I have found coupler trip pins to be an absolute menace to society. I started using pliers to bend mine up further. If you don't use the magnet uncouple thingy, cutting them off entirely might be a good idea. But thanks for posting this video!
Wow! The HO FRA are going to be busy! I'm trying to imagine how small the wheel gauges have to be to measure the flanges LOL! Next thing we know it, the HO NTSB will get involved and we'll see HO wheel truing shops and HO track gangs popping up all over the place!
So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
1:35 to 1:40 So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
i'd bet with that fan-powered meme unit, it's having trouble intaking the air it needs to push back since it's right up against the back of the teeny cab unit. It's able to push a bit at the start because it uses the still air all around it, but then after that has trouble sucking more in to blow back. Moving the fan farther back, on top or in front would do the trick, if any of these are even possible
Love it, that's what I miss about my set up, figure out why it crashes. at the moment no room so it all sits in box's love everything about it, it isn't easy, but some got to do it, thank you.
You'll have to scratchbuild one, just need an Athearn hustler chassis and the fan setup. Dedicated video on channel covers more details under the hood.
Does anyone remember the VHS tapes sort of like this with the music and the guy with the glasses waving at us from the caboose? Edit: It was called "I Love Toy Trains" and they're on TH-cam.
I'm pretty sure a lot of that was the result of failing to follow standards. Especially low coupler trip pins. It's simple get a kadee height gauge, and if the pin touches the base plate, bend them up slightly with pliers or cut off entirely. Then some is probably dirty wheel or track related as well.
as much of a mess it would be to clean up. i would like to fill empty hopper cars made of metal with small pebbles and stone but make a almost realistic engine that can in theory spray sand on inclines and allow it to move with a much heavier load. would also make derailments seem much cooler.
I wonder, Where are Alco FA/FB units? I watched a video about the Rapido Alco FA/FB-2 units, and the Canadian Pacific FA-1 with FB-2 looks pretty good.
Now I know why there are so many derailments on this layout… those are DCC engines you have running around. No wonder they don’t behave! XD 2:11 Also what is this hellish Amtrak abomination and why did you create it-
@Cyber_Horse_Studios87 Found the Amtrak piece at a show, it was too chaotic not to grab. There's a video of it solely running on channel as well. The layout would do the same, whether it was DC or DCC under the hood.
@@SCL3618 ah okay so you didn’t build it. Still the moment I saw it I was filled with a mix of horror and amazement. A rail zeppelin made out of an Amtrak. Also yeah that’s fair, I’ve just always found DCC to be a bit more of a chaotic system. XD
Them things are derailing more than NS💀
Old honse will always hold the record.
Lol😂
Agreed
Bros layout NS simulator now 💀💀💀💀
@@OfficialDenverRioGrandeWestern Enough club members run NS junk, was only a matter of time!
That car derailing at 0:08 while the rest reconnected after the turn was perfect timing.
Auto-shortening train.
1:38 Caught me off guard 😂
To quote I ❤️ Toy Trains…
“Oh no!”
The ore hopper bouncing down the hill was very enjoyable. Could watch that all day.
And no messy ore to clean up😆
The one where the 0 6 0 farted cracked me up
Yep, that one had me laugh out loud! It was very unexpected and funny as hell!
I have found coupler trip pins to be an absolute menace to society. I started using pliers to bend mine up further. If you don't use the magnet uncouple thingy, cutting them off entirely might be a good idea. But thanks for posting this video!
The reason why the uk's hook and loop model coupler system is peak to me
@@Mike-no6fvThe UK appreciates your appreciation.
1:48 😂 the model train layout is acting like pen central 2.0
Ouch! Right in the Bankruptcy!
Keep ‘em coming 3618!!!
Wow! The HO FRA are going to be busy! I'm trying to imagine how small the wheel gauges have to be to measure the flanges LOL! Next thing we know it, the HO NTSB will get involved and we'll see HO wheel truing shops and HO track gangs popping up all over the place!
Love that barrel roll from the Rio Grande hopper.
Yay! Part 19! 😊
WHAT IS THAT GOOFY AAH AMTRAK PROPELLER LOCOMOTIVE?!?!
Covered in a dedicated video on channel!
@@SCL3618eowowksw
The sound effects are simply.. muah 😚
That's why we keep them around!
The German tank engine farded 💀
2:01 "and y'all thought I made this stuff up!" LMAO
Even though the closest thing I have to a proper model train layout is TOMY Thomas toys on a grass map this is still relatable
1:37 spit my drank all over a few locos lmao 😂
1:38 *POOT*
Let it rip!
0:53 excavator: "I'm freeee!" then "Oh no, I'm going back!"
this is a early christmas gift (entertainment)
surprised that BC rail didn't cause any problems this time!
That consist behaves well, only issues with certain portions of this layout.
that makes sense.
Marklin: I don't feel so good
That's a Roco engine, but very similar to Marklin offerings.
So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
@@SCL3618how do you fix it
I absolutley lost it when the Marklin tank engine farted smoke at 1:36.
Definitely something to be said for the solid fake ore loads. I used to use the real style loads, but often spent a lot of time sweeping them up.
1:16 looks like Grandma needs a nap, she seems a tiny bit tired to run up grade
that BR 80 that Literally shat itself. 💀💀💀
So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
So marklin got sent to bigg city port for farting
1:35 to 1:40
So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
i'd bet with that fan-powered meme unit, it's having trouble intaking the air it needs to push back since it's right up against the back of the teeny cab unit. It's able to push a bit at the start because it uses the still air all around it, but then after that has trouble sucking more in to blow back. Moving the fan farther back, on top or in front would do the trick, if any of these are even possible
Imho i think a cowling would work better, given the shape of the blades. Seems to be pushing air more to the sides if anything
@@mezkhalin This too. 👆Brilliant idea, right here
I wish I had a layout like that! But I’m only a teenager! lol 😂
NS is that you....oh wait its CPKC lol 😅...awesome video dude😅
Nahh, Beaver can't beat the stupid horse on fireballs 😂 thanks for watching!
@@SCL3618 Lol your welcome dude
0:39 DECOUPLED!
So I'm not the only one what has trouble keeping his trains on the tracks!
Thank goodness that giant hand-shaped sky crane is there to clean things up!
That’s a fender bender!
Bro you need to upgrade those tracks and those trains that's why they're crashing all the time
Club happily accepts monetary donations to make that happen!
That diamond is the Diamond of Death there. I mean, a blind guy could see it needs work.
A great video
No elves or reindeer were harmed in the making of these derailments.
All we had to do was follow the damn train CJ
The layout can’t catch a break, can it.
3:29 that sounds like the same horn from the movie "American Graffitti" where thr main guy has to tie a poloce car to a light pole
Happy new year bro. Great model trains
Happy New Year! Thanks for watching.
Are these just doing that on purpose or is it still accidental? Lol
No fun in staging, these are all as it comes. Also why it takes so long between videos.
@@SCL3618 I am just so amazed that these things happen every single time.
Love it, that's what I miss about my set up, figure out why it crashes. at the moment no room so it all sits in box's love everything about it, it isn't easy, but some got to do it, thank you.
FINALLY A NEW INSTALLMENT INTO THE SERIES
Takes a while to put together! Had enough leftovers after last week to get it over the line.
@@SCL3618 well that's good that you had enough, I always get excited when one of these get pumped out!
1:10 I like classic train ❤
This looks like the real american trainlines, so realistic!
the NG one in the start was a stunt lol
Nope! Car picked the switch just before curve, engine stalled briefly and kicked it over once it jerked forward.
@@SCL3618 Oh wow
I love your video, and the sound affects !!
Thanks for watching!
2:25 *WERE CAN I GET ONE OF THESE*
You'll have to scratchbuild one, just need an Athearn hustler chassis and the fan setup. Dedicated video on channel covers more details under the hood.
It's the Joe Biden Express!!
Proof that model railroading is a dangerous sport!
Part 19 was already needed
1:37 This had me laughing so hard!
Looks like the Escanaba & Lake Superior here in Mich.
I just now noticed this video
1:58 what app is that?
Engine Driver- Android version of JMRI Withrottle.
Does anyone remember the VHS tapes sort of like this with the music and the guy with the glasses waving at us from the caboose?
Edit: It was called "I Love Toy Trains" and they're on TH-cam.
Oh, Wow😂 Inspired to share some of my own😅
That's how this whole thing got started!
#RunningTrainsBetterThanNS
Not hard to do at this point!
Do you just have bad luck on this layout🤣🤣🤣
That's been the deal since day 1!
That excavator has seen some scary s*it!!
Engineer Bob Sez " Always make sure that your Kadee glad hands are at proper height and all wheels are checked to be sure they are at proper width"
I had to send a crew to rerail the derailed locomotives and railcars
I hate to see the cars roll down the hill but it was a blast.
Rio hopper was a $4 show find, added the load myself. Not the worst car to take the tumble when I need to revamp the load anyways lol.
Can you do a video on just hon3
There's a video or 2 covering that layout on channel. Most recent was last run before teardown.
I'm pretty sure a lot of that was the result of failing to follow standards. Especially low coupler trip pins. It's simple get a kadee height gauge, and if the pin touches the base plate, bend them up slightly with pliers or cut off entirely. Then some is probably dirty wheel or track related as well.
Factory standard height cars with no sag fall victim to this joint as well. There's no rhyme or reason.
The little engine that couldn’t.
I think you need a train full of Swift trucks.👍😆
The amount of NS junk on this layout has side effects, Swift of RR's comes home to roost!
Trucks always cause trouble, sometimes it almost feels like it’s on purpose
Operations night at this club must be a hoot!!! I have to ask - who brings the beer????
All of this can be accomplished as-is sober. Albeit some drinks would make it more fun.
Oh the humanity!!!
Is that a club layout
Yep! Cab ride video in my Playlist will show it off more.
Bigger prop. The body is blocking all the air.
as much of a mess it would be to clean up. i would like to fill empty hopper cars made of metal with small pebbles and stone but make a almost realistic engine that can in theory spray sand on inclines and allow it to move with a much heavier load.
would also make derailments seem much cooler.
I wonder, Where are Alco FA/FB units? I watched a video about the Rapido Alco FA/FB-2 units, and the Canadian Pacific FA-1 with FB-2 looks pretty good.
Don't own any F A/B sets currently.
@@SCL3618, well, then let’s hope you do Some day.
You should have a vid of just derailments on the diamond
2:12 WHAT IS THAT I WANT IT
1:35 We have the appearance of markling
I need a version with Train Town effects and voice snipets....
*Detector Alarm* Defect Detected *Break*
Where is your club located?
NC, more in depth details are in the layout cab ride video.
Merry Christmas SCL3618
Merry Christmas!
@@SCL3618 and a Happy New Year
The fan on that amtrak streamliner isnt sucking in sufficient air, hence why it isn't working good
GOBBLESS BORTHER!
WE ROLLIN GOOD UNTIL THE CLIBBINS HIT HOSS!1! BARB WASN'T HAPPY.
No mass evacuations were caused in the making of this video.
1:10 I wonder if 346 was smelling Kenosha and that’s why it didn’t wanna run well
Now I know why there are so many derailments on this layout… those are DCC engines you have running around. No wonder they don’t behave! XD
2:11
Also what is this hellish Amtrak abomination and why did you create it-
@Cyber_Horse_Studios87 Found the Amtrak piece at a show, it was too chaotic not to grab. There's a video of it solely running on channel as well. The layout would do the same, whether it was DC or DCC under the hood.
@@SCL3618 ah okay so you didn’t build it. Still the moment I saw it I was filled with a mix of horror and amazement. A rail zeppelin made out of an Amtrak. Also yeah that’s fair, I’ve just always found DCC to be a bit more of a chaotic system. XD
I have fun when l watching this video
How come none of those coal cars spill there loads
I made the loads on top of foam blocks, all glued down instead of running live loads.
@@SCL3618 CHICKEN!!
@@markh.6687 If you want to come clean it up, be my guest!
i think the mow crew has been on strike
No; the settled the strike and came back to work seriously intoxilated...impixleated...I mean drunk!
Im always scared that derailments will short circuit my controller
Not very likely in HO. Most controllers have circuit breakers built in.
Phew ok@@SCL3618
Where is this building cause there is no way your basement is all trains
Club layout, details in the cab ride video.
I would like to see mo footage of your jw bowker
1:54 what (me near the train derailment be like)🤐
Pov NorthlansZ:
3:06 what is that.......?
Tomix ED79 pulling Kato JR Hokutosei consist.
@@SCL3618 Thanks 👍
Cool trains🚂🚃🚃🚃🚃🚃🚃🚃
01:36 BR 80: _Entschuldigung, ich musste Furzen!_
if u slowed down and check coupler height most of ur problems would be fixed
Running slow at this place gets you run over, mainline run = mainline speeds.
Metele a los vagones arroz para que pese
I've warned you before about hiring Homer Simpson for your safety inspector, so I have no sympathy for you! :P