Brian, I seriously thought you were going to bring out that Amazon cordless thing from last night. LMAO! As I'm sitting here laughing, I wonder what that thing would do in comparison to the Rupes? Hahaha! Thanks Brian! Very impressive.
Does this combination have enough cut to prep my car for a reapplication of ceramic coating. Applied kamakazi 3 years ago and can coat evo a year ago. Still seems to be holding on pretty well but want to change coatings before winter.
I was doing a car yesterday and I notice something. Same pad, using sonax cutmax. No swirls were coming out. It's dawned on me that I was using a 15 polisher. The compound fished out no different from the sonax polish. It's super shiny but all the swirls are still there. Should I buy a 21 or a rotary? I also tried microfiber pad, stiff foam pad. It struggled to remove 3000 grit sanding marks and absolutely did not remove 2000 sanding. Ended up having to sand to 5000. I don't have a huge budget so looking for help with a purchase that's gonna get me better results and not break the bank
I will ship it to you....may take some time. But just make an account and go from there....apexsurfaceprotection.store/collections/blue-collar-by-apex-surface-protection/products/bc-2-ceramic-coating-spray-1-year-4-oz
I have been using, at your recommendation, in the past, 3D1 for quite some time, with very good success. How does Papa Cut compare to 3D1? Also, I have been using The Last Coat for the Si02 sealant. In your opinion, how does the Last Coat compare to Blue Collar 3? Always enjoy your excellent videos!
It’s all about how much pressure you put on the DA polisher and how fast you go. I will do the 2 pass method with pressure to cut and then do another pass with zero pressure and go a little faster to finish when using 3D One. I’ve also used The Last Coat 2 in the past and it performs well. I also use Ethos Resist Graphene spray with great success.
Great turnaround! Question: a car was in the garage and l.e.d. light fixture shorted out and circuit board inside caught fire. Plastic melted, and plastic dripped onto roof. Put out fixture fire with extinguisher. How to remove melted plastic and fire extinguisher propellant safely? Thank you Brian!
This Team/Combo is fast and effective and will cut down on time working on your cherished ride.....so you can ENJOY it more!!! Cheers!
Is there a shelf life on BC3? Also can I use BC 1 on windows?
10/10
@@Amor1990up to a year and beyond. Can easily be used on glass
Amazing transformation Brian. Patience and the right products get it done.
The Urofiber 50/50 is your friend.
Shine on you crazy diamond!
Right on!
Thanks for the video Brian. As a bc3 user , it would be good to see what the gloss numbers were after polishing stage and then after bc3
“Buff to perfection” and “bring you in close”…consistent, professional, and authentic. Nice results, well done, thanks Brian! 👏
Wow what a difference!
Nothing better than watching your videos while sipping on a couple cold ones at night Brian
Cheers!
Loving the BC product line on everything I’ve used them on !
Awesome job Brian. Your videos always inspire others to perfect their cars finish. Keep up the good work brother!!
This is a combination which will always work. I highly recommended buying these products!
BC3 is an awesome product. I’m not one for topper sprays on coated cars but this stuff is the only one I’ll use anymore.
Wow quite the turnaround! Nice!
I did the same process but used 3D one with a microfiber pad then the BC3. Beautiful job
I can't wait to finally get my car over to you. Only time and live events have kept me from having you work on my car. I live over in Harrisburg.
Howdie neighbor!! We would be honored to have you stop in!
This confirms my purchase of BC3, thanks Brian 👏 👏 👏
Enjoy!!
Brian, I seriously thought you were going to bring out that Amazon cordless thing from last night. LMAO! As I'm sitting here laughing, I wonder what that thing would do in comparison to the Rupes? Hahaha!
Thanks Brian! Very impressive.
That is probably best for just spreading wax or sealants or maybe the Nano Scrub system.
Great work! Papa cut is fantastic and BC -3 is one of my favorites !
Thanks for including single stage paint.
That's damn impressive!😮😎
that is really impressive brian, great video.
Cheers Brian, another great educational video 👍👍👍🇬🇧
Those Urofiber pads have been a regular star in your shop videos, good to see them paired with great products giving super results
Even though the quality has fallen off just a bit....we still favor them.
Thanks for another great video Brian, awesome results.
Fantastic turn around. Great choices 4 products.....😆😆
Does this combination have enough cut to prep my car for a reapplication of ceramic coating. Applied kamakazi 3 years ago and can coat evo a year ago. Still seems to be holding on pretty well but want to change coatings before winter.
Another awesome video Brian , can’t go wrong with any of the products showcased. Huge fan of the BC line they give great results.
I can't say enough about BC 3. I have used it on bird poop and the occasional bug splatter also.
Can u use a microfiber disk? Or is the 50 50 pad better
I was doing a car yesterday and I notice something. Same pad, using sonax cutmax. No swirls were coming out. It's dawned on me that I was using a 15 polisher. The compound fished out no different from the sonax polish. It's super shiny but all the swirls are still there. Should I buy a 21 or a rotary? I also tried microfiber pad, stiff foam pad. It struggled to remove 3000 grit sanding marks and absolutely did not remove 2000 sanding. Ended up having to sand to 5000. I don't have a huge budget so looking for help with a purchase that's gonna get me better results and not break the bank
Looks awesome Brian!! Can’t wait to get time to do mine.
Great combo and results!
Always great watching your video all the way from South Africa. Thank you for all your videos and transfer of your knowledge. How do we get bc3?
I will ship it to you....may take some time. But just make an account and go from there....apexsurfaceprotection.store/collections/blue-collar-by-apex-surface-protection/products/bc-2-ceramic-coating-spray-1-year-4-oz
Did bc3 decrease the gloss at all after the polish stage?
Perfect combination 👊🏼Brian 🛞
Very interesting video as always Brian!! Would you use BC3 on top of a nice carnauba wax?
The opposite would be best.
How can you tell if it's hard or soft clear coat
Great 👍video buddy tfs
I use the same combo with 3D One and a UroFiber 50/50 pad. Then I use your BC1 for protection. I also use your BC5 for the glass!
Good choice!!🙂👍
Quick question here.. what is your go to panel prep..
Gyeon Prep....hands down. www.amazon.com/s?k=gyeon+prep&camp=1789&creative=9325&linkCode=ur2&linkId=fcd236fa40cd473271b8d80f8ab80010&tag=apexdetail-20
Brain love your videos. How do know if you are working with soft or hard paint?
Multiple test areas will always reveal what you are working on. I always do 2-3 test areas.
I use this today was very green and blue looking do I need to shake it up to make it back rite
Shake all the products before use … mix in that rich formula.👍🏻
just ordered for my Chevy Silverado thanks
Enjoy!
2020 Silverado what hardness is clear coat? I bought the pad also to use on flex orbital thanks
Is Papa cut, similar to 1 and done?
Similar indeed.
Shoo Mgr doesn't like being ignored!!!😆😆
Awesome video and content good friend
Thank you 👍
Amazing ❤❤❤ I love papa cut and fabulous polish.. that’s the newest papa cut correct. I have the older one. But wow 🔥🔥
V2😁👍🏻
BC3 works great on my truck and bike.
Right on
Brian, I don’t have any Papa cut, but would 3D One paired with your BC3 produce these same results? Thx
I believe that would work just as well.
Cheers Brian!
Can I apply a SiO2 or graphene sealant say after 3 hours for an additional coat of protection?
BC3 plays well with most products … should be no problem.
Brian, have you tried out the new Angelwax Resurrection EXTREME? Should make it to the top podium of the Cutting Compound Series.
I have it on my list.
How does Papa Cut compare to 3D ACA 510
Closest to 3D One.
You list a shinemaster EB351 obital as the tool you used.. You were using a rupes forced rotation mille ???
Looks like a free spinning DA to me.
My apologies… this one.
www.lenosgarage.com/products/rupes-dual-action-polisher-lhr15mk3
EB351 polisher? I saw a Rupes in your video.
My apologies… this one. www.lenosgarage.com/products/rupes-dual-action-polisher-lhr15mk3
So many new products introduced within the past three years. It is very difficult to decide on which one to use for gloss and shine.
I have been using, at your recommendation, in the past, 3D1 for quite some time, with very good success. How does Papa Cut compare to 3D1? Also, I have been using The Last Coat for the Si02 sealant. In your opinion, how does the Last Coat compare to Blue Collar 3? Always enjoy your excellent videos!
3D one may have more cut… but Papa finishes down better.
It’s all about how much pressure you put on the DA polisher and how fast you go. I will do the 2 pass method with pressure to cut and then do another pass with zero pressure and go a little faster to finish when using 3D One. I’ve also used The Last Coat 2 in the past and it performs well. I also use Ethos Resist Graphene spray with great success.
Great turnaround!
Question: a car was in the garage and l.e.d. light fixture shorted out and circuit board inside caught fire. Plastic melted, and plastic dripped onto roof. Put out fixture fire with extinguisher. How to remove melted plastic and fire extinguisher propellant safely? Thank you Brian!
Heat gun for the plastic....Citrol 266 for the rest of the mess. I would start there. I hope that didnt happen to you!
Can I used the b3 in direct sunlight? I'm mobile detailer
Absolutely
Oh yeah!😁👍🏻
@apexdetail85 I just order it.
Killer Kombo 👌🤓
Nice
What kind of paint was that? You know what car that door came off of?
Medium hardness. GM.
Hey Brian. Do you get a lot of customers that come in because of your TH-cam videos? Just curious.
Absolutely!😁👍🏻
i really dont understand what kind of clear you guys have over there. For me on german cars(most of what i do) the urofiber pad doesnt do much
We have mostly soft to medium hardness clear. Water based.
@@apexdetail85water based clear? Are you sure?
5:46 😂😂😂😂
First!!!!!!