James is here to take you through an unboxing and assembly of the new Freewing L-39 Albatros. Find product links below: PNP: www.motionrc.com/products/fre... ARF+: www.motionrc.com/products/fre...
Can't wait to get my hands on one here in the UK just got the f4 phantom smiling from ear to ear with this plane . That L39 GOING TO BE JUST AS SWEET 😉👍👍👍👍👍
Great build video ! I want one of these babies hey ! Looking forward to Petrincic Aviation’s flight review of this model too. I just know Pilot Robert will purchase one immediately ! 🤣 Sorry about your crash. 😞
Awesome vid James! Good information, I really enjoyed watching this build. Looks like Motionrc/FW brought quality another step higher. Greetings from Belgium (Icarus the 2nd)
Thanks so much! This assembly was so simple (which I prefer) and she truly is a great trainer jet. No bad tendencies and a broad flight envelope to have a lot of fun with
I am wondering how difficult it is going to be to remove the decals if some of us will be doing a different scheme, I had to strip the paint because the decals pulled the paint off on my F-104...
After a successful maiden with my BAe Hawk, I am drooling over the possibility of flying this plane! James, now that you have flown the L-39 a lot, how do you like it brother, and how does it compare to the Hawk?
The L-39 is a dream. It's just a rock solid flyer capable of slow speed which is great for landings. You can land it like a prop plane if you want. Our field is a fishbowl where you have to turn into landings and stalling is usually a concern with EDF's but the L-39 does it with ease.
Hello, RCMotion crew, I recently preordered this Freewing L-39 Albatros 80mm EDF Jet - PNP at RC Motion website, and I’m interested in getting a canopy 3D printed that I saw on this video for this airplane, could I get a link where I can purchase it?
please give me a link to the 3d printed parts...also I am an FPV pilot,,,you need to make these more fpv ready... Like no pilot figure, no canopy plastic, and better interior,,,where is the link to 3d printed parts please?
Stop breaking stuff James. I do enough of that on my channel. So I just did a sick paint job on my L39. It's not quite done yet, however you can check her out on my TH-cam channel. Dave's Rc. Also I would like to send you the maiden flight video so I can give you a fan flight. Thanks James. You rock brother. Sorry about your L39. I just lost my 80mm sabre and I cant find her anywhere. Lost orientation. By by sabre hahaha
![[TH] VCT Pacific Stage 2 - Week 4 Day 1 // PRX vs RRQ | GE vs GEN](http://i.ytimg.com/vi/iIi2_04jGr0/mqdefault.jpg)
Freewing is setting a whole new standard in this industry!!!
These new Freewing "Builds" are getting ridiculously easy haha! Super clean design... Another great job guys! 👍😎🙂
"Builds" right? Build is a better word than Assembly, but I much prefer to get her out of the box and out to the field asap
@@MotionRC "Magic" 😄
There simply isn't any competitor that comes close to Freewing as far as quality and value goes. Just awesome stuff.
The most locked in plane I’ve ever known. Perfect first jet.
Looks awesome. Motion please an F-22 Raptor 80mm. I promise it will sell like hot cakes.
frosty eight I want this or a 70mm F-22!
Can't wait to get my hands on one here in the UK just got the f4 phantom smiling from ear to ear with this plane . That L39 GOING TO BE JUST AS SWEET 😉👍👍👍👍👍
Great build video ! I want one of these babies hey ! Looking forward to Petrincic Aviation’s flight review of this model too. I just know Pilot Robert will purchase one immediately ! 🤣 Sorry about your crash. 😞
Gorgeous airframe and livery! Really cool how you guys went with a color scheme familiar to your EU customers :)
Andrew Williams all part of the master plan 😉
Great Build Video, and thanks for being so honest about the outcome of that plane. Cracked me up... LOLOL
Thumbs up guys.
This is sure first buy from motion Rc!
Awesome vid James! Good information, I really enjoyed watching this build. Looks like Motionrc/FW brought quality another step higher. Greetings from Belgium (Icarus the 2nd)
Thanks so much! This assembly was so simple (which I prefer) and she truly is a great trainer jet. No bad tendencies and a broad flight envelope to have a lot of fun with
Sharp looking and seems to be very smooth. 👍
DeucesWild RC Is this going to be your next jet? ;)
Not crazy about the paint colors/scheme, hope they offer another option, and I hope they come out with a T-33
This one is tempting... :D
You guys are gonna make me have to buy a storage facility for planes! Lol. Like a closed down old walmart building! Hahaha
There's plenty of closed Circuit Cities around!
@@MotionRC yes!
I am wondering how difficult it is going to be to remove the decals if some of us will be doing a different scheme, I had to strip the paint because the decals pulled the paint off on my F-104...
L-39 OR Avanti S? And why mix flaps and elevators? If you pull up, the flaps will retract causing an increase in speed and decrease in lift.
After a successful maiden with my BAe Hawk, I am drooling over the possibility of flying this plane! James, now that you have flown the L-39 a lot, how do you like it brother, and how does it compare to the Hawk?
The L-39 is a dream. It's just a rock solid flyer capable of slow speed which is great for landings. You can land it like a prop plane if you want. Our field is a fishbowl where you have to turn into landings and stalling is usually a concern with EDF's but the L-39 does it with ease.
Hello, RCMotion crew, I recently preordered this Freewing L-39 Albatros 80mm EDF Jet - PNP at RC Motion website, and I’m interested in getting a canopy 3D printed that I saw on this video for this airplane, could I get a link where I can purchase it?
as soon as they come available we will let everyone know. Close to the time they arrive in stock, we don't pre-order parts, just the aircraft
Hello,
Is the kit mounted in this video are ARF or PNP ?
this is the PNP Assembly
I did the same thing to my fms p40
Where’s the T-33?
cam for this video?
Not bad
please give me a link to the 3d printed parts...also I am an FPV pilot,,,you need to make these more fpv ready... Like no pilot figure, no canopy plastic, and better interior,,,where is the link to 3d printed parts please?
any 3d printed files for any aircraft are on the support tab on the product page
Why don’t you guys have an option to buy it in white for us guys that like to do our own paint schemes?
Sadly the numbers don't lie. Those aircraft barely move
Stop breaking stuff James. I do enough of that on my channel. So I just did a sick paint job on my L39. It's not quite done yet, however you can check her out on my TH-cam channel. Dave's Rc. Also I would like to send you the maiden flight video so I can give you a fan flight. Thanks James. You rock brother. Sorry about your L39. I just lost my 80mm sabre and I cant find her anywhere. Lost orientation. By by sabre hahaha
can i connect with s bus the board control?
Thanks!
Pitot Tube not a gun at 12:07 lol
Book mistake, but I got her right
Well spotted;-)
Send me the wrecked one I’ll fix it like new!
That was easy bill too bad you crashed out pretty plain well I guess you just going to have to put it back together good luck man
Already back together and this one will get a custom scheme now. Just waiting on canopies to come in stock to finisher her off
Where is Ryan and Mike ???????????????
Why no response James ???
Pilot error for not checking the Weight and Balance. preflight inspection epic fail.
No survivors
Rookie
More foam in China 😂