This is great. I've always worked away from doors. Now I have no choice but to work my way towards one I've been wondering how to get the end piece in. Great tip, really well explained and demonstrated
Some LVP wont drop straight down on the butt joints.So if you can't tilt it, modifying the tongues is the only way as shown in the video. Sometimes, gorilla glue on the tongues is a good idea to reinforce the tongue and groove connection after you shave it down.
How is this supposed to work if you have a tongue/groove on the short AND long ends? I'm trying to fit the long tongue into the groove and then tilt down to the floor but the door jamb is in the way on the opposite side. I'd have to cut the board too slim to slide under the jamb if it's to clear it while fitting the board into the groove.
Good video, but confused. There's supposed to be a 1/4" gap around the ends of the flooring, yet the video shows the flooring flush up against the left wall. Also, the markings you made and the way you discussed where the cuts need to be for the door jambs so the transitions work, also seem to leave out the 1/4" gap, as they should not be pressed hard up against the transition strip. The video leaves some crucial parts out, such as showing how close the laminate is to the mounted transition track. Did you even use the metal track for the transition strip? Or did you just use construction adhesive?
Saved me the hassle of tearing down and reinstalling door jambs. Cheers!
Thanks for the support!!!
I can not thank you enough for guiding us on our final in reverse strip with door jams.that we found extremely challenging. Keep up the good work.
Wow! Your comment was positive, thank you!
This is great. I've always worked away from doors. Now I have no choice but to work my way towards one I've been wondering how to get the end piece in. Great tip, really well explained and demonstrated
Thanks for your encouragement and for supporting our channel!!!
Oh this really helped me out, removing a bit of the tongue is Exactly what I was missing
Thanks for your encouragement!!!
Thank you for the great tip ! I though I had to tear the door jams again
What a lifesaver! Too bad my flooring is not tapping in as easy as this though.
First time if seen your videos but I’ll be using this at the weekend as I’ve got 90sq/ft to lay in my new home lol
Thanks for supporting our channel!!!
Some LVP wont drop straight down on the butt joints.So if you can't tilt it, modifying the tongues is the only way as shown in the video. Sometimes, gorilla glue on the tongues is a good idea to reinforce the tongue and groove connection after you shave it down.
I agree,
Thanks for your support!
How is this supposed to work if you have a tongue/groove on the short AND long ends? I'm trying to fit the long tongue into the groove and then tilt down to the floor but the door jamb is in the way on the opposite side. I'd have to cut the board too slim to slide under the jamb if it's to clear it while fitting the board into the groove.
Good video, but confused. There's supposed to be a 1/4" gap around the ends of the flooring, yet the video shows the flooring flush up against the left wall. Also, the markings you made and the way you discussed where the cuts need to be for the door jambs so the transitions work, also seem to leave out the 1/4" gap, as they should not be pressed hard up against the transition strip. The video leaves some crucial parts out, such as showing how close the laminate is to the mounted transition track. Did you even use the metal track for the transition strip? Or did you just use construction adhesive?
Thanks for your support!
Maybe you should watch it again!
Great tip! 😉😉😉😉
Thanks Bro!
Thanks for supporting our channel!!
The transition you put under door frame, what tool you use to do the cut just like the reducer shape
Table saw!!!
Question, do you leave an expansion gap underneath the door jamb too? If so how.
Yes try and not make it super tight!
Thanks for your support!
You’re awesome
Takes one to know one!
Do you have to end for the transition under the door?
Yes it’s called an end cap
Did this flooring not have tongue and groove on the butt ends? The second piece you installed just dropped into place.
It is a drop system so yes it’s easier than having another lock on the ends.
Would youdo the same through a doorway with no door.
Probably easier with no door, but depends on the situation!
Nice
thanks for your support!
Finally
Thanks for your support! You’re the best!
WTF ARE U SAYING
I was saying thank you for supporting our channel!!!