This video helped me out a lot, I have the grapple built and I was planning to make deviders to make it an accumulator/grapple but after seeing your setup I’m questioning what to do. Could you talk about your accumulator and how it works? Thanks
I have 2 Different kinds I build one that i use on the loader that I just push around gathering up the bales into groups of 8 and when I am finished I hook the grapple up and load all the packs onto trailer. The other I drag behind my baler and when it gets 8 bales it dumps them. They both have their purpose I guess.
Ask all you want no bother glade it helped you get one built. I can’t rember what length hoses I used but I am using mine on a tractor with the hydraulic fitting closer to the bucket then what would be on a skid steer or factory 3rd function on a tractor. I just used a flexible measuring tape like for measuring fabric and tilted grapple all the way up and down to see what length hoses I needed.
Nice build. As measured from the front, back to the "skid steer plate", what are the measurements (on center) of the pivoting bars that the hay hooks attach to. I'l like to try to build one of these. Great job.
did you attach your 3x3 tubing base (the part that has the skid steer plate welded to it) and the actual grapple part together on an angle? Or is it at a 90? Thannks, awsome build
@@MrRanger518 does that seem to be about right or would you reccomend something different? Also do you think a 10 bale is to big for a skid steer with a 1300lb lifting capacity? not sure what you use on yours
What did you end up with for the final width of each individual channel the bales slide in? I'm just trying to decide how much space is really needed for the bale to slide into with little fuss. I'm thinking of running about bale width +3 inches.
Great job
Thanks for sharing, you will be helping a lot of small farmers. (30 acres of Bermuda for horses)
Nicely done! One of the better looking hay grapples I've seen. Thanks for sharing
Nice work, very clean build!
Nice build. Looks good. Thanks for sharing. Have a good one
This video helped me out a lot, I have the grapple built and I was planning to make deviders to make it an accumulator/grapple but after seeing your setup I’m questioning what to do. Could you talk about your accumulator and how it works? Thanks
I have 2 Different kinds I build one that i use on the loader that I just push around gathering up the bales into groups of 8 and when I am finished I hook the grapple up and load all the packs onto trailer. The other I drag behind my baler and when it gets 8 bales it dumps them. They both have their purpose I guess.
@@MrRanger518 okay last question and then Ill stop bothering you haha what length hose did you use? 5'?
Ask all you want no bother glade it helped you get one built. I can’t rember what length hoses I used but I am using mine on a tractor with the hydraulic fitting closer to the bucket then what would be on a skid steer or factory 3rd function on a tractor. I just used a flexible measuring tape like for measuring fabric and tilted grapple all the way up and down to see what length hoses I needed.
Nice build. As measured from the front, back to the "skid steer plate", what are the measurements (on center) of the pivoting bars that the hay hooks attach to. I'l like to try to build one of these. Great job.
Could you add a small video on the spacing of the bars with the tines to grab the bales?
did you attach your 3x3 tubing base (the part that has the skid steer plate welded to it) and the actual grapple part together on an angle? Or is it at a 90? Thannks, awsome build
Yes I put it at a angle so I would have a little more tilt with it. I believe it is at 15deg angle.
@@MrRanger518 does that seem to be about right or would you reccomend something different? Also do you think a 10 bale is to big for a skid steer with a 1300lb lifting capacity? not sure what you use on yours
What did you end up with for the final width of each individual channel the bales slide in? I'm just trying to decide how much space is really needed for the bale to slide into with little fuss. I'm thinking of running about bale width +3 inches.
Nice job.
And as a side note, do you bale and drop on edge, or flat on the strings?
Do you have a schematic of this build and dimensions you would be willing to share ? I'm looking at building one of these and liked the one you built
Have an idea of final cost to build? Thinking about building on vs buying.
If you had to buy all the materials I would say you will be in the $1,000 range
If you had to buy all the materials I would say you will be in the $1,000 range
Where did you get the “sickles” or “grapples” from? I can’t seem to find any.
www.agrisupply.com/hay-grapple-hook/p/68279/?sid=asf10&eid=Easf10&zmam=77232640&zmas=1&zmac=1&zmap=68279&eid=gl020116&sid=google&gclid=EAIaIQobChMI6umDmvfb9AIV0xPUAR000AcHEAQYASABEgKU5PD_BwE
Where did you get your hooks
Agri supply
Would you sell me the plans printed on paper
WHere did you get the bale hooks from?
Ebay has them.
have you used it. do you have a video?
Yep I use it all the time. But have not made a video yet
Yep I use it all the time. But have not made a video yet
Yep I use it all the time. But have not made a video yet
Yep I use it all the time. But have not made a video yet
Yep I use it all the time. But have not made a video yet
Agri supply
I built mine.....there not cheap to build
Nope they are not cheap to build or buy. Especially Now.