Heavy Duty 3000 lb Automotive Rotisserie - Great for Car & Truck Restorations - Eastwood

Scott goes over the Eastwood 3000 lb Rotisserie, a must-have for doing a restoration on a car or truck!
BUY Rotisserie - www.eastwood.com/eastwood-300...
Looking for professional results on your project car? Then why not work on your project like a professional.
THE EASTWOOD 3000 LB CAPACITY ROTISSERIE FEATURES:
Heavy Gauge Steel Components
Six 4" Swivel and Locking Casters
Total Weight Capacity 3000 Lbs
Low-Friction Spindle Design
Fine Tuning Height and Balance Adjustments
Generous 18' Maximum Span
The Eastwood 3000lb Rotisserie is the perfect way for you to be able to access every side of the vehicle for a true professional restoration. Fabricate a few mounts to attach your project to the universal arms and you are ready to lift and spin your project towards completion.
Max Weight Capacity Total Unit - 3000 lbs (1630kg)
Max Weight Capacity per End - 1500 lbs (680kg)
Max Extended Capacity - 18" (5.5m) Face to Face of "Tee" Beams
Overall Spindle Height (center line of vehicle) - 5" (1.5m)
Overall Max Extended Length - 22" (6.7m)
Overall Max Extended Width - 70" (1.78m)
Shipping weight - 538 Lbs
For more information on Eastwood products visit www.eastwood.com or stay connected with the team via:
Facebook - / eastwoodcompany
Instagram - / eastwoodco
Blog - www.eastwood.com/blog
Since 1978 Eastwood has been supplying products to the people who want to do the job right. Eastwood offers a complete line of hand tools, welders, plasma cutters & accessories, metal working tools, powder coating supplies, paint and paint guns, specialty paints and hard to find products, all for the DIY-er. Eastwood has all the tools and supplies you need to restore your car, truck or motorcycle.

[@FixItNick]

Rotisserie makes restorations 10x faster and 100x easier

[@darricksublet9833]

P

[@transformfunilariaeserralh361]

Fantástico...

[@peerplaut]

I have a 1966 International Travelall I am working on. What is the longest body you can work with? Also, what is the tallest body you can completely roll?

[@lucianovaleria4902]

Blz meu amigo muito bom de trabalhar

[@RecklessRegal]

What is the maximum height adjustment?

[@andreyamin4790]

Could use for Mercedes Benz w120 ponton series restoration like 180 ,180a,180b,180c,w121 190 ,190b ,190 SL ,etc ?

[@michaelburry8332]

Would it take an insanely strong rotisserie to be able to leave an engine in a vehicle? (I realize you wouldn't want to turn it upside down (oil and trans fluids, even if they were drained) but for tipping it 45 degrees for a repeat installation of some complicated metalwork, is there a Rotisserie capable of this, or would one have to build their own...?

[@danmallery9142]

I don't think you would want to do that. It would be nearly impossible to get the centerline weight distribution correct. You do not want one of these out of balance. They do make heavier duty rotisseries though. I think Titan makes a 4500# one. 3000# isn't bad though. By the time you get the body stripped down to the point where you could work on things that you would buy a rotisserie for, it would be enough in most cases. I bet that Camaro tub in the video weighs 1000# or less.

[@kennedywong9854]

How much for it and does come in red?

[@peerplaut]

My rotisserie is coming tomorrow. Where is the video to get the body onto the rotisserie? Do yo start with the body on the floor? Do you put the body on jack stands and then slide the rotisserie under the body? Thanks!

[@juny_adame3153]

How is it you put the body on yet

[@peerplaut]

@@juny_adame3153 I ended up getting the thing on. I welded some jack stands to some rolling dollies. I used my engine hoist to bring up the front, bring up the back. Occasionally I might need to use a floor jack to help out in a corner. You have to have a rolling dolly or the jack stands will knock over. Trust me on this. ;) Once I got the body high enough to get the rotisserie under the body, I started assembling the rotisserie. I ended up welding p my own mounts, using the stubs that came with the kit. While this process was slow, it took me all day. ) I got the thing mounted up. I have rotated the body, moved it around the shop! I'm as happy as a clam in mud! ~P.

[@horaciogonzalez8160]

2,299.00 for those of you asking for the price

[@Limeayy]

how bout imports?

[@importsstillsuck]

What about them?

[@Limeayy]

@@importsstillsuck lmao @ your name.

[@hankstopher]

I highly doubt those rollers work the way they were intended

[@georgeshotrodbarn2113]

But can it BBQ

[@4speed3pedals]

Buy it, get no support from Eastwood. Screw them.