You, sir, are an artist. And I do hope very much that Huben is paying attention, because if they're smart, this modification of yours is pure gold. I would buy one in a heartbeat.
You have done something outstanding! I hope you get the recognition that you deserve for such an accomplishment. I also hope these go into full production, there is a huge demand for a pistol like this.
Nisam ljubitelj PCP pištolja. Smatram da ne opravdavaju cijenu. No obožavam pogledati svaki tvoj video na temu pcp- a čak i kad je o pištoljima riječ. Impresivan posao i snaga. Svaka čast.
Great job! But Most airgun manufactures seem to ignore demand and go right back to producing some tired same old long deer rifle looking airgun. If Huben doesn't get it, present your talent to their competitors. : )
Dear Huben :-), you could sell thousands of these, please produce them. Ps , you ought to call them , THE K1amensek, and pass on a commission to Gregor. Please Gregor I can not wait, Do the APC shoot well in the Rifle?.
Yes, The ACP will shoot well in the rifle but the size of the mold has to be bigger. I am working with MP molds to have them available and I will have a video when they are ready...
We need this in a 308 with a little bit longer barrel, and 2x as much air. Also a larger plenum ect to tune the power. As long as you don’t increase the barrel length very much like 30% and maybe move the whole action back a little farther so you can increase the barrel length without effecting the total length of the gun. Moving the action back might be a little difficult though I think it will be worth it. .308 or .357 with a 24mm barrel would be a beast of a gun
@@gregorkamensek3923 would you be willing to convert one for me? I’d pay of course. Or could you sell the plastic parts I couldn’t make, and sell me those plus instructions to convert a huben k1 myself?
Gregor, could not let commending on each episode! Have seen all three episodes today, and I am so stoked!! this is such a great piece of engineering! Kudos and I am saluting you for creating this! I hope that Huben will get in touch with you and make this happen!!! Sooner rather than later! So Huben, if you make this, you can have my money to share with Gregor! PS! make it so you can fit a moderator/suppressor. I am sure that DonnyFL would help you out with it. Edited: Just saw you have another vid out with a moderator installed!! Brilliant!!!
We need this in .30 - .45cal With a power tune, also placement of the mag should be farther back so you can get a longer barrel without increasing the actual length of the gun. And the air capacity could be about 2x what is there. Even with 2x the air and in .3 this would be a magical system They are really on to something here with this gun!
30 at max that magazine can’t got any further back you’d have to mess with the internals I’d say put the magazine and air in the grip but this is a modified huben k1 not from the ground up
@@r3tr0ztail64 yeah that’s exactly what I’m saying I’m saying redesign the whole thing from the start! Using totally customized parts instead of starting from a huban
Hi Gregor. I’ve been shooting with my K1 2020 .25 with Nielson 33.5 grain slugs and it groups sub 2 moa in 75 yards. Reg. 130 & 42 clicks power wheel to the left. 900-910 FPS.
Pink house......I doubt anyone is going question your manhood bro. You just built the best PCP pistol ever.....by far. These companies have whole teams that cant figure out how to get 30fpe pistol.
Did You made tests: maximum effective turn energy knob (at fixed 170bars reg.) vs pellet weight? I think in higher weight, energy knob (power wheel) could be turn out some more :) regards
Question for the pro. I have a 25 V3. Ive seen shot strings with a 25 grain pellet set to around 30 FP shoot a pretty consistent string. First shot around 750, dips to about 725 and then back up to 750 again before tapering down. Average 25 fps spread through 2 mags which is fantastic. Closest i got was 35 fps but only once. Mine will start at 750, dip to 725 and then back up to 750 .. good so far. But then when the needle shows around 150 bar, instead of tapering down it will spike to 780-790 by shot 34 before tapering down. Spread goes from 30 to 60 in the last 6-7 shots (2nd mag) Ive tried various adjustments 30 ft lbs, 35 ft lbs, even lower 20 ft lbs. all does the same. Spikes beyond original (first shot FPS) Messing around, ive adjusted thw power screw 1/8 in at around shot 25. FPS is on the upswing by that point but hasn’t spiked yet. The adjustment lowers a 20 or so FPS but keeps it from spiking beyond 750 fps maintaining that 25-30 ES.
That sound about right. I think all pistols behave like this. The power/velocity curve is the same as if you would set any old unregulated rifle to lower power than it is capable off. The power spike at low pressure is only present with these lower power settings. You have 2 choices here (if your ultimate goal is consistency): keep the power setting and shoot down to only 150 bars (personally I don't recommend going to low with pressure anyway - you can see why in my "safety" video). Or you can increase the power to the power you get in the spike (of course, you will get less shots). In this case, the power will taper off, but I should also mention that taper off will appear at about 150 bars again, so you should still stop shooting at this pressure.
That's awesome that you were able to build your own pistol k1 style!!!!! Can you add a better air cylinder to achieve more shots than the 6 usable ones? Possibly a tank SMALL but more psi into it ??????
Here I have shown exactly what you asked in the comment form K1 :) Extreme power but not many shots. But I can select if I want more shots, I just turn the power down and vice versa. The very point of this pistol for me is that it is actual pistol and that it is not huge. But of course everyone has its own preference. My favorite setting is to shoot 10 shots per fill at 50 joule. That gives it some recoil (more than shooting with .22 LR pistol despite lower energy). It is also very accurate in this setting with .25 ACP slugs (45 grain hollow point). I also like that the magazine is not full, this contributes to safety, I don't want the pistol to have the slug in front of the valve until I ma ready to shoot...
This is a prototype from which HUBEN GK1was born. At the time, I did not know what is the max working pressure of the action as the rifle from which the action was taken had a regulator with max 220 bar pressure. You can check GK1 and its capability where the max working pressure is actually 350 bars...
Hi. Do I have to empty the regulator air to zero and put the gun aside after each use to keep the huben safe? I have a 2020 version of 6.35 caliber that has 2 manometers. Thank you for the answer
I usually shoot at about 48 j (35 fpe), that gives me 10 shots form about 260 bar fill. I can go lower on the power and get more of course but this is my typical setting.
Goddamnit Gregor. You've made our dream weapon....and we've gotta sit here loving it with zero recourse to purchase. Cold Blooded, hahahaha. Take this like and this subscribe...but I wish you'd take this Money
Hello from Chile. It happens that I bought pressure gauges to measure the capacity of the tank, but I can't make a mark of what it really has since the needle is not at zero even though it is not installed in the rifle. What can be ? I have several huben and all the gauges that I buy are the same. I hope someone can help me . regards Francisco
This does not necessarily mean that the gauge is faulty. You should install it and see if the values are correct for the working pressures; for example, it should accurate between 150 and 300 bars with some tolerances. Tolerances of these kind of gauges can be quite big, they are typically in a range of less than 10%... If the gauge is way off in the working pressure area, then you have a faulty gauge.
@@gregorkamensek3923 do you know what sort of barrels are necessary for firing copper plated slugs. Would a aea challenger work with .357 copper slugs? Or would I want to get a new barrel? Also I wish huban would start selling this pistol in .357 or 303 with a 22mm barrel (maybe even a little bigger idk) as well as a equivalently long air tank
@@gregmcb5305 Generally, every barrel should be capable to be used with copper plated slugs. Barrels are made out of steel and although the type of steel may vary, they are all much harder than copper (FX barrels may be an exception here, although I am pretty sure they are still much harder than copper). The question is why you would want to use copper plated slugs in an airgun? The reason why copper plated are used for firearms is mainly because of high velocity and problem with lead being too soft. For airgun velocities, lead is perfectly good enough actually even better; for accuracy you need certain tightness between the barrel and the slug and with copper, that would cause significant more friction and with airguns, we have no energy to waste on this... Also, the velocities will not be high enough for the lead to cause problems. So the barrels are not the reason why we do not shoot copper plated slug but rather other reasons... I would not suggest you to use copper plated slugs in the AEA guns. Because of higher friction, it might get stuck in the barrel...
@@gregorkamensek3923 The main reason I want to use copper plated rounds is so I can go hunting and not really have to worry about getting any lead in my meat. Also allot of Ranges and hunting areas don’t allow you to use lead anymore. And plus I already have health problems without lead in the mix haha I can also get 9mm copper plated slugs for 10c each which is a great deal compared to allot of air-rifle slugs out there haha. Thanks so much bro you have helped me out so much!
The model coming out the gk1 better have the ability to get 60fpe like this gun even if you'll only get 10-15 rounds a fill. For the price being charged I better be able to get more than the 33fpe the .25 is told to be capable of. That's wimpy. Maybe a magazine of slugs with 50fpe is somewhat acceptable but when a $350 pistol that's only 9in long Nd only uses air cartediges not on board air tanks and it's getting 70-75fpe with a 180grain .457 slug. If I'ma pay the price they're charging for the huben pistol it should either come with a barrel thatz 3-4in longer and be adjustable foe more power to get the 50+fpe range with 10-17shors a fill
Well, we will see. There are no data on the .25 out yet, but I am fairly confident that Huben will be modest in the specs, they typically give slightly lower figures. I think that the gun will be speced to about 45 fpe with some standard pellet, but will give out more with heavier low friction slugs. Remember that I was just barely able to get 60 fpe with my slugs V2 for K1. This number is about as close you can get in theory with such short barrel if you want more than one shot, I really does not matter how you feel about it, you cannot win an argument with physics (I mean no offence to you) :). When you have a certain limited pressure, it can only create a certain force based on the surface area (caliber) and this force will cause a limited acceleration in limited length of the barrel. We are using about 200 bars, even a round like .25ACP has more than a thousand bars (from WIKI, .25ACP creates 1700 bars). Bigger caliber will always create bigger energies because same pressure creates bigger force (the potential power is increased with caliber squared since it depends on the surface area). There are other limited factors like sonic speed of the air exc... but I am getting was too deep :)
I have a k1 I am having converted now I haven't heard back from the fellow but if you're interested I will ship it to you if I can't get it done here how can I make contact with you
@@gregorkamensek3923 if you can make one for me i pay you very well. I am a huge fan of huben k1 .22. I own one with a mold from mpmolds aswell. It sure is a unique experience that you are the only one. But coming back on making one. I am willing to pay very good. Tell me if you like it
@@gregorkamensek3923 y not I'll send u my huben k1 2018 .2499 and I'll pay for any parts up front as well as shipping and once you have completed it you can charge me the labor and send it back no over head I need this it will change things for everyone no one can be denied self preservation I would even be down to fund a .30 huben build big bore hammerless semi auto pcp pistol come on we need this available to buy how can we help you make it happen can u send me a parts list so I can try to put one together
@@omarzolo6689 This is the mold: www.mp-molds.com/product/mp-252-46-hp-pb/ But you should wait because this one if for .25 ACP and is a little bit too small for airgun barrels. Special mold for airgun barrels (same shape) will be available soon...
So basically what you're saying is that I require a 3d printer, a Huben K1 and some old barrel and I can make this myself? Challenge accepted! Now if only I had enough money for that Huben :(
😉Now this a pcp pistol non of that awfull looking bulky mess from FX or Evanix ..which are sold as pistols when they are clearly carbine's ..with a missing shoulder stock !!!🤣...do you have any future plans tor maybe selling Custom CNC parts for the huben pistol !!! thats legal right ???🤔
Hi. That was initial idea but there was several problem like: barrel would have to be in the kit (makes it not legal in some countries including Slovenia), not all K1 bodies have the mounting holes that are used for the trigger assemble (not consistent body design is a reason for a lot of problem), the kit would not be cheap and the fact you would have to use a quite expensive rifle to make the conversion would probably be too expensive for majority of people...
@@gregorkamensek3923 can u send me a parts kit my dime plus finder's fee Or a parts list so I can try and collect everything this is literally a marvelous invention and you could patten you build design make slot of money perhaps even talk to huben ?
You, sir, are an artist. And I do hope very much that Huben is paying attention, because if they're smart, this modification of yours is pure gold. I would buy one in a heartbeat.
Concordo. Envia para o Brasil? Parabéns
Where I find.
You need to get this made to sell to the public.
I had to make one myself!!!!! Easy
@@billdesmet3929 any video of yours?
Good news is its officially now manufactured by huben
You have done something outstanding! I hope you get the recognition that you deserve for such an accomplishment.
I also hope these go into full production, there is a huge demand for a pistol like this.
Nisam ljubitelj PCP pištolja. Smatram da ne opravdavaju cijenu. No obožavam pogledati svaki tvoj video na temu pcp- a čak i kad je o pištoljima riječ. Impresivan posao i snaga. Svaka čast.
Nice work Gregory. I agree that this pistol is small enough to really be called a pistol. 10 shots on the regulator is very good at 36fpe.
Nice one gregor i hope it might come in production one day. I would love to see it in action.
Great Gregor,as always !
You look to be getting more shots from that huben than I get from my leshiy 2.
Well done.
Now that a air pistol I want..really nice product..
Amazing! You know if huben makes one of these, I would have to buy.
I hope so :)
I hope also. The leshy 2 I thought is cool. But that one I think the trigger is better and accuracy because the fixed mag. Love it.
Hallo Gregor. Wird es diese Pistole von Huben jemals geben? Gruß kay
Thanks if it wasn't for you the gk1 wouldn't exist for the rest of us to purchase you are like a mad scientist
LOL, thanks :) I should grow my hair long again to fit into "mad scientist" category :)
I strongly encourage you to set a factory and begin mass production. It will be an absolute bestseller on airgun market.
You made the coolest airpistol i ever seen!!
Great job! But Most airgun manufactures seem to ignore demand and go right back to producing some tired same old long deer rifle looking airgun. If Huben doesn't get it, present your talent to their competitors. : )
Dear Huben :-), you could sell thousands of these, please produce them.
Ps , you ought to call them , THE K1amensek, and pass on a commission to Gregor.
Please Gregor I can not wait, Do the APC shoot well in the Rifle?.
Yes, The ACP will shoot well in the rifle but the size of the mold has to be bigger. I am working with MP molds to have them available and I will have a video when they are ready...
@@gregorkamensek3923 good man yerself.
We need this in a 308 with a little bit longer barrel, and 2x as much air. Also a larger plenum ect to tune the power.
As long as you don’t increase the barrel length very much like 30% and maybe move the whole action back a little farther so you can increase the barrel length without effecting the total length of the gun. Moving the action back might be a little difficult though I think it will be worth it. .308 or .357 with a 24mm barrel would be a beast of a gun
You are a really good gun smith, that's a beautiful build
Bro you are a true Airsmith 👍 I hope you make your own airgun one day because I'm sure it will be amazing
I'm just one more guy that will by it today. Start selling them soon😁
I would love to but that is impossible at the moment...
@@gregorkamensek3923 would you be willing to convert one for me? I’d pay of course. Or could you sell the plastic parts I couldn’t make, and sell me those plus instructions to convert a huben k1 myself?
Gregor, could not let commending on each episode! Have seen all three episodes today, and I am so stoked!! this is such a great piece of engineering! Kudos and I am saluting you for creating this! I hope that Huben will get in touch with you and make this happen!!! Sooner rather than later! So Huben, if you make this, you can have my money to share with Gregor! PS! make it so you can fit a moderator/suppressor. I am sure that DonnyFL would help you out with it.
Edited: Just saw you have another vid out with a moderator installed!! Brilliant!!!
We need this in .30 - .45cal
With a power tune, also placement of the mag should be farther back so you can get a longer barrel without increasing the actual length of the gun.
And the air capacity could be about 2x what is there. Even with 2x the air and in .3 this would be a magical system They are really on to something here with this gun!
30 at max that magazine can’t got any further back you’d have to mess with the internals I’d say put the magazine and air in the grip but this is a modified huben k1 not from the ground up
@@r3tr0ztail64 yeah that’s exactly what I’m saying I’m saying redesign the whole thing from the start! Using totally customized parts instead of starting from a huban
@@r3tr0ztail64 oh yeah and I totally agree with you I think they should utilize the grip either for some of the internals or as an extra air storage.
Wow .........pistol semi w/7" barrel 70fpe. I wish I had a Huben laying around to give it a go. Get job friend.
Hi Gregor. I’ve been shooting with my K1 2020 .25 with Nielson 33.5 grain slugs and it groups sub 2 moa in 75 yards. Reg. 130 & 42 clicks power wheel to the left. 900-910 FPS.
Yes, that sounds about right. But I get a bit better results with JSB Knockout probably because they are a little bigger (.251)...
Pink house......I doubt anyone is going question your manhood bro. You just built the best PCP pistol ever.....by far. These companies have whole teams that cant figure out how to get 30fpe pistol.
:)
Awesome stuff Gregor, I would love one of those, so much fun!
Nice shooting and great gun nice work, thanks for the video
Excellent work , I want one of these sooooo bad .
I would buy this anyday
Loved it. incredible!
I would love one of these
It's amazing I've never seen anything like this. I am from Mexico and I would like to buy it from you
mine is on the way ;-))))
Did You made tests: maximum effective turn energy knob (at fixed 170bars reg.) vs pellet weight? I think in higher weight, energy knob (power wheel) could be turn out some more :) regards
Actually no, because of the way this valve works. I talk about this extensively in my K1 and GK1 videos.
Ha! You indeed have a pink house 😅 Thanks for yet again an excellent video! Cheers.
:)
Question for the pro.
I have a 25 V3.
Ive seen shot strings with a 25 grain pellet set to around 30
FP shoot a pretty consistent string. First shot around 750, dips to about 725 and then back up to 750 again before tapering down. Average 25 fps spread through 2 mags which is fantastic.
Closest i got was 35 fps but only once.
Mine will start at 750, dip to 725 and then back up to 750 .. good so far. But then when the needle shows around 150 bar, instead of tapering down it will spike to 780-790 by shot 34 before tapering down. Spread goes from 30 to 60 in the last 6-7 shots (2nd mag)
Ive tried various adjustments 30 ft lbs, 35 ft lbs, even lower 20 ft lbs. all does the same. Spikes beyond original (first shot FPS)
Messing around, ive adjusted thw power screw 1/8 in at around shot 25. FPS is on the upswing by that point but hasn’t spiked yet. The adjustment lowers a 20 or so FPS but keeps it from spiking beyond 750 fps maintaining that 25-30 ES.
That sound about right. I think all pistols behave like this. The power/velocity curve is the same as if you would set any old unregulated rifle to lower power than it is capable off. The power spike at low pressure is only present with these lower power settings. You have 2 choices here (if your ultimate goal is consistency): keep the power setting and shoot down to only 150 bars (personally I don't recommend going to low with pressure anyway - you can see why in my "safety" video). Or you can increase the power to the power you get in the spike (of course, you will get less shots). In this case, the power will taper off, but I should also mention that taper off will appear at about 150 bars again, so you should still stop shooting at this pressure.
That's awesome that you were able to build your own pistol k1 style!!!!! Can you add a better air cylinder to achieve more shots than the 6 usable ones? Possibly a tank SMALL but more psi into it ??????
Here I have shown exactly what you asked in the comment form K1 :) Extreme power but not many shots. But I can select if I want more shots, I just turn the power down and vice versa. The very point of this pistol for me is that it is actual pistol and that it is not huge. But of course everyone has its own preference. My favorite setting is to shoot 10 shots per fill at 50 joule. That gives it some recoil (more than shooting with .22 LR pistol despite lower energy). It is also very accurate in this setting with .25 ACP slugs (45 grain hollow point). I also like that the magazine is not full, this contributes to safety, I don't want the pistol to have the slug in front of the valve until I ma ready to shoot...
Hello brother... like always you present the amazing stuff ...you are a real star ...keep it brother
This is really cool!
Where did you get your boat tail slug molds from. And acp slug. I would like to buy those.
This is a mold I designed and MP molds is selling it:
www.mp-molds.com/product/635-mm-air-rifle-pellet-8-cav-mold/
How much do these pistols cost I could really use one that would be great for pest control and close quarters
People are going crazy ovet this myself included😂 I want to build one but the huben pricetag is just something
SELL IT NOW WE WANT THEM
You are one smart man.i like you and respect you.
What I'm thinking is you could have a rifle in k1 or a
As soon gk1 as you run out of air switch to the other gunr more shots
Could you please tell me how can I buy Huben K1 pistol?
Great pistol how could we get one?
Why so low pressure? At 350bars energy should be higher? Am I right?
This is a prototype from which HUBEN GK1was born. At the time, I did not know what is the max working pressure of the action as the rifle from which the action was taken had a regulator with max 220 bar pressure. You can check GK1 and its capability where the max working pressure is actually 350 bars...
@@gregorkamensek3923 yes sorry, i missed that it was Yours prototype :)
Hi. Do I have to empty the regulator air to zero and put the gun aside after each use to keep the huben safe? I have a 2020 version of 6.35 caliber that has 2 manometers. Thank you for the answer
No.
@@gregorkamensek3923 thank you very much
Very nice and beautiful
Hello where can i buy ir in Europe?
Regards.
When do you arrive in Argentina?
very powerful and small
How can I buy that kind of huben pistol?
Hi Gregor. What is the autonomy in an average power? or what is the atonomy that the power that you adjust?
Thank you.
I usually shoot at about 48 j (35 fpe), that gives me 10 shots form about 260 bar fill. I can go lower on the power and get more of course but this is my typical setting.
@@gregorkamensek3923 Thaks you Gregor!!
Goddamnit Gregor. You've made our dream weapon....and we've gotta sit here loving it with zero recourse to purchase. Cold Blooded, hahahaha. Take this like and this subscribe...but I wish you'd take this Money
:)
Why is this not in production yet?
Hello from Chile.
It happens that I bought pressure gauges to measure the capacity of the tank, but I can't make a mark of what it really has since the needle is not at zero even though it is not installed in the rifle.
What can be ?
I have several huben and all the gauges that I buy are the same.
I hope someone can help me .
regards
Francisco
This does not necessarily mean that the gauge is faulty. You should install it and see if the values are correct for the working pressures; for example, it should accurate between 150 and 300 bars with some tolerances. Tolerances of these kind of gauges can be quite big, they are typically in a range of less than 10%...
If the gauge is way off in the working pressure area, then you have a faulty gauge.
hi can this pistol be purchaced
Sou do Brasil como faço pra ter uma dessa
This is a prototype I made...
Where do we buy that gun?
Where can you buy them at?
hi. how can i buy this gun?
Donde sé puede comprar está pistola
Berapa harganya brother
From indonesia
Gregor,gde mogu da kupim Huben?Ja sam iz bugarsko.
You can buy Huben K1 rifle here:
www.hubenairguns.shop/
When will it go on sale?
I want one of those sell it to me
When and where can I get one?
Would this shoot copper plated slugs? I would love to see you try it?
Yes, it can but as you can imagine, the energies are lower with them as there is higher friction due to harder slug coating.
@@gregorkamensek3923 do you know what sort of barrels are necessary for firing copper plated slugs.
Would a aea challenger work with .357 copper slugs?
Or would I want to get a new barrel?
Also I wish huban would start selling this pistol in .357 or 303 with a 22mm barrel (maybe even a little bigger idk) as well as a equivalently long air tank
@@gregmcb5305 Generally, every barrel should be capable to be used with copper plated slugs. Barrels are made out of steel and although the type of steel may vary, they are all much harder than copper (FX barrels may be an exception here, although I am pretty sure they are still much harder than copper). The question is why you would want to use copper plated slugs in an airgun? The reason why copper plated are used for firearms is mainly because of high velocity and problem with lead being too soft. For airgun velocities, lead is perfectly good enough actually even better; for accuracy you need certain tightness between the barrel and the slug and with copper, that would cause significant more friction and with airguns, we have no energy to waste on this... Also, the velocities will not be high enough for the lead to cause problems. So the barrels are not the reason why we do not shoot copper plated slug but rather other reasons... I would not suggest you to use copper plated slugs in the AEA guns. Because of higher friction, it might get stuck in the barrel...
@@gregorkamensek3923 The main reason I want to use copper plated rounds is so I can go hunting and not really have to worry about getting any lead in my meat.
Also allot of Ranges and hunting areas don’t allow you to use lead anymore. And plus I already have health problems without lead in the mix haha
I can also get 9mm copper plated slugs for 10c each which is a great deal compared to allot of air-rifle slugs out there haha.
Thanks so much bro you have helped me out so much!
The model coming out the gk1 better have the ability to get 60fpe like this gun even if you'll only get 10-15 rounds a fill. For the price being charged I better be able to get more than the 33fpe the .25 is told to be capable of. That's wimpy. Maybe a magazine of slugs with 50fpe is somewhat acceptable but when a $350 pistol that's only 9in long Nd only uses air cartediges not on board air tanks and it's getting 70-75fpe with a 180grain .457 slug. If I'ma pay the price they're charging for the huben pistol it should either come with a barrel thatz 3-4in longer and be adjustable foe more power to get the 50+fpe range with 10-17shors a fill
Well, we will see. There are no data on the .25 out yet, but I am fairly confident that Huben will be modest in the specs, they typically give slightly lower figures. I think that the gun will be speced to about 45 fpe with some standard pellet, but will give out more with heavier low friction slugs. Remember that I was just barely able to get 60 fpe with my slugs V2 for K1. This number is about as close you can get in theory with such short barrel if you want more than one shot, I really does not matter how you feel about it, you cannot win an argument with physics (I mean no offence to you) :). When you have a certain limited pressure, it can only create a certain force based on the surface area (caliber) and this force will cause a limited acceleration in limited length of the barrel. We are using about 200 bars, even a round like .25ACP has more than a thousand bars (from WIKI, .25ACP creates 1700 bars). Bigger caliber will always create bigger energies because same pressure creates bigger force (the potential power is increased with caliber squared since it depends on the surface area). There are other limited factors like sonic speed of the air exc... but I am getting was too deep :)
Hi. where can I buy?
If you could make the parts people will buy as well as me.
How much in us money,to make pistol? I want one...
Where do I buy this?
I have a k1 I am having converted now I haven't heard back from the fellow but if you're interested I will ship it to you if I can't get it done here how can I make contact with you
Sorry, I cannot do that.
Is it make of we big china??
Build series???
Do you think gregor that it can be in production one day? It looks very professional though
I hope so... Although it is kinda cool that I am the only one that has it... I little bit of narcissism from my side :)
@@gregorkamensek3923 if you can make one for me i pay you very well. I am a huge fan of huben k1 .22. I own one with a mold from mpmolds aswell. It sure is a unique experience that you are the only one. But coming back on making one. I am willing to pay very good. Tell me if you like it
@@markpoepiloeri8511 I appreciate your gesture but I am afraid I cannot do this...
@@gregorkamensek3923 y not I'll send u my huben k1 2018 .2499 and I'll pay for any parts up front as well as shipping and once you have completed it you can charge me the labor and send it back no over head I need this it will change things for everyone no one can be denied self preservation I would even be down to fund a .30 huben build big bore hammerless semi auto pcp pistol come on we need this available to buy how can we help you make it happen can u send me a parts list so I can try to put one together
WHERE CAN I BUY IT?
Wow
WOW
Please review ataman ap16
I have tried to arrange with Ataman to get one AP16 for testing but nothing hast come out of it...
Man can I buy one from u
Hi were can i bay the mold plz
Slugs mold
@@omarzolo6689 This is the mold: www.mp-molds.com/product/mp-252-46-hp-pb/
But you should wait because this one if for .25 ACP and is a little bit too small for airgun barrels. Special mold for airgun barrels (same shape) will be available soon...
@@gregorkamensek3923 great i hop that will be good thank s bro
Mold 22 and 25 i am waiting lolll see me news
👍
I'll send you my huben and pay you to build me one
So basically what you're saying is that I require a 3d printer, a Huben K1 and some old barrel and I can make this myself? Challenge accepted! Now if only I had enough money for that Huben :(
Please if you sell him I will buy you
Sorry, I am not selling them...
For sale???
No.
@@gregorkamensek3923 will you do a build series
😉Now this a pcp pistol non of that awfull looking bulky mess from FX or Evanix ..which are sold as pistols when they are clearly carbine's ..with a missing shoulder stock !!!🤣...do you have any future plans tor maybe selling Custom CNC parts for the huben pistol !!! thats legal right ???🤔
Hi. That was initial idea but there was several problem like: barrel would have to be in the kit (makes it not legal in some countries including Slovenia), not all K1 bodies have the mounting holes that are used for the trigger assemble (not consistent body design is a reason for a lot of problem), the kit would not be cheap and the fact you would have to use a quite expensive rifle to make the conversion would probably be too expensive for majority of people...
你好，请问你在哪个国家？
Slovenia :)
@@gregorkamensek3923 我们国家这个也用这个铅蛋，它叫小米！
I really like the rifle you have. !!
I am from Indonesia
send it for friendship or we become brothers. but caliber 4.5
Very nice. would you consider building one for me? if yes i will send you my private contact info a we can discuss. thank you.
Sorry, but I cannot.
@@gregorkamensek3923 I understand 😞
@@gregorkamensek3923 can u send me a parts kit my dime plus finder's fee
Or a parts list so I can try and collect everything this is literally a marvelous invention and you could patten you build design make slot of money perhaps even talk to huben ?
Get a 2 inches longer tank and put a regulator in it
There is a reg in it Chris.
Serounded by girls and a pink house😣😂
Yep
Please sell me one xD
Email me I will gladly buy one👍