I'm new to scooters and recently purchased a 2016 Taizhou 150cc. Turned out to be more work than was told. I'm having a hard time finding wiring diagram and plastics. Virberello, can you or anyone advise on the best place to get parts. My scooter looks identical to the one in this video.
Hello my friend check this shorturl.at/rTZ89 or shorturl.at/mnESV for parts for wire diagram check this shorturl.at/cuzP7 thank you for watching my video
i always keep replica keys on me so if this happens i use the spair...genius and cheap solution because imagine this happens late at night and your tools are in the...where you left youre key so i know most people keep a spare at home but somtimes home is 100 km away so just be a genius like me and btw make a copy for youre home and then you are double genius cause keys do get forgotten etc.
I had that very thing happen to me at the grocery store. I approached this problem a bit different. On my scooter there is one 10mm bolt at the hinge. Remove that hinge bolt, and you are able to lift the front of the seat enought to recover the key, and or, most anything else under the seat. One bolt, about 2 minutes, or less, and wala. I realize all scooters are not the same, but worked on mine. Regards
Unfortunately I'm not to familiar with that scooter but the first thing I will try to see looking under need your scooter I will check if you have a cable that you can pull or a level that you can push
I'm doing this project on my Kymco Grand Vista 250. I've taken the front cowling off to get at the back of the ignition switch where the cable comes out and goes back to the seat lock. Pulling on the cable didn't work nor did screwing the cable adjuster all the way in. I figure that leaves the cable broken as the problem. I've noticed from pictures that on the seat end of the cable is a little pressed on ball that attaches the cable to the seat lock. Maybe that pressed on ball came off or loose. It was hard enough getting the front cowling off and moving the radiator out of the way to see the ignition and cable. Now I've got to disassemble the whole rear end of the scooter. Gee, it's not like I had anything else to do on a bright, sunny day.
My scooter have just one key i buy a blank key on ebay and ask a shop to cut the key four me and the key open the seat and same key on the engnition the key i ask to cut is open the seat and not work on the engnition what you thing way is not working thank you
Hiya. This video made me panic but also to look up a manual for my scooter (Kymco Liberty) as mine was under the saddle. Theres a manual release lever in the front case. Great relief
Yep I know many ways I can open it in 30 seconds but I can not make a video about it or there is a possibly that I will help bad people to do bad things . Thank you for watching my video
I try to use the steering lock for my bike it’s locks but can’t take the key out but if I turn the bike I can take the key out but the steering lock don’t work then
t sounds like you're having a problem with the steering lock on your scooter. The issue you're facing could be related to the scooter's ignition switch or the steering lock mechanism. Here are some steps you can take to address this problem: Key Position: First, ensure that the scooter is in the "off" position before attempting to engage the steering lock. If the scooter is running or the key is in the "on" position, the steering lock may not engage. Wiggle the Handlebars: Before locking the steering, gently wiggle the handlebars from side to side while turning the key to the "lock" position. Sometimes, the steering lock may not engage if the handlebars are not perfectly centered. Lubrication: The steering lock mechanism may be sticking due to dirt, rust, or lack of lubrication. You can try applying a suitable lubricant, such as a graphite-based lock lubricant, into the keyhole and the lock mechanism. Work the key in and out to distribute the lubricant and free up any obstructions. Inspect the Lock Mechanism: Check for any visible obstructions or damage to the steering lock mechanism. Make sure there's nothing blocking its proper operation. If you find any debris or damage, carefully clean or repair the mechanism as needed. Turn the Scooter Off: If you can only remove the key when the scooter is turned, it might be a safety feature designed to prevent the steering lock from engaging while the scooter is running. Make sure you turn off the scooter before attempting to engage the steering lock. If you've tried these steps and the problem persists, it might be a more complex issue that requires professional inspection and repair. In that case, consider reaching out to a local scooter mechanic or dealership for further assistance. They can diagnose and resolve the issue to ensure that your steering lock works as it should.
Maybe drill a hole in the mechanism and put a wire through it and hide it. If it happens again, find that wire and pull it. Just a thought if you don't have a second key.
Hello my friend there is an easy way if the key are inside the bucket under the seat on a gy6 scooter if you have a small hand there is a little door right above your carburetor try to open that
my scoot came with two key's the first broke off in the ignitiion... not the end of the world... still can start it up lol.... but then i lost the second... so i couldnt open the seat compartment to fill it with gas.... so upon watching your video, i decided to give it a try opening it.. i ended up just breaking the metal cable of the end of the key lock and now i just pull that to open it lol... thank you. this is the second video of yours i have used for scooter help... the other one being the air filter install video..... my scooter a taotao quantum 150 did not agree with any of the filters i bought and even bought that nibbi pipe and boot for it.. still no luck.
Hello It's essential to prioritize safety when attempting to open the seat while the scooter is running. Doing so may cause accidents or damage to the scooter or the person that work on it . Check the Owner's Manual: Before attempting anything, consult your scooter's owner's manual. This document will contain specific instructions for your particular scooter model. Locate the Seat Release Mechanism: Most scooters have a seat release mechanism that is usually located near the rear of the scooter, often beneath the seat or along the sides. This mechanism may be a lever, latch, or button. Ensure Safety: Ensure that you are in a safe and stable location, preferably with the scooter on a flat and level surface. Make sure you are not in traffic or a hazardous situation. Apply the Brake: For safety, make sure the scooter is stationary, and apply the brake. Some scooters may have a safety feature that prevents the seat from opening if the brake is not engaged. Engage the Clutch (if applicable): If your scooter has a manual clutch, you may need to engage it. Again, this is a safety feature to prevent the scooter from moving when you open the seat. Use the Seat Release Mechanism: Depending on your scooter's design, use the seat release mechanism. It may involve lifting a latch, pushing a button, or turning a key. Follow the instructions provided in your owner's manual. Lift the Seat: After releasing the mechanism, gently lift the seat. It should open smoothly. Be cautious and keep your fingers and clothing clear of any moving parts or hot surfaces.
Dude, I almost had to do this to my brand new scooter because I couldn't figure out how to open it from the start. Thank goodness for these videos. I found the one that showed me how to use the key. The manual was under the seat.
I got a PGO, don't know the model as I got it for free from my stepdad who was cleaning out his garage at his work and didn't use it and it had stood there for 5-6 years unused since he last used it. Used a weed removal tool that kind of looks like a flatheaded screwdriver with a small V shape in the middle and just managed to reach all the way to the locking mechanism from under the scooter by following the cable from the lock to it using a flashlight. A bit of fumbling and a clicking sound and the saddle was open so one dont necessary need to remove all stuff though I was lucky to have the weed tool as no screwdriver like tool had a loong enough handle except this one which had a handle a long as my forearm and then a little. So not an easy place to reach unless one has a thin long tool to poke around with. I have to give credit to this and multiple other videos thou as you guys gave me a good idea to what look for when I was fumbling around under the scooter so thx for a good video. :D
It sounds like you had quite the adventure getting that PGO scooter's saddle open! Using a weed removal tool as a makeshift long-reach tool to access the locking mechanism is pretty creative. It's great that you were able to find a solution without having to remove a lot of parts. Your experience shows that with some improvisation and a bit of guidance from helpful videos, it's possible to tackle these kinds of challenges. Thanks for sharing your story, and I'm glad the videos gave you a good idea of what to look for. Keep up the good work!
@@VirberelloScooterTips Part of the problem why I had to go this route is that the back screen on this scooter has 2 screws on the outside facing back...and another 2 underneath facing forward that it looked like I had to remove the interal saddle compartment to reach or something. Because of that despite trying, I could not remove the back portions to reach in from there. The only other video with a identical model I found, that youtuber had instead drilled out his lock to get it opened and switched out gas, ignition and saddle lock afterward. I was lucky in that I did not have to go to that extent thou. Again cheers and thx.
Hello jkhxcjk44 do not be under the influence when you watching my videos my friend you may be not focus on what you are doing and scooter can blow up again again be very careful . Very proud of your work Bro thank you for watching my video , be safe and put the right protection gears when doing scooter mechanic work
@@VirberelloScooterTips Yea, it was very easy on my scooter, but could you do or do you have a video on how to fix the seat button? If you can, I found the cable but I have not ideal how to tighten it up.
Awesome video. Can you make a video for dismounting all the scooters plastics? everything from from to rear. For this specific scooter model. Hope you can make it. Thanks so much and keep up with the good content.
Just bought a Benelli Andretti X50 in need of some love with a dead battery. Well electric latch and battery located under seat???? Who designed this part of the scooter??? Can't wait to get into it and make it run again. Sadly this is the biggest hurdle I see so far, opening the seat!
Just add This is a good informative video. But to add some further information do this this use a a fishing line tracer wire onto the latch, it's easily hidden. Then you can open the seat anytime you accidentally leave your keys inside or for any other reason you need to open the seat without having a key. There are videos on TH-cam to show you how one of the best is to look at Larry's video on mancave mayhem. This hack from Larry is very easy and only takes minutes to do so you will never have to worry about this problem happening
My 2017 Tao Tao Thunder doesn't have that square piece too remove. Nor do I have those type tail lights. What do I do..?? 🤔🤔🤔🤔🤔 Plus, It's a Whole Lot easier To Get a 2nd key. lol I Have 4 sets. To make sure that never happens. But, Great Video for those to cheap to buy extra keys. 😋😋😊😊
@@VirberelloScooterTips Your Welcome. 👍 And Thank You for making these video's. 👍👍 I've watched 4 so far. I just watched the Valve Adjustment Video. Great Stuff.. Now I Know how to do that. I already know how to do most things. But anything I don't know. I see u have a video to show me how to do it. You show very detailed video's. I Really like all I've watched so far. I really do appreciate you making these videos to help people like me who's new to owning a scooter how to fix and maintain them. 👍👍👍 Ty. I just bought a High Performance Carberator. But my Gas line into the Carb is different than my old one. I'm not sure what to do.? I'm going to watch Your carberator video and see if that can help me. If not I'll have to call the place where I bought it. Everything matches perfect. Except where the gas line goes in. There's a screw where my gas line should go on. I can unscrew it. But I can't get my old port that the gas line goes on out.. Next to the gas line in. There's a 2nd unused port in. But I don't know if I can put the gas line on that.? I know it's hard to understand without a Picture. But I'm going to try that and see if it works.? I have a Question. My scooter has 800 miles on it. Should I have to adjust my valves already..?? My scooter won't stay running until it warms up. I changed the Auto choke. No difference. Now I'm trying a new Carb. Could it be my valve adjustment..?? Thank You. And Thanx for the Great Videos. 👍👍👍👍
Hello Matowix if you lock the key inside on all the gy6 there is a little door on the lower part of the under seat bucket above the carburetor that could be a easier way to get your key back if you have a small hand Thank you for watching my video
Happened to me recently while at a hardware store. From the key side or left side I reached up through the side panel and found the bottom of the screw that holds down the small rectangular plastic that you normally unscrew to adjust your idle from under your seat. Twisted that screw up until my hand broke through the rectangular hole and finally pulled the keys out from the bottom. I had no tools on hand.
!!!FANTASTIC!!! It it possible for you to do a video on replacing the key ignition switch and the truck key assembly? I recently bought a scooter with clean and clear title but the owner lost the keys and was using a flat screwdriver to start the scooter and to get into the truck.
I have the same problem. Except I don't have a key. Now I know how to open the seat. Thanks
Hello White lighting thank you for watching my videos
I'm new to scooters and recently purchased a 2016 Taizhou 150cc. Turned out to be more work than was told. I'm having a hard time finding wiring diagram and plastics. Virberello, can you or anyone advise on the best place to get parts. My scooter looks identical to the one in this video.
Hello my friend check this shorturl.at/rTZ89 or shorturl.at/mnESV for parts for wire diagram check this shorturl.at/cuzP7 thank you for watching my video
@@VirberelloScooterTips Thank you SOOO much my friend. You are the man!!!
i always keep replica keys on me so if this happens i use the spair...genius and cheap solution because imagine this happens late at night and your tools are in the...where you left youre key so i know most people keep a spare at home but somtimes home is 100 km away so just be a genius like me and btw make a copy for youre home and then you are double genius cause keys do get forgotten etc.
Great Idea Roy for a replica key and thank you for watching my video
Thanks for this! I just bought a used scooter yesterday and already accidentally dropped the keys as I was closing the seat...and it only has one key!
Hello Rick thank you for watching my video
I had that very thing happen to me at the grocery store. I approached this problem a bit different. On my scooter there is one 10mm bolt at the hinge. Remove that hinge bolt, and you are able to lift the front of the seat enought to recover the key, and or, most anything else under the seat.
One bolt, about 2 minutes, or less, and wala. I realize all scooters are not the same, but worked on mine.
Regards
Hello Riley thank you for sharing your experience with us and thank you for watching my video
omG, I think I would pop open with a hatchet and just pay and replace the seat. This is ridiculous if the only real way to do it.
Do you think I will tell you the easy and fast way so everyone can take a scooter in 5 second Think Macfly
I have a 2013 honda pcx150 with the key locked in the seat. Is the process the same?
Hello my friend more or less is the same but look under the scooter if you see the cable that open the back lock and try to pull it gently
Amazing but what kind of trick do you have to open the Kymco Exciting 400 VS 2023 seat, when the battery is dead or outside the scooter???
Unfortunately I'm not to familiar with that scooter but the first thing I will try to see looking under need your scooter I will check if you have a cable that you can pull or a level that you can push
I'm doing this project on my Kymco Grand Vista 250. I've taken the front cowling off to get at the back of the ignition switch where the cable comes out and goes back to the seat lock. Pulling on the cable didn't work nor did screwing the cable adjuster all the way in. I figure that leaves the cable broken as the problem. I've noticed from pictures that on the seat end of the cable is a little pressed on ball that attaches the cable to the seat lock. Maybe that pressed on ball came off or loose. It was hard enough getting the front cowling off and moving the radiator out of the way to see the ignition and cable. Now I've got to disassemble the whole rear end of the scooter. Gee, it's not like I had anything else to do on a bright, sunny day.
My scooter have just one key i buy a blank key on ebay and ask a shop to cut the key four me and the key open the seat and same key on the engnition the key i ask to cut is open the seat and not work on the engnition what you thing way is not working thank you
Hello Abel the best thing to do is to show the two key to a professional locksmith I think the new key is slightly thinner
Some bikes have a cable which is connected to the latch and all you have to do is to just pull on that cable and it’s open
Hello my friend great idea and thank you for watching my video
Hiya. This video made me panic but also to look up a manual for my scooter (Kymco Liberty) as mine was under the saddle. Theres a manual release lever in the front case. Great relief
I did it without removing anything or damaging anything in 5 minutes or less
Yep I know many ways I can open it in 30 seconds but I can not make a video about it or there is a possibly that I will help bad people to do bad things . Thank you for watching my video
Did not work for me. Just lifted seas a little used metal hanger to fish key out took like 3 min
Great idea and thank you for watching my video
I try to use the steering lock for my bike it’s locks but can’t take the key out but if I turn the bike I can take the key out but the steering lock don’t work then
t sounds like you're having a problem with the steering lock on your scooter. The issue you're facing could be related to the scooter's ignition switch or the steering lock mechanism. Here are some steps you can take to address this problem:
Key Position: First, ensure that the scooter is in the "off" position before attempting to engage the steering lock. If the scooter is running or the key is in the "on" position, the steering lock may not engage.
Wiggle the Handlebars: Before locking the steering, gently wiggle the handlebars from side to side while turning the key to the "lock" position. Sometimes, the steering lock may not engage if the handlebars are not perfectly centered.
Lubrication: The steering lock mechanism may be sticking due to dirt, rust, or lack of lubrication. You can try applying a suitable lubricant, such as a graphite-based lock lubricant, into the keyhole and the lock mechanism. Work the key in and out to distribute the lubricant and free up any obstructions.
Inspect the Lock Mechanism: Check for any visible obstructions or damage to the steering lock mechanism. Make sure there's nothing blocking its proper operation. If you find any debris or damage, carefully clean or repair the mechanism as needed.
Turn the Scooter Off: If you can only remove the key when the scooter is turned, it might be a safety feature designed to prevent the steering lock from engaging while the scooter is running. Make sure you turn off the scooter before attempting to engage the steering lock.
If you've tried these steps and the problem persists, it might be a more complex issue that requires professional inspection and repair. In that case, consider reaching out to a local scooter mechanic or dealership for further assistance. They can diagnose and resolve the issue to ensure that your steering lock works as it should.
@@VirberelloScooterTips thx
Maybe drill a hole in the mechanism and put a wire through it and hide it. If it happens again, find that wire and pull it. Just a thought if you don't have a second key.
Hello my friend I was thinking about to do that . Great idea !!! Thank you for watching my video
My friend varun forgot his key inside
Hello my friend there is an easy way if the key are inside the bucket under the seat on a gy6 scooter if you have a small hand there is a little door right above your carburetor try to open that
I think it is quite easier to pick the lock ...
Hello fu1r4 I never try that way but anything is possible . Thank you for watching my video
How to pick a lock video plz
My scooter key is functioning at all. I dont have access to the key cutter. Can you help me how to bypass the ignition key.
From Poland ❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤ Thank You ❤
You're welcome 😊
my scoot came with two key's the first broke off in the ignitiion... not the end of the world... still can start it up lol.... but then i lost the second... so i couldnt open the seat compartment to fill it with gas.... so upon watching your video, i decided to give it a try opening it.. i ended up just breaking the metal cable of the end of the key lock and now i just pull that to open it lol... thank you. this is the second video of yours i have used for scooter help... the other one being the air filter install video..... my scooter a taotao quantum 150 did not agree with any of the filters i bought and even bought that nibbi pipe and boot for it.. still no luck.
Hello Justin B thank you for watching my video
helped me a lot! Thank you so much. I was almost stranded in the middle of nowhere.
You are very welcome and thank you for watching my video
Does it work for peogeot vivacity
Hello I'm not sure research on line to see because I'm not to familiar with peogeot
how open scooter Seat after when scooter power on (without power off scooter)
Hello It's essential to prioritize safety when attempting to open the seat while the scooter is running. Doing so may cause accidents or damage to the scooter or the person that work on it . Check the Owner's Manual: Before attempting anything, consult your scooter's owner's manual. This document will contain specific instructions for your particular scooter model.
Locate the Seat Release Mechanism: Most scooters have a seat release mechanism that is usually located near the rear of the scooter, often beneath the seat or along the sides. This mechanism may be a lever, latch, or button.
Ensure Safety: Ensure that you are in a safe and stable location, preferably with the scooter on a flat and level surface. Make sure you are not in traffic or a hazardous situation.
Apply the Brake: For safety, make sure the scooter is stationary, and apply the brake. Some scooters may have a safety feature that prevents the seat from opening if the brake is not engaged.
Engage the Clutch (if applicable): If your scooter has a manual clutch, you may need to engage it. Again, this is a safety feature to prevent the scooter from moving when you open the seat.
Use the Seat Release Mechanism: Depending on your scooter's design, use the seat release mechanism. It may involve lifting a latch, pushing a button, or turning a key. Follow the instructions provided in your owner's manual.
Lift the Seat: After releasing the mechanism, gently lift the seat. It should open smoothly. Be cautious and keep your fingers and clothing clear of any moving parts or hot surfaces.
No key, still a problem tho
.
Dude, I almost had to do this to my brand new scooter because I couldn't figure out how to open it from the start. Thank goodness for these videos. I found the one that showed me how to use the key. The manual was under the seat.
Hello John thank you for watching my video
Great video Thank you for sharing your knowledge and the trick
thank you for watching my video
Make video with change ignition lock, many people lost keys and need do it.
Hello Brancaalice great idea thank you
You make a real good motorcycle mechanic you're very good teacher keep up the good work thank you for helping me out Steve from Annapolis
Hello Steve thank you for watching my video
I got a PGO, don't know the model as I got it for free from my stepdad who was cleaning out his garage at his work and didn't use it and it had stood there for 5-6 years unused since he last used it. Used a weed removal tool that kind of looks like a flatheaded screwdriver with a small V shape in the middle and just managed to reach all the way to the locking mechanism from under the scooter by following the cable from the lock to it using a flashlight. A bit of fumbling and a clicking sound and the saddle was open so one dont necessary need to remove all stuff though I was lucky to have the weed tool as no screwdriver like tool had a loong enough handle except this one which had a handle a long as my forearm and then a little.
So not an easy place to reach unless one has a thin long tool to poke around with. I have to give credit to this and multiple other videos thou as you guys gave me a good idea to what look for when I was fumbling around under the scooter so thx for a good video. :D
It sounds like you had quite the adventure getting that PGO scooter's saddle open! Using a weed removal tool as a makeshift long-reach tool to access the locking mechanism is pretty creative. It's great that you were able to find a solution without having to remove a lot of parts.
Your experience shows that with some improvisation and a bit of guidance from helpful videos, it's possible to tackle these kinds of challenges. Thanks for sharing your story, and I'm glad the videos gave you a good idea of what to look for. Keep up the good work!
@@VirberelloScooterTips Part of the problem why I had to go this route is that the back screen on this scooter has 2 screws on the outside facing back...and another 2 underneath facing forward that it looked like I had to remove the interal saddle compartment to reach or something. Because of that despite trying, I could not remove the back portions to reach in from there. The only other video with a identical model I found, that youtuber had instead drilled out his lock to get it opened and switched out gas, ignition and saddle lock afterward. I was lucky in that I did not have to go to that extent thou. Again cheers and thx.
Exactly why I have 2 keys.... Good trick if needed....
Hello Stephen thank you for watching my video
Instructions unclear
Scooter blew up, house caught fire, and now I'm suffering 3rd degree burns
Hello jkhxcjk44 do not be under the influence when you watching my videos my friend you may be not focus on what you are doing and scooter can blow up again again be very careful . Very proud of your work Bro thank you for watching my video , be safe and put the right protection gears when doing scooter mechanic work
You’re a life saver! I didn’t lock my keys in but my seat button just decided to stop working. Thankssss so much!
Glad I could help!
@@VirberelloScooterTips Yea, it was very easy on my scooter, but could you do or do you have a video on how to fix the seat button? If you can, I found the cable but I have not ideal how to tighten it up.
Awesome video. Can you make a video for dismounting all the scooters plastics? everything from from to rear. For this specific scooter model. Hope you can make it. Thanks so much and keep up with the good content.
Hello Diego thank you for watching my video
Just bought a Benelli Andretti X50 in need of some love with a dead battery. Well electric latch and battery located under seat???? Who designed this part of the scooter??? Can't wait to get into it and make it run again. Sadly this is the biggest hurdle I see so far, opening the seat!
That was a 14 minutes waste of time, he never opend………just pretend to open out of camera
Thank you for watching and wasting 14 minutes of your time but honestly I can not tell you how to open your scooter in 6 second and believe me I know
Just add
This is a good informative video. But to add some further information do this this use a a fishing line tracer wire onto the latch, it's easily hidden. Then you can open the seat anytime you accidentally leave your keys inside or for any other reason you need to open the seat without having a key. There are videos on TH-cam to show you how one of the best is to look at Larry's video on mancave mayhem. This hack from Larry is very easy and only takes minutes to do so you will never have to worry about this problem happening
Hello thank you for watching my video and thank you for sharing your idea
My 2017 Tao Tao Thunder doesn't have that square piece too remove. Nor do I have those type tail lights. What do I do..?? 🤔🤔🤔🤔🤔 Plus, It's a Whole Lot easier To Get a 2nd key. lol I Have 4 sets. To make sure that never happens. But, Great Video for those to cheap to buy extra keys. 😋😋😊😊
Hello Frank Thank you for watching my video
@@VirberelloScooterTips Your Welcome. 👍 And Thank You for making these video's. 👍👍 I've watched 4 so far. I just watched the Valve Adjustment Video. Great Stuff.. Now I Know how to do that. I already know how to do most things. But anything I don't know. I see u have a video to show me how to do it. You show very detailed video's. I Really like all I've watched so far. I really do appreciate you making these videos to help people like me who's new to owning a scooter how to fix and maintain them. 👍👍👍 Ty. I just bought a High Performance Carberator. But my Gas line into the Carb is different than my old one. I'm not sure what to do.? I'm going to watch Your carberator video and see if that can help me. If not I'll have to call the place where I bought it. Everything matches perfect. Except where the gas line goes in. There's a screw where my gas line should go on. I can unscrew it. But I can't get my old port that the gas line goes on out.. Next to the gas line in. There's a 2nd unused port in. But I don't know if I can put the gas line on that.? I know it's hard to understand without a Picture. But I'm going to try that and see if it works.? I have a Question. My scooter has 800 miles on it. Should I have to adjust my valves already..?? My scooter won't stay running until it warms up. I changed the Auto choke. No difference. Now I'm trying a new Carb. Could it be my valve adjustment..?? Thank You. And Thanx for the Great Videos. 👍👍👍👍
I love watching your videos. I always learn something new.
Hello Garcia thank you for watching my videos
It would be nice if you would type in your scooter model in the description or title.
Hello Katie great idea anyway my scooter is a MC 04 150k Chinese scooter with a gy6 150cc motor . Thank you for watching my video
My alarm doesn’t let me start my bike push start it works take out the alarm and it starts
Should I get a new alarm
If you like you can place a new alarm but they do not last long time for me they are just a waste of money
Great video dude, you saved ppls asses.
Thank you for watching my video
Love this video thank you my Italian friend
Thank you for watching my video
Nice video
Thank you for watching my video
I always worry about locking my keys under the seat. It's nearly happened a few times
Hello Matowix if you lock the key inside on all the gy6 there is a little door on the lower part of the under seat bucket above the carburetor that could be a easier way to get your key back if you have a small hand
Thank you for watching my video
@@VirberelloScooterTips I have a Hyosung scooter. Maybe it's the same.
I just did it dude I’m screwed
Tacks man!
Thank you for watching my video
THANK YOU
Thank you for watching my video
OK
Hello my friend thank you for watching my video
👌
Thank you for watching my video
meri Scooty activa ka lock ander ki side chala gya hai, ye kaise hua? kya karna chahiye ?
Brilliant
Thank you for watching my video
Happened to me recently while at a hardware store. From the key side or left side I reached up through the side panel and found the bottom of the screw that holds down the small rectangular plastic that you normally unscrew to adjust your idle from under your seat. Twisted that screw up until my hand broke through the rectangular hole and finally pulled the keys out from the bottom. I had no tools on hand.
Hello Roland I didn't think about that is a good idea . Thank you for watching my video
!!!FANTASTIC!!!
It it possible for you to do a video on replacing the key ignition switch and the truck key assembly?
I recently bought a scooter with clean and clear title but the owner lost the keys and was using a flat screwdriver to start the scooter and to get into the truck.
Hello my friend Thank you for watching my video
I am doing this project today. It's not that difficult. Feel free to ask me
Good stuff........
Do you guys like showing people how to steal your stuff
Ah ah ah ah this way that I show will take them long time and a lot of work ah ah ah there is easier ways but can not show that in video