a wreck nor that i mean he does bad work it is just a very complex build
Well it's Captin Xavier he'll just put a titan tank onto it of make elite converter things to fire elites.
Im no expert by any means, but wouldnt removing the ARs accomplish that?
Love your work
Thanks!
Add some orange to the stampede bi pod
does anyone know if a stock longshot boltsled would work with a 16 kg spring?
For a little while, maybe.
Hey cap where did you get the mag release I’m building a longshot currently and being a leftie is love one for it
Thingiverse. Link should be in the description.
Nice job cap
Love it man
And I thought the longshot shell could never look good,
I stand corrected!
Love it
I love the design of the ZS Longshot, but why did they have to remove the only comfortable spot for your hand on the blaster? And why give a sniper rifle a twelve rounder and the lever action a six mag?
Because Hasbro.
To save money.
@@CaptainXavier Those capatalist spies...
it looks pretty
Nice. Have you ever considered full metal internals, like metal plunger tube, trigger and plunger rod?
Nope. Most of these parts were sent to me for review. They did not send those parts and I don't see enough need for them to buy them.
Yep, fair enough. Cheers for the vid mate.
IT LOOKS SO BEAUTIFUL!!!! OMG!!!
If you can get the materials and tools I could help with casting metal parts
Oh good. He has a rival minigun, and an anti-material rifle. Nothing will go wrong-
Wait till I get around to building that Nerf Howitzer...
Just got a longshot myself, my first ever, so I'm thinking of k26ing it and that's it. I can't afford a pump kit, or any of the other nice kits, any suggestions?
Without addition parts you won't be able to k26 it. K26 is too heavy for stock internals.
@@CaptainXavier I have a upgraded catch spring, material to pad the plunger head and polycarbonate supports for the mounts, do you believe that would suffice?
@@VFEDavidMiller thanks, I guess I'm screwed because I have almost no budget for this project, guess I'll just stick to my singled big bad bow.
glorious
Very neat
Try the xzues2 and paint it in the reverse colors of your ls, orange with black stripes
if it doesnt have an air tight seal your doing it wrong lmao
I prefer the low profile pump grip
That end tho
you deserve an award
Awesome
i have a question can you replace the rubber bit of a nerf dart with an earplug like one of the foam ones because i dont know why not. luv your vids and p.s how would it work? i hope this will be on the QnA and fanmail video srry if u already saw this comment i put it on the wrong video... soooo yea
Probably. Now sure how well it would work though.
Hey cap I have a idea nerf could use for a 300 dollar rival blaster considering they continue there OP rival guns it could be a 300 round full auto hopper fed fly wheeler with the same rate of fire as the Prometheus and the same rechargeable battery and could be a double barrel that's meant to be planted up so basically it's a rival version of the rhino fire and they should name it Hercules
I dig it.
Sounds sweet!
What is the FPS on that. I would like to see one with katakana mags
Ich Love this build i waited a long time for a nice logshot build really nice Video U r Thema best Nerf Modder!!!!!!!!
Sooooooooo good
Can you do a monday mod tips for making a masterkey with a Magnus? I also had an idea to use a thunderblast as a modular underbarrel launcher since it is supposedly more powerful than the demolisher's launcher. Also cool Longshot Battle rifle.
That is not a Mod Tip. That is a build guide. And it really is just: Cut off handle, cut down the slide, attach to barrel. Same for the Thunderblast. Cut off the handle and stock, attach to barrel.
Yo what ever happened to that lancer that you were making
Nothing.
Need a cemturion thumbhole stock integration
Hello viewers have a nice day
You are amazing
Cool
Neat
Share a link to the lower profile pump kit?
www.lightake.com/p/Worker-F10555-No.187-Pull-down-Kits-Style-B-for-Nerf-N-Strike-Longshot-CS-6-and-Nerf-N-Strike-Elite-Longshot-CS-6-Black_2463551.html
@@PltOffPPrune thank you sir.
@@CaptainXavier Thanks cap
👍
Het Xavier you should do a G36 stryfe mod and re-wire it to make it full auto
Nice I’d build one but I don’t have money
But can it take a k26
...yes...obviously...
@@CaptainXavier that reply made my day
Most springs people use for serious Longshot builds are actually heavier than k26.
Um, isn't there a spot in the description saying that you aren't accepting commissions?
He posted a video yesterday saying he's taking commissions again you should go watch it so you know how to apply for it
First: How did it take me so long to find this?!?
Second: It looks like it could take full length darts, why can't it?
The bolt for the sealed breach won't allow full darts to feed.
@@CaptainXavier elaborate plz (i dont understand)
Big darts no fit
@@CaptainXavier I understood that part, but why dont they? Does the bolt extend to far on a closed breach?
What spring do you recomend for 120 fps?
Depends on the rest of your build.
*WOUNDERVAR*
Long barrel causes decrease in range
Only if you don't have enough power.
Can you make a tri beak shotgun shell loading.
Probably...I mean...we have made spaceships and self-driving cars...so I can't imagine why a Nerf blaster that does what other Nerf blasters can do would be impossible... ;)
Look it's a cooler much better longshot than mine lol
I've never seen the point of turning a bolt action sniper rifle into a pump action gun, just never made sense to me even looks wise. If I ever get a longshot and upgrade it I won't be turning it pump action.
Then you won't be able to use a very heavy spring. Or you will have to prime it very awkwardly with both hands on either side of the blaster. The pump grip is not just for looks. It provides even pressure on both sides of the boltsled. Uneven pressure can jam or break the sled.
What printer do you have?
Afterburner! Lol
How much would you sell one for
Cost of Parts x2 + shipping.
Ok thanks
Where did you get the parts from. How much would sell a Vulcan four
A bunch of places. NFstrike, Banggood, Lightake, Workerkit, Ebay, Germany, Etsy.
And it depends who is buying the Vulcan. I wouldn't pay more than $8 for a Vulcan. Someone else might pay $50.
How much would you sell me one and thank you
What FPS does it hit?
Depends on what spring I put in it.
What spring do you run on it most of the time? By the way, the build looks absolutely fabulous
What fps does it hit? :)
Depends which spring you put in it.
i have a modded longshot, but take away the longshot and modded part
the worker barrel is shit (inside surface finish is suboptimal) and also too short
I heard "turf blaster spring" as "TERF blaster spring" for a second. So I'm just imagining flinging foam at TERFs so they go away. You wouldn't really want transphobes at your Nerf war.
Indeed not.
Hi cap
hi
Hi
hi
Who disliked the video
I’m finally early!
Connor Bowersox I am not
How do u get ur vest for load out
By giving money to someone selling one...
25th comment